Nice work buddy, but quite dangerous. Why dont you make a push pedal type toe switch, so wen u want to break the wood u tap it with your toe and the device starts to turn. Wen u let go, device will stop. That way more safe.
Felicitaciones bonita maquina,pero muy muy peligrosa,primero deberias bajar la velocidad de giro con un reductor y lo otro colocar un boton mas de emergencia mas al alcance de alguien que pueda socorrerte si la maquina te agarra la mano o el brazo...saludos amigo desde chile.
A bit quick that axe blade don't you think? I would slow it down, presuming the motor has enough torque and the easiest way is to fiddle about with the pulley sizes.
Although rare, damage can be done to the motor when it is attached to the frame while welding. Stray current can flow through the windings. It’s better to remove the motor when welding.
Топор надо сделать каб рубил на четыре части, а то и на восемь. Как у промышленных дровоколов. мощности хватит если сбавить обороы и повысить усилие на валу
There's no doubting your ingenuity but Three Phase wiring without so much as a gland or proper cable anchors? No chain guard either! Your chain-drive would easily take a hand off!!
I have similar project like this but with 3 phase 750w 700Nm electric motor 1360 rpm reduced with drivetrain to 8 rpm on axe. But I will use direct conection without belt.
As soon as I find a gear reduction box I am going to make me one of these I’m in to build an outdoor furnaces and log splitters and fireplace. Heat exchanger but I’m going to build this thank you
I've split 5 cords through it so far. Does what I need it to. th-cam.com/users/postUgkxUyQswtttSffRMblGbrhCvZn7JkhtG1-7 I scrounge all my firewood and am not equipped to handle big wood, but for logs up to 24 inch diameter or so, it works great. I've been amazed by some of the gnarly bur oak and elm crotches it has split. For the tougher stuff within it's size range, you might have to study the piece a bit to decide the best attack, but if you split smart it's up to the job. It did arrive low on oil, and I was would have nicked it half a star for that, but it has regained my full confidence. UPDATE NOVEMBER 2021: Still going strong after all these years. I love the one-handed operation. Hope it's still in production if I ever need to replace it
На редуктор поставь шкиф побольше, чтоб обороты уменьшить, а сила увеличится.
Nice work buddy, but quite dangerous. Why dont you make a push pedal type toe switch, so wen u want to break the wood u tap it with your toe and the device starts to turn. Wen u let go, device will stop. That way more safe.
Felicitaciones bonita maquina,pero muy muy peligrosa,primero deberias bajar la velocidad de giro con un reductor y lo otro colocar un boton mas de emergencia mas al alcance de alguien que pueda socorrerte si la maquina te agarra la mano o el brazo...saludos amigo desde chile.
Thumbs up if you’ve still got 2 thumbs!
Good work👍👍👍🍻
Thanks bro
Зменшити оберти і. буде супер 👍
Hahaha, this is like medieval torture device for wood 😀
😁😁👍😉
esta muy buena la maquina pero va demasiado rápido, great work
Thanks a lot
A bit quick that axe blade don't you think? I would slow it down, presuming the motor has enough torque and the easiest way is to fiddle about with the pulley sizes.
Классный дровакол!
Шпонку болгаркой?!! Виртуозно.
Автор прошло два года ?!!
Ты ещё живой???🤣🤣🤣
Отзовись!!!
🤣🤣🤣🖐🖐🖐😉👍
Leave a comment here 👇👇👇
Thanks for your support
Like SHARE and Subscribe
Thank you 😉👍
Zagen zonder beschermkap is levensgevaarlijk.
Real deal chopper well done bro ,
Good job I wonder if OSHA would approve. I,know I,do
Although rare, damage can be done to the motor when it is attached to the frame while welding. Stray current can flow through the windings. It’s better to remove the motor when welding.
Awesome, any ideas where to find a gearbox like that?
WHATS THE WOOD FOR? TOO SMALL FOR HEATING, LINCOLN LOGS?
That machine is all most to dangerous to be safe ! I love it 👍👍👍.
I GUESS ALRIGHT IF YOU'RE NOT SERIOUS ABOUT DOING FIRE WOOD TO LAST YOU A WINTER.
What mortor use for this machine
Топор надо сделать каб рубил на четыре части, а то и на восемь. Как у промышленных дровоколов. мощности хватит если сбавить обороы и повысить усилие на валу
Video klass, super! 👍👍👍🔥🙏
Looks lethal 😂
Fun project
There's no doubting your ingenuity but Three Phase wiring without so much as a gland or proper cable anchors? No chain guard either! Your chain-drive would easily take a hand off!!
I have similar project like this but with 3 phase 750w 700Nm electric motor 1360 rpm reduced with drivetrain to 8 rpm on axe.
But I will use direct conection without belt.
fuerza centrifuga, netamente peligroso para las manos, yo estaba pensando en la broca cónica
А конеческое сверло безопасно?
Классный агрегат супер!!!
