Basic AT Commands for SIM900A GSM/GPRS Module
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- #Nexample #Arduino #Engineering
Download putty
www.chiark.gre...
AT To Check GSM MODULE
AT+CPIN? To Check The pin
AT+IPR=9600 To set the Baud Rate
AT&W To Save Baud Rate
AT+CGSN Request product serial
number identification
AT+CGMI Request manufacturer identification
AT+CGMM Request model identification
AT+CGMR Request revision identification
AT+CPAS Phone activity status
AT+CSQ Signal quality
AT+CMGF=1 To Set Message Format
AT+CMGS="Your Mobile Number" Request Message Sent
Type Your Message Press CTRL Z For Send
Support me With (Subscribe, Like, Share) if you Want !
Thank You
TH-cam : / nexample
Facebook : / nexamplefb
Instagram : / nexample
Twitter : / nexample_twits
Nice video to setup a module.
where is the rx and tx pins in this module
You Can see print on board
no sir not found.please,tell me there is 20 pins was there which is rx and tx?
Can you Show image ?
this is the image sir !