@@yrsued I just ordered my 6 inch model yesterday from grabagun. I kept checking sites constantly, until I got lucky and caught it when it became available. Cant wait to check it out!
So glad there are experts pointing out that new Python is an improvement over the original. I love both but even a novice like myself could see and feel the difference. Thanks for the video.
The sheer feel of the new Python and Anaconda is a definite indication of just how tight, sturdy, and well built these new revolvers are. I've invested in both, and am one happy bass playin', gun collectin', Muffugga!
Wow! The new Python is a gift to shooters, but even more impressive to me, was listening to Ken! What a smooth, clear teacher! My Lord he's good. And the banter, even if it might have been mildly scripted was excellent. Bravo, I want much more from the two of you!
For years I've dreamed of owning a Python. I'm so happy to see them being made again. There are so many great tips in this video that I can implement in my current revolver. Thank you so much !!!
Finally. A review I can't find a single fault with. Colt finally brought out the new blue version. It's not quite the old royal blue, but it's pretty close. The action is like butter. There are 9 double action Smith and Wesson revolvers in the safe. With the exception of the 3 safe queens, I've put spring kits and honed the actions in them. The new Colt came out of the box as slick and smooth as any of them. The trigger is a little heavier than I'm accustomed to, but I'm not going to change anything. It's hands down better than the old Python I had.
Thanks for watching and leaving a comment. I've owned the old Python, two of them and this new one that I tested and I have a Blued one coming up for a Video, the action on these new Pythons are FANTASTIC out of the box.
Mr. Hackathorn sold me on these when he said, the old triggers were crap. One of the only guys on TH-cam who doesn't pull punches with the old pythons. Once he said the action is better on the 2020, I'm really interested now.
@@yrsued Nah, I get it but they are greedy, selfish, and wrong ! This does not hurt the market at all it makes it better and more diverse adding more guns to it. Like Mr. Hackathorn says this new gun is a shooter, the old ones were handmade, new ones must be MiM mass produced. Internals are different like the New Cobra compared to old D frame guns. If I had a $10,000 appraised old Python I would never shoot the safe queen so I would buy one of the new improved versions to enjoy experiencing burning gunpowder in that type of sidearm.
@@tzuwarrior499 Ya, He can shoot fast and looks good on Camera, I want to be the Old Man in Texas that Delivered ONE Head Shot under Stress at 25+ Feet to stop a Massacre, THAT is who I wan to be!!
This was a great video and very educational. My first handgun about 45 years ago was a SW Model 15 (I am lucky enough to have never parted with it), over the years I have owned, shot and carried pistols but recently I bought a 4.25 Python and I have forgotten some of the basics that Ken covered. I will share this video with my wife before we head to the range with my new revolver. Thank you for a great video
That's one of the reasons I've never changed to the thumbs-forward grip. I shoot both revolvers and semiautos in about the same frequency and my "old" grip works just fine on both. I'm not going to learn a grip that *may* give me a little advantage with the semiautos but probably cause problems with the revolvers.
Wow! What a fantastic amount of information not only about this particular gun, but about all revolvers. Presented in clear understandable language. Thank you.
The python was definitely a work of art. Have never been able to convince myself to spend the hefty price for an original but will absolutely be buying a new one!
Yeah, I can’t wait. Have quite a few Smith and Wesson revolvers, both performance center and non performance center but I’ve wanted a python for many years. Most of what I’ve found that fit what I was looking for, seemed to be in the 2500-4500 range and would likely be a safe queen/collection piece. Never convinced myself to “pull the trigger” and now I’m glad I didn’t.
@@stephencushing8148 I've owned two Pythons, one a very old one I paid $375 for at a local Pawn Shop!! The new one was a Bright Stainless model in 4" that I picked up at a Pharmacy in Greenwich, CT, yup, Pharmacy.. I sold them both, but guess what, I still miss them both!! Now, with this new one, back to shooting the Python again and I mean REAL Shooting!! This new model was meant for shooting, not looking at!!
What an excellent and educational video. Ken is a national treasure. Makes me appreciate revolver shooting so much. Can't wait for my Anaconda to come in on order.
Great job on the video I love Ken's comments about S&Ws trigger, they just make great revolvers. But this Python looks like a show piece. Just beautiful.
Sonny Gunz - my 66-3 snub is my favorite, now I’ve been looking for and older 19 if I can’t find a decent one I’ll go for a new 19. Then I’ll look at the python 🐍
Yamil R. Sued -I know, i know, believe me I’m old school myself. “But” I got to handle the new 19 , the 4” one, and I have to say it is a great shooter. I’m in no rush , I am searching for a pinned and recessed 19 in good shape at a decent price
1980s, my older brother suggested we go by new pistols, as we we just old enough. Me, kind as poor gets a Ruger 6" revolver, brother gets Nickel 6" Python.... many great trips to desert for shooting. Little time passes, I get the Python, lots more trips for me (dirt bike). Python was there for 20+ years. We even called it Monte.... It is back home, and the new iteration is tempting. I would get 3" as maybe best all around length. Revolvers have qualities unique, and the rimed 38/357 is easy to reload. I like revolvers.
This is an excellent video in every respect! The presentation (and presenter) were very good, he introduced a top notch, highly respected interviewee and together they discussed and fired the latest generation of one of the most famous handguns ever made in the US! As if that wasn't enough, the videography and editing were superb as were the lighting and audio! I really enjoyed this episode and am very happy to have found your channel. Subscribed!
Thanks for watching and thanks for subscribing to us, we do the best we can and we're just Gun Guys trying to share what we love!! Please share as much as you can!!
Jericho 261 You are going to “discover” revolvers? Don’t even try to resist a good single action (Taylor, Cimarron, Ruger, Uberti). And start asking all the old folk you know . . . You have a K-38 Masterpiece?
This has to be your best review yet. Ken is is a great shooter and trainer . Again you have the best job ever . You not bad for a old geaser your self . Thanks
I used to live near Ken, and he took pity on a guy who loved guns but needed a lot of work. He treated me like an equal, even though I wasn’t worthy to carry his range bag. Great instructor, great guy. When the man talks guns, it behooves you to listen and retain.