Слишком высокие обороты, и так же нужен натяжитель ремня
would the motor need to be a 3 phase one or what kind of hp would it need to be? this would be perfect for a wood chunker that I would like to make
Bravo soprattutto per la sicurezza ,quella l hai messa prima di tutto👍
Big like
Thanks
аппарат классный но пальцев только десять и они не отрастают
Nice work 🎉
Thanks 🔥
What did that old gear reducer come out of?
I don't know bro really i found that 😉👍
Молодец. Лайк
By force or 220v
Motor hp?
You can make wood splitter with motor and reducer. Nice video
Yes thanks
I think the speed should be slightly reduced for better safety.
Yes bro thanks
У редуктора корпус алюминевый?
As soon as I find a gear reduction box I am going to make me one of these I’m in to build an outdoor furnaces and log splitters and fireplace. Heat exchanger but I’m going to build this thank you
Thanks a lot
Здорово.
👍
Чёткий агрегат.Тока у меня шота булки сжимаюца .
Добрый день, на продажу есть у вас такой дровокол?
no bro
@@MrDKDIY 🙌🏻
I have 6hp motor. When my axe touches the wood, my motor pulley spins, but the gearbox doesnt move. What am ibdoing wrong?
nice welder , still crude where it was put together , is anything square , if taken a little more time , this might have made to last, only my opinion
Надо площадка, чтобы деревяху не затягивало.
I've split 5 cords through it so far. Does what I need it to. th-cam.com/users/postUgkxUyQswtttSffRMblGbrhCvZn7JkhtG1-7 I scrounge all my firewood and am not equipped to handle big wood, but for logs up to 24 inch diameter or so, it works great. I've been amazed by some of the gnarly bur oak and elm crotches it has split. For the tougher stuff within it's size range, you might have to study the piece a bit to decide the best attack, but if you split smart it's up to the job. It did arrive low on oil, and I was would have nicked it half a star for that, but it has regained my full confidence. UPDATE NOVEMBER 2021: Still going strong after all these years. I love the one-handed operation. Hope it's still in production if I ever need to replace it
З чого редуктор?
Всё нормално на привари на топор два упора в виде треуголника тогда ещё лутше калоть будет чюрку.
That’s awesome 👏 👍 it so much
Thanks a lot my bro 👍👍
Olá, quantos CV esse motor ?
put in there a lump I'm wondering how it splits?
Super odradjeno!
Hvala Puno brate 👍😉
Iz dakle si ti +??
Great work! Can you share the HP of the motor and the ratio of the gearbox?
Motor is 2,2kW and gear ratio of gearbox is 20:1. All mentioned in video
@@lojzofilipek5747 would you know about how much a gear box would cost?
Трудно найти большего камикадзе...
Атракцион " Лишние пальцы"!
What is gear ratio of gearbox
Dobra izvedba ali malo nevarna drugače dobro
You are very skilful, master. It would be an honor for you to work by your side. 👍👍👍👍👍👍
Thanks for Nice comment bro 👍😉
Продавате ли или не дровокол, и ако да каква е цената
Надо лист метала за колуном приворить, что-бы пень упирался
Ware are you from
Macedonia
Very Nice Job DK!!!
My opinion : rotate axe should be slower ...
Greath work man !!!
Thanks for Nice comment 👍👍
How to motor use HP
안전하고 실용적인 방법은 아니네요
도끼축이 아래에서 위로 올라와서 수평으로 움직이게 하고 나무를 눕혀서 올려놓으면 잘라지도록 하면 좋겠습니다.
25:49...а рабочий стол всё же нужен...такой как у всех хотя бы...
Za duże obroty a to skolei większe niebezpieczeństwo
good idea. it was incredible
Thanks for Nice comment
Такие палочки можно сразу в печь бросать
위험하고 효과적이지 않습니다
안전하고 효과적인 방법을 찿아보세요.
На уровне изобретения.
этому изобретению сто лет в обед...
🤣🤣🤣
Super 👍
Thank you 👍
Legna di salice e noce , e con la quercia??
Нельзя варить через подшипник.
На редуктор шкив нужен раза в два больше!
Nice stuff! What do you use as a cover for your camera while welding?
Thanks 👍I use Adobe premiere pro 😉
Were are you from?
@@MrDKDIY From Kuusamo, Finland. So, the effect was digital after all. Works for the viewers, it seems. Kudos!
Nice Finland 🇫🇮👍👍
Мужик (пересмотри видео) и сделай правильно !!!
Super👌👌👍👏👏👏
Super🔧🔧🔧😉😬😁
Giró muy rápido, tronco muy pequeño.
Nicee👏👏👌
Thank you! Cheers!
Nice
Thanks
Nice👏👍👌
Thanks 😊
Больше на щипачку подойдёт
Quanto custa rachador de lenha...?
шкив надо поставить больше на редуктор
Why not just use a chopper
Эл.включатель закрыть сзадней стороны.
Такие видеоролики надо запретить. Авторам назначить наказание вплоть до изоляции от общества.
Wow OTT.
عالی
Слишком большая скорость
used by the Azov battalions for frank discussions with Russian prisoners,
Coloca uma polia maior no redutor
Você é demais 👍
👍👍👍
Una macchina pericolosa, vorrei vedere con legna dura come la quercia, da evitare la riproduzione...