Eco Solutions X-Tex Artex Remover - Instructions and Demonstration

For more information please visit www.ecosolutio...
This video has step-by-step instructions and also demonstrates how to remove artex and textured coatings from walls or ceilings using Eco Solutions X-Tex.
Researched, developed and manufactured in the UK. X-Tex® allows the removal of textured coatings such as *Artex® without causing dust from harmful asbestos fibres. Formulated by Eco Solutions from the most advanced, innovative water-based technology using ” science not solvents”.
Some plaster-type textured coatings (mainly sold before the mid-1980’s) may contain harmful asbestos fibres, Minimal VOC content (0.000004%, as certified by independent laboratory detection test).
*registered Trade Mark of BPB UK Ltd.
Directions for Use
Using X-Tex by Eco Solutions is one of the quickest, easiest and safest ways to remove Artex®. Simply paint over the artex® walls and ceilings then scrape off when softened. This process is called a working wet system and means that the artex® is kept wet at all times. This results in no asbestos fibres becoming airborne and eliminates the risk of breathing in hazardous microfibres which can lead to Asbestosis.
After applying X-Tex and scraping back the surfaces, piece will fall directly to the floor. For this reason, we recommend covering your entire floor with old newspapers or other disposable floor coverings. Once done, just wrap the floor covering and artex® into a bag and dispose of at your local council recycling centre. Most refuse sites now take asbestos waste.
Most artex® has been painted over the years with various coats of emulsions and this does need to be removed before you can start removing the artex®. The most difficult of these is vinyl silk which contains plastic polymers, and once softened by any type of paint remover can turn it into a gooey mess!
Vinyl silk is hard to penetrate with any type of paint remover, so the first recommendation is to apply a light coat of X-Tex then lightly scoring the surface with a blade. We then recommend applying another layer of X-Tex which will work into the score marks and help remove the paint from behind.
Removal is made easier with a long-handled blade scraper which helps to lift it from the surface rather than spreading it around the wall, which usually happens when using a standard steel scraper.
Another great tip is to apply X-Tex and cover with foil or plastic film and leave overnight. The foil prevents the X-Tex® from drying out and also forces the product down and in most cases softens both the emulsion and the artex® in one application. This is highly recommended to obtain the best results and to save you product.
Size Availability
Available in 2.5 litre, 5 litre and 15 litre tubs.
Typical Performance
Textured Coatings such as Artex® takes only 15-30 minutes - Textured Coatings plus 1-2 layers paint up to 1 hour - Multi-layered paint over textured coatings 1 hour to overnight.
To find you nearest stockist:
UK & Ireland www.ecosolutio...
Trade Customers UK & Ireland www.ecosolutio...
Mail Order www.ecosolutio...
International Stockists www.ecosolutio...
This video: • Eco Solutions X-Tex Ar...