That was an amazing video. Ken was incredibly knowledgeable and learned several things in such a short time. Is a beautiful looking revolver. Thx for sharing with us
Great vid. I’ve wanted one of these for so many years. My LGS said they’re getting their shipment in next week. Now the only question is 1) The 4.25 or 6 .....
Double action revolvers are some of the best ways to learn to shoot. You have to learn true trigger control through the pull and that makes all the difference in every other platform.
I bought a new Colt Python a few weeks ago, and it’s very nice. It had a few hundred rounds through it now, so…. The DA trigger is nice, but it’s a different action than a S&W L frame. The Python wants to be pulled all the way back, while the L frames sort of “snap’ at the halfway point. I honestly don’t know which I prefer. If you’re shooting bullseye at long distances, the Python’s SA break is clearly inferior to the Smith’s. The Python breaks in SA at 5lbs 5oz, while the L frame Smiths are around 3.5-4lbs. The Python shoots well at long distance, but that’s something that buyers might want to be aware of.
Two different guns and in all honesty hard to compare due to the different styles and ways of manufacturing. In the early 80's, when the 686 came out, I would have picked the 686, but nowadays, I don't like any S&W revolver since the early 2000's, I've had some, but they do need tons of MIM removed....
Ken Hackathorn is not only one hell of a great shooter he's one of the nicest people I've met in my life. He gave me some shooting tips at a tournament back in the early 80s and my technique improved greatly.
I'm still in the early stages of evaluating the new Pythons,but the more I learn,the more it sounds like the new ones are going to be really good. Stronger frame,better trigger,improved sights.I never thought I would have the chance to buy a Python but now it looks like I will be
I've got a 4" royal blue, from 1978 that is my, safe queen. I've never shot it. And I'm waiting to get my new 4" python that I bought online..It's gonna be my shooter !!! I've already bought a new, Wilson Combat rear sight for it,as the factory sight needs to be tightened down by a set screw. I've read where they vibrate loose and go out of aim.
A gun shop in Nashville a couple of months ago had a 1978, never fired, Royal Blued Python in the original box for $3,500. I don’t know if that was a fair price but I had to leave it there…
@@moreme40 Ya, that is a normal price for those. My buddy has a 1982 Nickel 6" on the box, fired like 20 rounds through it. I think that one will bring $4K. He won't sell it though!!
@@yrsued Yes, not knocking Ken at all. He's done great things at Gunsite. One of my LE instructors and fellow officers was a Gunsite instructor years ago. We had Gunsite training at each qualification. I was at a week long AR15 course at Gunsite and a LE instructor certified in Colo. Ken was on the range with us many times. Three of us got to stay in the instructors quarters and we met Col Cooper one evening at his home. A very memorable experience for me. Keep the great videos coming.
Great interview, very candid, and my favorite part, no buttkissing to Colt by Ken. Durability has always been an issue with the original Pythons, and Ken spoke to that. Well done.
Yamil, First, I wish to commend your humble approach to your video on the New 2020 Colt Python. You can call me at today I am around if you have time and interested. Appreciation to Ken for his tips for revolver, however he did double stage the DA during shooting. Your straight thru DA shooting was refreshing. Most Pythons were not out of time as anyone who understands the action knows that following thru with the trigger finger locks the cylinder tight against the bolt and in alignment with the barrel by design. Tinkers who installed trigger stops retarded the rotation of the trigger, whereby not allowing the hand to rotate the cylinder in alignment with the barrel as design intended. Any proper timed, alignment barrel/cylinder at hammer impact to firing pin will remain that way for thousands of rounds. I know , because I shot thousands of proof rounds in many guns properly timed and 10k's of rounds with only one adjustment to the original hand to my personal Python originally assembled in the early 70's. Unfortunately some of the guns assembled in the 90's and later were not properly assembled as designed. If both guns were on the table and I was able to check certain attributes, I would choose the old gun, just to demonstrate it could be blue printed to feel like or improved from the 2020 Python. When first hearing of the new Python to be and intro of previous OVER the last two years, I knew that the business plan from cost analysis, to product redesign, would likely incorporate proven CNC manufacturing processes. However, in order to retain the iconic design of the most exquisite revolver produced to date, certain physical characteristics MUST BE RETAINED. SUCH AS VENT RIBBED BARREL/WITH UNDERLUG, IDENTICAL GRIP/ FRAME APPEARANCE, ADJUSTABLE SITES, AND CHOICE OF BARREL LENGTHS. The addition of interchangeable sites with screw is not new, however, at the least ( although King Sights of California) should give credit to the late Dan B. Wesson. The retention of the leaf spring was an excellent call to potentially give the desired trigger response SA/DA I hope that the QA/QC demonstrates the potential winner quality of investment to longevity of performance. While I would test one to the limit, thousands of guns,shooting thousands of today's .357 defense loads should reveal design for manufacturing achievements and/or ferret out design or manufacturing faults. Actual execution of a design is one level. LONG TERM RELIABILITY IS YOUR REMEMBERED LEGACY. I REMAIN HOPEFUL FOR THE COLT FIREARMS EMPLOYEES TO RISE TO THE OCCASION AND REESTABLISH A MARQUE HELD IN THE HIGHEST ESTEEM BY THOSE WHO DEMANDED QUALITY. . Do not be so hasty to sell your old Python, all though there were thousands, no more will be made like the good ones. Check with Frank Glenn, He still knows how a Python is suppose to function. After he is done, it can last a lifetime with reasonable care. Remember if you drive your car or truck as fast it will go without proper maintenance, it's reliability is diminished severely. If you use reasonable care it will travel hundreds of thousands of miles. ( I drive Toyota's made in USA) An 8 or 10 " gun with appropriate scope mounts for hunting. Demand is always there for boutique runs of firearms. S&W , Ruger, Sig, CZ, and others have done likewise. Sincerely Jerry Moran aka Python Surgeon ( NA)
I'm hoping that the new Python hits a grand-slam. I've shot revolvers from S&W, Ruger, Colt, Korth, and Taurus.......The Colt Python is the one I've shot the best, although I don't own one. Hoping to buy one in the late summer or early autumn of this year. 👍👍👍
One of your most enjoyable videos EVER. Thank you for posting this. Im a revolver guy, more S&W than any other brand. I do have a few Colts, and fully intend to add the new 4.25 Python to the stable. 🤙🏻🤙🏻🤙🏻
Oh it's such a pleasure to hear Mr. Ken Hackathorn speak on guns and shooting technique - I think I am sold on the new Python and I'm a young guy who hates anything new...Wish he offered shooting course or even made shooting videos for sale..
