ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2015
- Amazon link:
amzn.to/1SULa7K
Link to velour earpads on Massdrop:
www.massdrop.com/buy/ath-m50x...
Massdrop invite link:
www.massdrop.com/r/5LHMN7
Stock pleather earpads Amazon link:
amzn.to/1Pi1xMX
======================
rhinofeed.com
/ nathaniel_h
/ rhinofeed
google.com/+Rhinofeed
Music:
Wanderflux - Visions: • Wanderflux - Visions [... - วิทยาศาสตร์และเทคโนโลยี
![ช่วยพาฉันผ่านเวลา - วสันต์17 [Official MV]](http://i.ytimg.com/vi/HFnntWoqc54/mqdefault.jpg)
I just got a pair of Velour Earpads on Mass Drop for my M50x.. I'm very happy :D! thank you for helping me decide on these!!!
Just did the same thing, same Massdrop, same colour, on my ATH-M40's!! Looks and feels fantastic!!
Thank you I have been looking everywhere for a video for my Audio Technica BPHS1 and this help me replace the earpads.
Man, your intro beat sounded amazing in my ATH-M50X's my goodness!
TechTyler m40x > m50x
TechTyler sound is subjective just my opinion
did the intro music blow anyone elses ear drums?
I know better than to watch TH-cam videos on headphones without vetting them first. XD
You're intro got me hooked then the video came, Quick and clear no bs. Came for a good review knowing if i should buy them. Well thanks to you i'm buying them.
I do think you should at the end of the intro end it with a bang not fade out.
Sir, you may have my like. Also subbed
Thank you! Thanks for the idea on the intro transition. I'll look into other transitions and see if there is anything cool.
How about the headband cushions? Mine's starting to crack, is there anyway that you could do a tutorial on how to replace them?
Nice video! Thank you for uploading
with the athm50 the stock pads have a trebel killing foam in it, if you replace the pads i highly recommend cutting that out and upping it in the new pads. Ath m50 have aggressive trebel thats for sure.
Excellent vid. Thanks for the assistance in trying these out and sharing your findings with us. They look of far better quality than the OEM pads but you didn't comment on whether
they alter the sound through the drivers. The material is different, they're plusher, and therefore may absorb sound differently than the pleather ones. I assume there was no change.
You don't get the same bass with the velour earpads. Too bad, because looks nice...
Can you replace the top thingy( the part that connects both ear pads at the top where it says "audio techica"), mines is starting to wear and I might need to replace that too if possible
if it is tight fit for m50x, then it will fit perfectly on the previous smaller model
Thank you!
Are these thicker padding? I need something to replace the original pads because the original hurt my ears a bit after a while.
I want to replace the earpads of my m50x but idk which one to buy from pleather, velour to hybrid. I want to have better noise isolation and that can give a tad bit of sound stage. Lesser bass is fine as long as it won't make the sound quality muddy. What would u prefer?
How did these hold up over time?
ok i have a question. can i change my turtle beach ear force stealth 500x ear cushion on a leather ones? If you know one please comment.
"This product may only be shipped inside the United States"...Guess I won't be buying them then..
+nox i Awww, that's a bummer. Try this: www.soundprofessionals.com/cgi-bin/gold/item/AT-135409020-VELVET
It's the original source for the product. Of course because it's not being run through Massdrop it is more expensive. :(
+Rhinofeed Hmm, I'll think I'll skip, but thanks anyway. The main reason I don't use my ATH-M50's a lot is because they're not very comfortable, both on the ears and at the top of the head.
do the velour cushions last longer than the stock ones?
nox i thas what you get for not being american
Hello
What sizes do these ear pads have?
I'm looking for ear pads for Technics RP-HT300 headphones.
Thank you
my black ear cups leather is coming off? i use it daily watching movies music on the go?from ath m50x..it looks bigger the red ones..
These or cooling gel earpads to get the best cooling
how are these compared to brainwavz velour?
Terrible Sound but Comfortable- The velour eliminates the air seal, reducing the bass performance to unacceptable levels.
Brad Berlin Thanks. I was wondering about that.
Yup, Brad is right. I got a pair of these and... a big thumb down...
Any pad will ruin the m50’s sound now shhhhhhhhhhhhhhh
can u change it on ath-m20
do these fit the m30x?
Hi! Great Vid! May I ask how does it sound compare to the stock ones? Does it sit on your ear comfortably for long hours?
Zapp Brannigan approves.
Nice i have the beyer t5p just burned them in but don't use them to tell you the truth. Perhaps il sell them. I do like the ath m50x.
Good taste in headphones. Great taste in keyboards. My kind of channel hahahah keep up the great work. ;-) what do you think of the KUL es-87 I'm exchanging mine because of the ping noises it makes it's like a bloody symphony. Hahahah
Thank god my Leopold fc660m also mx clear is nice and silent. Of course both PBT keycaps from massdrop. That 's how we roll ;-)
How does the velour affect the sound at all? you heared a diffrence between velour and leather
+Georg Zechozkyy Bigger soundstage. Not much that I've noticed beyond that.
+Georg Zechozkyy They actually do effect the sound, because the sound is sealed by a material and that it wasn't designed for. The sound bouncing off the velour would be a different reflection from p-leather. However your/our ears can't distinguish from such subtle differences, so the sound you perceive from the drivers are the same, and the sound bouncing from the velour is so similar it might as well be the same. So p-leather vs velour is essentially the same sound.
However, they do have a minor-impact on sound leakage, which is a con or plus depending on who you are.
By sacrificing a little bit of the sound isolation, you get more comfortable, less over-heating experience. Its a nice trade-off, but you have to figure out for yourself if its worth the $20
+Miku Ivalice This were designed to maintain the original sound signature of the M50x, but there is a slight difference. Soundstage is wider and the bass and treble are toned down a bit - midrange sounds more natural and forward as a result. Overall however they are quite similar to how they sound with the stock pads - Brainwavz earpads may be better if you really want to tone down the bass.
I have mixed feelings for these on the MSR7 though - HUGE soundstage but bass is more rolled off and midrange is sibilant at times (I was never really bothered about sibilance on the MSR7 stock).
No man you doing it wrong :) When get harder, put three(two) middle fingers under the foam in inner side of pads and stretch it from there. You will see how easy is then :)
Will these work with the M50x's
MeatSheeld yes it will.
Dislike those leather ones. Very uncomfortable and stick to my outer ears. Great video. Thanks
do these change the sound of the headphones in any way?
no perhaps i feel the detail is more, btw mine's black colour
doesit fit on the ath m40x
Yes, they do! www.soundprofessionals.com/cgi-bin/gold/item/AT-135409020-VELVET
This ruins the sound imo. The bass decreases and the overall sound signature shifts towards the higher frequencies. Guess im gonna stick with the stock earpads...
how do these compare to the brainwavz ear pads?
i might consider this for durability because velour is washable and don't wreck soon not like synthetic leather
Changed to Velours on my ATH-M50s and completely lost the bass.
This works with ATH M40x too?
work on every m series i think because their driver size similar
the headband of my audio technica m50x now have some cracks.. how to avoid it??
Ronald Castillo same here...I love ath but what I dont get is why they keep on putting these headband cushions that is so easy to break...I dont get it...my earpads are still very fine after 2 years but my cushions on the headband is starting to crack and its annoying
Vipe Jay mine too! i think it’s because my room is always in hot temperature and lacks humidity, that caused cracking.. isnit replaceable?
the headband can be replaced ..but it requires soldering you can order the part from audiotechnia (you maybe be able to have them do the replacement as well..not sure of cost for that)..
I ordered the part 381303270 from at.. and did the replacement.. I made a video overview of the procedure: (part cost $23.65 and $13 shipping)
th-cam.com/video/h8cOxJmhm_Q/w-d-xo.html
alternately another solution is to buy a cheap cover (you can find them on amazon /ebay that zips over the old cracking headband.
As far as avoiding the cracking...probably using faux leather conditioner will help .. but isn't going to fix already cracked /flaking headbands certainly.
im watching on my m50x
Was expecting a review of feel and sound quality. What a waste of time. Thank god i watched this on double speed and FF several times.
Don't change the stock...it affects the sound signature...
Random music FTW!
+im naK™ I threw that in at the last minute and I'm glad I did.
+Rhinofeed What's the name of the song?
does it leak more with the velour ones compared to the leather?
good question
Horizons I have them now, they are fucking awesome and the sound quality doesn't get lost (maybe some minimal loss but you won't notice)
After 3 months, are they still equally comfortable?
Anubhav Saxena pads are a bit more pressed in (= thinner now) but for the most part still good.
wait did you get the pleather or velour ones, (im worried if i get new earpads the sound will go down)
I think this one is good, but definitely not as good as the MSR7 pads.
+PTNOPOT I really want to try the MSR7s. They look good, and I bet they sound good too.
They are definitely good sound, one of the best I own. If you want to check out some other pads for your M50s, the Brainwavz HM5 pleather pads are great.
+PTNOPOT Sweet, I'll take note of that. Thanks!
+PTNOPOT I don't like the MSR7 pads a lot. They are too shallow. Brainwavz pads is king.
+PTNOPOT I was a bit disappointed using these pads on the MSR7. The soundstage is much more open but then the bass is rolled off a lot and the highs and mids are sibilant. I didn't even think the MSR7 were sibilant when I use the stock pads... I think it's because SoundPro pads fit a bit too loosely on the MSR7 - they should make smaller pads.
Does it ruin the sound?...
no perhaps improve a bit in sound and comfort
next time just twist them on
i wonder if there is a chinese young fella doing this everyday watching this and judging silently...
dafuq is that website? i need a store to buy from not a freaking wait list vip bull shit
+eurosonly Sorry, here is a link to Amazon. amzn.to/1SULa7K
damb
Fucking Massdrop... Why cant i look at it without being logged in? What difference does it make?
For anyone who cares, pout this at the end of the link
?mode=guest_open
Seriously. Why is a video needed for this ?
Why are you here then
@@Mahiro497 Destroyed.