There are thousands of videos like this,but this one is far at the top, due to realistic explanations and procedures during the shooting secions. The experience of 30 years or so, above all is visible.
@@thegunnut221 I answered you in another post, but here it goes again. According to Colt at SHOT: They received SIX Pytons back, which they paid for shipping on: 2@ Cosmetic Issues (I imagine the Crown or other blemish) 2@ Mechanical Issues (I assume Cylinders) 2@ They can't replicate the issue ( I imagine it's the Light Strikes, that "can" be ammo related). I know about ammo because I had the issue with "ONE" type of ammo on an older S&W revolver back in the 90's.
@@757optim I have a 19-5, I got it over 15 years ago, it was canibalized and had surface Rust, It was Unfired, Paid $20 for it!!! Sent it to the S&W Performance Center, Satin Blue Finish, AWESOME Revolver!!! Trigger is MIM, now, but with, who's counting.
Great video again. Always to nice to see Ken share his vast knowledge with such natural poise. Your production quality is greatly improved. Great job. Looking forward to the next video. Be well.
I paid $85 for my Colt Cobra in 1968 for off-duty carry & still have it. The only thing I changed was bobbing the hammer in the ‘70s for pocket carry during a short term undercover assignment.
About the 13:50 point, Ken points out the major weakness of revolvers. Unless you train to release the trigger FULLY between shots, you risk "tying the gun up" as he puts it, though a hard jam with broken internals is how I put it. This is why the old-timers relied on SA operation, even with DA revolvers.
I have a 4" in Nickel that I bought sub $2K a few years back. It was not an "investment" purchase, although it has been fun watching the apparent value rise. It has brought me great pleasure and I have no worries what the introduction of the 2020 Pythons will do to the perceived value as it will continue to bring a smile every time I hold it and shoot it. Thus, I will not rush to sell it off based on the appearance of the 2020's. I do look forward to owning a new 2020 Python. I also suspect, long term, if you wish to own an "original" you will pay the price.
S&W Model 27, a much more robust revolver with near comparable out-of-the-box action to the Python. Yes, the Python is a bit sexier but I believe my blued 3 inch M-27 is right in there with it.
I love Colts, but they're Cadillacs and S&W are like a reliable pickup. A friend was a Sheriff's deputy for almost 30 years and carried a stainless 686 for most of that. He switched to an H&K when the dept. went from 9mm to something heavier.
Yes, he is!! He is an encyclopedia of shooting knowledge and training!! Did you know he was one of the original instructors with Jeff Cooper at Gunsite??
I am SO GLAD to hear Ken Hackathorn say EXACTLY how the original Python action worked and felt! I've seen so many totally bogus posts over the years by people claiming to own Pythons, who blathered about how wonderful the action was when it totally sucked in DA mode! Just as Ken said, back in the hey-day of the revolver everybody fired them SA. DA was rarely used and this is WHY the high-end models all sported wide, spur hammers made for thumb-cocking. A great action was based on how the gun felt shooting it SA. Now, on SA the old Python had a great trigger and was highly accurate. Plus, Colt has the better operational design with the cylinder rotating "into" the frame, and the cylinder latch designed so that under recoil it is forced forward to maintain lock.
This new model is SO MUCH better in construction, materials and assembly, ya, NOT hand fitted, but you don't need to, you can precisely make parts that take hand fitting away from the equation!!!
I agree with Hackathorn..again Although I love the look of the Python, I always preferred the S&W Mod.19/66. However, this Python may just change my mind. Maybe.
I’m lucky enough to have an original 4” Python. It was given to me new by my father. All the cylinder and holster ware is my doing. It’s a wonderful thing! One of these new Pythons will be mine. I don’t expect the same level of fit and finish, but if it shoots as well as these gentleman state, I will continue the tradition of passing a brand new Python to my sons.
I'd prefer a Royal Blue carbon steel version too. I have a 1970s vintage blue one, it's a safe queen now. I have a Wiley Capp Colt SAA .44 Special they made a few years ago, the bluing is beautiful, Colt still knows how to blue guns.
I love how this is two minutes of talking about a product and 15 minutes of absolute knowledge bombs. Ken Hackathorn is truly a national treasure.
Well, Ken has been an instructor for almost 50 years, that's why.
I never thought I would live long enough to see Colt build another Python
Well, you did and it's a Great New Year!!! I hope you have one too!!!
well when your going into your 6th bankrupt its time to sell something some one wants
@@katana258 Colt's biggest problems are the Unions and the State of CT, both enemies!!!
@@yrsued I just ordered my 6 inch model yesterday from grabagun. I kept checking sites constantly, until I got lucky and caught it when it became available. Cant wait to check it out!
@@MarcoFromTropoja If you don't mind, please share the price!!
I could literally listen to ken talk for days. This man is legitimately an encyclopedia and a history book of shooting and firearms.
So glad there are experts pointing out that new Python is an improvement over the original. I love both but even a novice like myself could see and feel the difference. Thanks for the video.
There are MANY differences, the new ones, IMHO are MUCH better shooters!!
The sheer feel of the new Python and Anaconda is a definite indication of just how tight, sturdy, and well built these new revolvers are. I've invested in both, and am one happy bass playin', gun collectin', Muffugga!
How lucky is this guy, training with ken and shooting the new colt . Sounds like a great day!
IT was a Fantastic Day!! Any Day at the Range is a GREAT Day!!
Wow! The new Python is a gift to shooters, but even more impressive to me, was listening to Ken! What a smooth, clear teacher! My Lord he's good. And the banter, even if it might have been mildly scripted was excellent. Bravo, I want much more from the two of you!
Nothing scripted, we just had a great time chatting and getting some information out!!
@@yrsued Well done!
@@EdAb Thanks!!
@Alexander - I think Ken is right. A new, better Python for less than half the price has got to hurt the price of the old guns.
For years I've dreamed of owning a Python. I'm so happy to see them being made again.
There are so many great tips in this video that I can implement in my current revolver. Thank you so much !!!
Ken was one of the Original Gunsite Instructors for a VERY good reason!!
Finally. A review I can't find a single fault with. Colt finally brought out the new blue version. It's not quite the old royal blue, but it's pretty close. The action is like butter. There are 9 double action Smith and Wesson revolvers in the safe. With the exception of the 3 safe queens, I've put spring kits and honed the actions in them. The new Colt came out of the box as slick and smooth as any of them. The trigger is a little heavier than I'm accustomed to, but I'm not going to change anything. It's hands down better than the old Python I had.
Thanks for watching and leaving a comment. I've owned the old Python, two of them and this new one that I tested and I have a Blued one coming up for a Video, the action on these new Pythons are FANTASTIC out of the box.
Glad to see the python back. Sounds like colt did their homework.
They did, and they are selling fast!! Dealers have them and others can order them now!!
now waiting for the 8" variant
can't buy one in my country, but a man can dream...
@@GeorgeTsiros It might be out later, I don't know depends on sales!!
Yamil R. Sued should be good. They’re out of stock everywhere.
@@laddjm Be patient and buy smart, you should be able to buy under MSRP very soon!!
Mr. Hackathorn sold me on these when he said, the old triggers were crap. One of the only guys on TH-cam who doesn't pull punches with the old pythons. Once he said the action is better on the 2020, I'm really interested now.
It is MUCH better and has MUCH more durability!!
New guns use a different mainspring for improvement. Any Colt is still a "Colt" (cult).
@@richardkluesek4301 Collectors are all Butt Hurt about it!! They ALL hate it!!
@@yrsued Nah, I get it but they are greedy, selfish, and wrong ! This does not hurt the market at all it makes it better and more diverse adding more guns to it. Like Mr. Hackathorn says this new gun is a shooter, the old ones were handmade, new ones must be MiM mass produced. Internals are different like the New Cobra compared to old D frame guns. If I had a $10,000 appraised old Python I would never shoot the safe queen so I would buy one of the new improved versions to enjoy experiencing burning gunpowder in that type of sidearm.
@@richardkluesek4301 Very well said!! I don't buy guns to look at them, I want to make empty brass with them!!
I don’t want to be John Wick.
I want to be Jerry Miculek
Me too!!
I dont want to be john wick
I want to be Taran Butler.
Wait didn't he train john wick
@@tzuwarrior499 Ya, He can shoot fast and looks good on Camera, I want to be the Old Man in Texas that Delivered ONE Head Shot under Stress at 25+ Feet to stop a Massacre, THAT is who I wan to be!!
Col. C. Askins
@@yrsued good for you
This was a great video and very educational. My first handgun about 45 years ago was a SW Model 15 (I am lucky enough to have never parted with it), over the years I have owned, shot and carried pistols but recently I bought a 4.25 Python and I have forgotten some of the basics that Ken covered. I will share this video with my wife before we head to the range with my new revolver. Thank you for a great video
Thanks for watching, I'm glad the video was helpful. Have fun with your new revolver!!
Watching the thumbs forward grip being used on revolvers is making me anxious.
I know, wasn't as bad as when I shot the Chiappa Rhino in .357, THAT hurt!!
Hard habit to break.
@@foxtrotgolf5698 Yes, tell me about it!! I try, but I can't!!
That's one of the reasons I've never changed to the thumbs-forward grip. I shoot both revolvers and semiautos in about the same frequency and my "old" grip works just fine on both. I'm not going to learn a grip that *may* give me a little advantage with the semiautos but probably cause problems with the revolvers.
@@itsapittie I'm NOT changing either, that is the way I shoot and it's hard for me to change too.
Wow! What a fantastic amount of information not only about this particular gun, but about all revolvers. Presented in clear understandable language. Thank you.
Thanks for watching, Ken Hackathorn is a superb teacher and a GREAT source of information.
The python was definitely a work of art. Have never been able to convince myself to spend the hefty price for an original but will absolutely be buying a new one!
This new version, not only will it less expensive, but it will be a better shooter, the old Python is a great collector Piece, but NOT a shooter!!
Yeah, I can’t wait. Have quite a few Smith and Wesson revolvers, both performance center and non performance center but I’ve wanted a python for many years. Most of what I’ve found that fit what I was looking for, seemed to be in the 2500-4500 range and would likely be a safe queen/collection piece. Never convinced myself to “pull the trigger” and now I’m glad I didn’t.
@@stephencushing8148 I've owned two Pythons, one a very old one I paid $375 for at a local Pawn Shop!! The new one was a Bright Stainless model in 4" that I picked up at a Pharmacy in Greenwich, CT, yup, Pharmacy.. I sold them both, but guess what, I still miss them both!! Now, with this new one, back to shooting the Python again and I mean REAL Shooting!! This new model was meant for shooting, not looking at!!
@@yrsued Not sure that’s the case , my old man had one in the 70’s and shot thousands of rounds without a problem.
@@alphasmurf6563 One what in the 70's?? A Python??
What an excellent and educational video. Ken is a national treasure. Makes me appreciate revolver shooting so much. Can't wait for my Anaconda to come in on order.
Ya, Ken is great with a revolver. Did you see our Video with the Anaconda?
@@yrsued No Sir. But I'm gonna remedy that right now! Thank you!
@@mattygunn3852 I think the Anaconda is a superb revolver, I had an OG in the 90's, but sold it, I regret that. I love the new one, very accurate!!
@@yrsued Thanks so much for the feedback! I am very excited. Hope my LGC gets one in soon!
@@mattygunn3852 I have seen them available for under MSRP and I have seen them Blem for a very low price.
Always a treat to see Hackathorn. Very knowledgeable.
He is da man!!
Great job on the video I love Ken's comments about S&Ws trigger, they just make great revolvers. But this Python looks like a show piece. Just beautiful.
It is both a show piece and a shooter!!
I’m a S&W guy too (& a huge snubby nerd) but I’m extremely happy to see the python back. I’ll buy a snub nose when they’re available.
Ya, I remember those!! I bet they will eventually come up with one!!
@Cripple guy You should see my late 60's early 70's Cobra!!
Sonny Gunz - my 66-3 snub is my favorite, now I’ve been looking for and older 19 if I can’t find a decent one I’ll go for a new 19.
Then I’ll look at the python 🐍
@@vincentj3093 Personally, I don't like ANY of the new S&W's!!
Yamil R. Sued -I know, i know, believe me I’m old school myself. “But” I got to handle the new 19 , the 4” one, and I have to say it is a great shooter. I’m in no rush , I am searching for a pinned and recessed 19 in good shape at a decent price
1980s, my older brother suggested we go by new pistols, as we we just old enough. Me, kind as poor gets a Ruger 6" revolver, brother gets Nickel 6" Python.... many great trips to desert for shooting. Little time passes, I get the Python, lots more trips for me (dirt bike). Python was there for 20+ years. We even called it Monte.... It is back home, and the new iteration is tempting. I would get 3" as maybe best all around length. Revolvers have qualities unique, and the rimed 38/357 is easy to reload. I like revolvers.
I loved the 4.25" Python, my favorite!! But there are models for every taste!!
Very interesting guys. Thanks for posting the video. Much Appreciated.
Beretta Sr.
My pleasure doing it!!
Beretta, you know how to put out a good video, too!
I JUST got my brand new Colt Python 4.25" and I`m just ecstatic. LOVE this video.
THnks for watching, you will love the Python!
This is an excellent video in every respect!
The presentation (and presenter) were very good, he introduced a top notch, highly respected interviewee and together they discussed and fired the latest generation of one of the most famous handguns ever made in the US!
As if that wasn't enough, the videography and editing were superb as were the lighting and audio!
I really enjoyed this episode and am very happy to have found your channel. Subscribed!
Thanks for watching and thanks for subscribing to us, we do the best we can and we're just Gun Guys trying to share what we love!! Please share as much as you can!!
I’ve never seen so much enthusiasm for a revolver !! As a Glock guy, I can’t wait to buy one. Just got to save some money now.
The only thing I would recommend is to shop smart, shop around and you will find a great price!!
Jericho 261 You are going to “discover” revolvers? Don’t even try to resist a good single action (Taylor, Cimarron, Ruger, Uberti). And start asking all the old folk you know . . . You have a K-38 Masterpiece?
@@bho-lj1jk I love revolvers, I don't shoot them well, but I still love them!!
Thank God the Colt Pythons are back in production
I believe this is a great revolver!!
Ken Hackathorn: talks the talk and walks the walk...a true Authority in his field and his words are worth heeding. That new Colt looks fantastic!!
That is why we called him a Living Legend
That's why I bought the 3" and the 4.25"
Time to start saving my pennies! I can't wait to get this gun.
You should, it is a GREAT Shooter!!
@Johnny Dominguez I wouldn't pay Retail!! Who does?? They started selling on January 1st at $1300!!
@Johnny Dominguez Ya, I know, a Gunsite Class was $300 back in 1979, now it's over $1700, so ya, it sucks!!
@Johnny Dominguez Save your pennies and you will might get that Blued one!!
I would wait a little while. I have heard it has some issues. Colt seems to have some bugs that need to be worked out.
I could listen to this guy all day
This has to be your best review yet. Ken is is a great shooter and trainer . Again you have the best job ever . You not bad for a old geaser your self . Thanks
Remind me in the mornings, I make Rice Crispies noises with my knees ;). BTW, Ken is a superb instructor!!
I have an 8" and a 6" of the originals. You guys have convinced me to run out and get a new 4 incher. Thanks.
It is a superb addition to any Gun Collection!!
I will have one. The trigger on the new Cobra is amazing. I have no doubt the new Python will not disappoint.
take my word for it, it is GREAT!!
I used to live near Ken, and he took pity on a guy who loved guns but needed a lot of work. He treated me like an equal, even though I wasn’t worthy to carry his range bag. Great instructor, great guy. When the man talks guns, it behooves you to listen and retain.
LOL, I know how you feel, he treats me like an equal and I'm NOT EVEN CLOSE to his level of experience. I enjoy my time hanging with him!!
Im so happy the python is back
You are I'm good company then!!
Great tips. I’m new to the revolvers.
Ken IS a great source of info on anything shooting...
That was an amazing video. Ken was incredibly knowledgeable and learned several things in such a short time. Is a beautiful looking revolver. Thx for sharing with us
My pleasure, Ken DOES know his stuff!!
Great vid. I’ve wanted one of these for so many years. My LGS said they’re getting their shipment in next week. Now the only question is 1) The 4.25 or 6 .....
Thanks for watching, personally, I will go with the 4.25" for my purposes, but it's up to you and your needs!! Get both, make it easy on you!!
Definitely going with the 4 1/4
@@garypollard9770 That is the one I want too!!
Double action revolvers are some of the best ways to learn to shoot. You have to learn true trigger control through the pull and that makes all the difference in every other platform.
Yes and it shows your bad habits!! This is the best way to learn!!
Yamil R. Sued yes! You can leave chambers empty and what not. It’s the best.
@@izuksammy Funny, that is how I learned!!
Nope 1911 is where its at u idiot
Gsfbffx Pdhhdf sounds good :)
I learn so much from ken hackathon great teacher thank u 🙏 for this video I learned a lot from him
Ken is a GREAT source of Information!!
@@yrsued u just brought Me 357 Python 🐍 4inch this my first revolver I learned so much video
@@litochicago6058 I think that is the best choice!! Back in the 80's, I would have chosen the 6", now, the 4" is my choice!!
@@yrsued I have the 4 inches barrel
@@litochicago6058 The best choice of the three made now!!
I bought a new Colt Python a few weeks ago, and it’s very nice. It had a few hundred rounds through it now, so…. The DA trigger is nice, but it’s a different action than a S&W L frame. The Python wants to be pulled all the way back, while the L frames sort of “snap’ at the halfway point. I honestly don’t know which I prefer. If you’re shooting bullseye at long distances, the Python’s SA break is clearly inferior to the Smith’s. The Python breaks in SA at 5lbs 5oz, while the L frame Smiths are around 3.5-4lbs. The Python shoots well at long distance, but that’s something that buyers might want to be aware of.
Two different guns and in all honesty hard to compare due to the different styles and ways of manufacturing.
In the early 80's, when the 686 came out, I would have picked the 686, but nowadays, I don't like any S&W revolver since the early 2000's, I've had some, but they do need tons of MIM removed....
Ken Hackathorn is not only one hell of a great shooter he's one of the nicest people I've met in my life. He gave me some shooting tips at a tournament back in the early 80s and my technique improved greatly.
Ken is a great person, good friend and better trainer!!
“You shootem right they quit doing what their doing” Ken Hackathorn
Words of wisdom!!
John cirrelo real badass
@@W1ldt1m You mean Jim Cirillo, from the NYPD Stake Out Squad??
Could listen to Ken all day, love it
I'm still in the early stages of evaluating the new Pythons,but the more I learn,the more it sounds like the new ones are going to be really good. Stronger frame,better trigger,improved sights.I never thought I would have the chance to buy a Python but now it looks like I will be
For the money you would spend on one of the Originals, you can get both of these!!
I've got a 4" royal blue, from 1978 that is my, safe queen. I've never shot it. And I'm waiting to get my new 4" python that I bought online..It's gonna be my shooter !!! I've already bought a new, Wilson Combat rear sight for it,as the factory sight needs to be tightened down by a set screw. I've read where they vibrate loose and go out of aim.
Funny you mention those Wilson Sights, Video coming up with Marty!!
A gun shop in Nashville a couple of months ago had a 1978, never fired, Royal Blued Python in the original box for $3,500. I don’t know if that was a fair price but I had to leave it there…
@@moreme40 Ya, that is a normal price for those. My buddy has a 1982 Nickel 6" on the box, fired like 20 rounds through it. I think that one will bring $4K. He won't sell it though!!
@@yrsued, I’d hold onto that one too
@@moreme40 Yes, he won't sell it!!
Great video! We are only old on the outside. Still young at heart!🇺🇸
Nope, we're old!!
So glad to see Colt came to their senses; I think they'll see very soon it was a good move.
Great news, Hope they continue in this trend!!
really good to see old school guy' s holding up to values long forgotten, as everybody wants to go tactical and spray and prey.
Gee, thanks for calling us old ;)
...old, but not obsolete...
@@theochrist9453 That makes me feel better!!
A review of a handgun and Ken gives the fellow a shooting lesson! What a class act. As for the Colt in question, yeah I want one.!
George Semel I don’t blame you, great revolver
I'm glad the Python is back! Can't wait to try it out!
You will love it!!
The real master was Col Jeff Cooper. I met Ken and he is a nice guy and very good with a gun.
You know Ken was one of Jeff's first instructors when Gunsite Started as API in 1976...
@@yrsued Yes, not knocking Ken at all. He's done great things at Gunsite. One of my LE instructors and fellow officers was a Gunsite instructor years ago. We had Gunsite training at each qualification. I was at a week long AR15 course at Gunsite and a LE instructor certified in Colo. Ken was on the range with us many times. Three of us got to stay in the instructors quarters and we met Col Cooper one evening at his home. A very memorable experience for me. Keep the great videos coming.
@@45oneshoystop Man, you're lucky, I only met Jeff at SHOT, but I celebrated my 56th Birthday at the Sconce with Janelle and her two daughters!!
Great interview, very candid, and my favorite part, no buttkissing to Colt by Ken. Durability has always been an issue with the original Pythons, and Ken spoke to that. Well done.
But some out there still claim this is NOT true!!
Yamil,
First, I wish to commend your humble approach to your video on the New 2020 Colt Python.
You can call me at today I am around if you have time and interested.
Appreciation to Ken for his tips for revolver, however he did double stage the DA during shooting.
Your straight thru DA shooting was refreshing. Most Pythons were not out of time as anyone who understands the action knows that following thru with the trigger finger locks the cylinder tight against the bolt and in alignment with the barrel by design. Tinkers who installed trigger stops retarded the rotation of the trigger, whereby not allowing the hand to rotate the cylinder in alignment with the barrel as design intended. Any proper timed, alignment barrel/cylinder at hammer impact to firing pin will remain that way for thousands of rounds. I know , because I shot thousands of proof rounds in many guns properly timed and 10k's of rounds with only one adjustment to the original hand to my personal
Python originally assembled in the early 70's. Unfortunately some of the guns assembled in the 90's and later were not properly assembled as designed.
If both guns were on the table and I was able to check certain attributes, I would choose the old gun, just to demonstrate it could be blue printed to feel like or improved from the 2020 Python.
When first hearing of the new Python to be and intro of previous OVER the last two years, I knew that
the business plan from cost analysis, to product redesign, would likely incorporate proven CNC manufacturing processes. However, in order to retain the iconic design of the most exquisite revolver
produced to date, certain physical characteristics MUST BE RETAINED. SUCH AS VENT RIBBED BARREL/WITH UNDERLUG, IDENTICAL GRIP/ FRAME APPEARANCE, ADJUSTABLE SITES, AND CHOICE OF BARREL LENGTHS. The addition of interchangeable sites with screw is not new, however,
at the least ( although King Sights of California) should give credit to the late Dan B. Wesson. The retention of the leaf spring was an excellent call to potentially give the desired trigger response SA/DA
I hope that the QA/QC demonstrates the potential winner quality of investment to longevity of performance. While I would test one to the limit, thousands of guns,shooting thousands of today's .357 defense loads should reveal design for manufacturing achievements and/or ferret out design or manufacturing faults. Actual execution of a design is one level. LONG TERM RELIABILITY IS YOUR REMEMBERED LEGACY. I REMAIN HOPEFUL FOR THE COLT FIREARMS EMPLOYEES TO RISE TO THE OCCASION AND REESTABLISH A MARQUE HELD IN THE HIGHEST ESTEEM BY THOSE WHO DEMANDED QUALITY.
. Do not be so hasty to sell your old Python, all though there were thousands, no more will be made like the good ones. Check with Frank Glenn, He still knows how a Python is suppose to function. After he is done, it can last a lifetime with reasonable care. Remember if you drive your car or truck as fast it will go without proper maintenance, it's reliability is diminished severely. If you use reasonable care it will travel hundreds of thousands of miles. ( I drive Toyota's made in USA)
An 8 or 10 " gun with appropriate scope mounts for hunting. Demand is always there for
boutique runs of firearms. S&W , Ruger, Sig, CZ, and others have done likewise.
Sincerely Jerry Moran aka Python Surgeon ( NA)
WOW, THAT is a history lesson there!!! YOU ARE a true master of your craft!!
I'm hoping that the new Python hits a grand-slam. I've shot revolvers from S&W, Ruger, Colt, Korth, and Taurus.......The Colt Python is the one I've shot the best, although I don't own one. Hoping to buy one in the late summer or early autumn of this year. 👍👍👍
@@josephruiz7233 And by then, priced should be down a bit, with the first adopters paying higher prices!!
One of your most enjoyable videos EVER. Thank you for posting this. Im a revolver guy, more S&W than any other brand. I do have a few Colts, and fully intend to add the new 4.25 Python to the stable. 🤙🏻🤙🏻🤙🏻
Me too, I have one on order!!
Thank you! Great information.
My pleasure, thanks for watching!!
I had a 6" stainless and 2 4" blued Pythons...all smoooooth as silk =)
And when you pick this one up, you will like it even more!!
Oh it's such a pleasure to hear Mr. Ken Hackathorn speak on guns and shooting technique - I think I am sold on the new Python and I'm a young guy who hates anything new...Wish he offered shooting course or even made shooting videos for sale..
Ken knows his subject matter!!
Wow. So awesome. SO much great info in 18 minutes.
Thanks, Glad you liked it
There are thousands of videos like this,but this one is far at the top, due to realistic explanations and procedures during the shooting secions.
The experience of 30 years or so, above all is visible.
Gee thanks, you just called me and Ken old ;). OK, yes, we are old ;)
They did this one right. Good going, Colt.
I must agree, they really did it right!!
Did they? You havnt heard about the issues with the cylinder and poorly machined crowns?
@@thegunnut221 I answered you in another post, but here it goes again.
According to Colt at SHOT:
They received SIX Pytons back, which they paid for shipping on:
2@ Cosmetic Issues (I imagine the Crown or other blemish)
2@ Mechanical Issues (I assume Cylinders)
2@ They can't replicate the issue ( I imagine it's the Light Strikes, that "can" be ammo related). I know about ammo because I had the issue with "ONE" type of ammo on an older S&W revolver back in the 90's.
I bought my Python in 1986. 6in blued. brand new with 500 rounds of 357 and four speed loaders for $800. still my favorite pistol to shoot.
Is it holding Timing OK?
@@yrsued yea it is working just fine. had to have it "tuned up" about a decade ago but otherwise it is fine.
@@abntemplar82 Oh, OK, I have found that a steady diet of Double Action .357's will throw them out of timing!!
I've been dreaming of this gun since I first saw one 40 years ago.
Now you can get a better one without a mortgage!!
Totally agree wanted one since I was 18 I’m 51 now
@@phillipj40 You should get one, don't pay more than $1350 though, be patient!!
I am definitely buying one this year in 2020. Great trigger pull at 4:31.
It is MUCH better than the Original!!!
I have an 80's model 6" blue and it always had timing issues I sold it for $400 mint good riddence
Timing issues were very common on these!!
Just picked mine up as Christmas present to myself ❤
You will love it and you deserve it!!
Wonderful news! And awesome media job, Yamil!
Thanks Brother, I need to call you soon!!
You do good work, Yamil.
It is a beauty. Men's jewelry. The Rolex of guns.
If you like this one, you should see the new Blued one
Tell me more! Have you got one?@@yrsued
I'm definitely going to buy one of these. Whether it's 1911s or revolvers, Colt has always made beautiful handguns. 👍🇺🇸
It's the way to go!!
I'd be happy with a Model 19 or 27 without the hole. : )
@@757optim I have a 19-5, I got it over 15 years ago, it was canibalized and had surface Rust, It was Unfired, Paid $20 for it!!! Sent it to the S&W Performance Center, Satin Blue Finish, AWESOME Revolver!!! Trigger is MIM, now, but with, who's counting.
Man, props to Colt. They did the Python justice with the new model, it really is just like the old ones.
Bilbo_Gamers And IMHO, made better than the old ones.
Perfect. I need One !
Thanks Ken for perfect video.
Ken IS a Living Legend!!
Thank you Ken for bring your knowledge to the table. You reinforced my decision on the Python... this will be my first revolver.
Thanks for watching!!! Ken is the master of the wheel gun!!
@@yrsued he is... I watch alot with him. His knowledge of 1911s is quite extensive. I have been considering a trip up from Pima County.
@@Monster11B Well, Gunsite is a place you should look at!! I live in Maricopa County, but do a lot up at Gunsite!!
@@yrsued I see that. Just discovered your channel today. You rock on.
@@Monster11B Thanks, please subscribe and share to all you like minded friends!! I want to make this video rock!!
I also bought my Python at a pawn shop in Globe Arizona.
There's many of them out there!! MCSO had them for a while!!
A lot of accurate information from a true professional. Thsnk you.
Thanks for watching and taking time to leave a comment!!
This is a good video. I stopped focusing on the gun and became captive to Mr. Hackathorn’s instructions at about the 10 minute mark...😁
Ken is a great instructor!!
Great video again. Always to nice to see Ken share his vast knowledge with such natural poise. Your production quality is greatly improved. Great job. Looking forward to the next video. Be well.
Thanks for watching!!
Been waiting for this for a long time, great video and yeah I'm most certainly buying one!
They are selling online like Hot Cakes!! They are retailing for around $1300 now!!
Learned so much just now, thanks ken
There is tons to be learned from Ken!!
Very good video excellent information !! without a doubt the number one! Happy year Yamil!
Thanks and Happy New Year to you too!!
Absolutely right about the trigger.
It is a great trigger!!
...would love to see the this new one in the traditional Colt deep blue...
I would too, but if you think there is ButtHurt now, wait till the price goes up $700 for the Bluing!!
@@yrsued Thank God (in that case) for Dura Blue...
@@mohammedcohen I think it will happen, but not now, they are trying one product at a time and they are doing very well!!
Just Buy Mine For 6K!!!!!!!!!!!!!!!!!!!!!!
I paid $85 for my Colt Cobra in 1968 for off-duty carry & still have it. The only thing I changed was bobbing the hammer in the ‘70s for pocket carry during a short term undercover assignment.
I still have my Dad's 1969 Cobra, is a bit worn out, but a very nice revolver!!
This review was excellent and extremely informative. I will be in the waiting line. 4.5 for me.
Thanks and funny you mention it, I will be getting that one too!!
I find it hard to believe that product design is driven by places like Kalifornia or Canada. smh.
About the 13:50 point, Ken points out the major weakness of revolvers. Unless you train to release the trigger FULLY between shots, you risk "tying the gun up" as he puts it, though a hard jam with broken internals is how I put it. This is why the old-timers relied on SA operation, even with DA revolvers.
Ya, Shooting Revolvers is an art!! Not hard to learn, but it is an art!!
Excellent info on the new Python.
Thanks for watching!!
I have a 4" in Nickel that I bought sub $2K a few years back. It was not an "investment" purchase, although it has been fun watching the apparent value rise. It has brought me great pleasure and I have no worries what the introduction of the 2020 Pythons will do to the perceived value as it will continue to bring a smile every time I hold it and shoot it. Thus, I will not rush to sell it off based on the appearance of the 2020's. I do look forward to owning a new 2020 Python. I also suspect, long term, if you wish to own an "original" you will pay the price.
S&W Model 27, a much more robust revolver with near comparable out-of-the-box action to the Python. Yes, the Python is a bit sexier but I believe my blued 3 inch M-27 is right in there with it.
The M27 was a classic and it will NEVER be built the same way again regretfully enough
I own a sw 27 3.5 inch. Beautiful gun. It's a safe queen. Wish they came out with this again minus the lock.
I love Colts, but they're Cadillacs and S&W are like a reliable pickup. A friend was a Sheriff's deputy for almost 30 years and carried a stainless 686 for most of that. He switched to an H&K when the dept. went from 9mm to something heavier.
Awesome video, very straight forward and informative. Ken is a LEGEND!!!
Yes, he is!! He is an encyclopedia of shooting knowledge and training!! Did you know he was one of the original instructors with Jeff Cooper at Gunsite??
I did not but I'm just a 47 year old young pup whose got a lot of learning ahead of me ;-)
If it’s good enough for Ken it’s good enough for me
It is VERY good!!
I am SO GLAD to hear Ken Hackathorn say EXACTLY how the original Python action worked and felt! I've seen so many totally bogus posts over the years by people claiming to own Pythons, who blathered about how wonderful the action was when it totally sucked in DA mode! Just as Ken said, back in the hey-day of the revolver everybody fired them SA. DA was rarely used and this is WHY the high-end models all sported wide, spur hammers made for thumb-cocking. A great action was based on how the gun felt shooting it SA. Now, on SA the old Python had a great trigger and was highly accurate. Plus, Colt has the better operational design with the cylinder rotating "into" the frame, and the cylinder latch designed so that under recoil it is forced forward to maintain lock.
This new model is SO MUCH better in construction, materials and assembly, ya, NOT hand fitted, but you don't need to, you can precisely make parts that take hand fitting away from the equation!!!
Thank you for the training. I am gonna practice.... with my 586.👍
I am S&W guy too.
Id buy a Colt if the price is reasonable.
I prefer older S&W's, but NOT the new ones
Ken Hackathorn is a wisdom kind of a guy when it comes to shooting. I listen carefully.
Ken DOES know his material well!!
Ha! I thought the barrel looked longer than 4"! Thanks for showing me I'm not hallucinating.
Yup. 4.25"
Currently in the process of applying for my LTC. Lot of great info from Ken on revolvers here. Earned a sub for this.
Such a nice wheelgun.
Yes indeed!!
I love the new Colts! Thanks for the video
Thanks for watching!! I love them too!!
Ken’s GMT Batman goes nice with that Python.
LOL!!!
The video started as a publicity for the new Python 2020 and ending as a class of using a revolver. I like that.
We want to show you the gear we like, but we also like to show you how to properly use it!! Shooting a Revolver is a Lost Art!!
@@yrsued Thanks for answer, and Thanks for made a great video (forgive my bad English)
@@Anibal677 Don't worry, English is my second Language too!!
I agree with Hackathorn..again Although I love the look of the Python, I always preferred the S&W Mod.19/66. However, this Python may just change my mind. Maybe.
This new Python beats ANY modern 19/66
@westbender 820 Nope, No Lock or Hole and no MIM Hammer and Trigger either!!
Don't do it!! Half the gun of the S&W 686 at over twice the price!! Already having problems with the new Colt junk!!👎👎🖕🖕
@@glockfanboy4927 So, you're saying that a MIM Hammer, MIM Firing Pin and MIM Trigger are better, right??
@@yrsued No MIM Iin 586/686 through -6 models. Wayyyyy better quality then this modern crap
I’m lucky enough to have an original 4” Python. It was given to me new by my father. All the cylinder and holster ware is my doing. It’s a wonderful thing!
One of these new Pythons will be mine. I don’t expect the same level of fit and finish, but if it shoots as well as these gentleman state, I will continue the tradition of passing a brand new Python to my sons.
You will be surprised by the accuracy and reliability!!
It'd be great if they would consider a carbon steel "Royal Blued" model in the future if their gamble pays off.
Maybe very soon!!
I'd prefer a Royal Blue carbon steel version too. I have a 1970s vintage blue one, it's a safe queen now. I have a Wiley Capp Colt SAA .44 Special they made a few years ago, the bluing is beautiful, Colt still knows how to blue guns.
@@isaacarnold4635 They DO know how to Blue, I just don't know if it would be cost effective to do so!!
@@yrsued I hope they do blue, otherwise I'm a pass. Stainless guns look "cheap" to me. I've never liked them.
@@thebronzetoo YOu're just looking for excuses!! Colt makes guns due to sales and I gather that stainless guns sell more!!