Fast and Proficient penny sorter

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ม.ค. 2025

ความคิดเห็น • 76

  • @billydow1971
    @billydow1971 5 ปีที่แล้ว +2

    Well done sir. I dont think its idiotic at all , saying no thanx to the way overpriced machines is a win. Thanks

  • @patrickmanasco5905
    @patrickmanasco5905 9 หลายเดือนก่อน +1

    The fact that was 6.50 shows how much inflation there is

  • @davesenor3146
    @davesenor3146 ปีที่แล้ว +1

    Awesome video!!

  • @bartdelabarre3432
    @bartdelabarre3432 3 ปีที่แล้ว +2

    Great! I like the commentary at the end of the vid and the self adjusting container position for the new pennies. The container moves to a location for a perfect "bounce then in" as a newer penny comes out of the chute. Congrats!

  • @patrickmanasco5905
    @patrickmanasco5905 9 หลายเดือนก่อน +1

    Love how the new Pennie’s perfectly bounce in

  • @DIYAllied
    @DIYAllied 5 ปีที่แล้ว +2

    Love it

  • @daveed1797
    @daveed1797 5 ปีที่แล้ว

    THIS IS THE COOLEST THING IV EVER SEEN!!!

    • @stclairstclair
      @stclairstclair  5 ปีที่แล้ว

      DaVeeD M. Thank you for watching.

  • @tracyeliason4566
    @tracyeliason4566 11 ปีที่แล้ว +1

    This is exactly what I was looking for. I just needed the inspiration and basic ouline of what it would look like. I think if I watched a breakdown to build it piece by piece it would just confuse me more. thanks again for putting this together and inspiring all of us soon to be penny horders!

  • @stclairstclair
    @stclairstclair  12 ปีที่แล้ว

    Plexiglass, but getting the fit so the gate swings like silk and lines up perfectly without hanging up was critical in obtaining reliability, i had to wet sand the parts.

  • @rjf2380
    @rjf2380 6 ปีที่แล้ว +2

    No , that is very smart an well planned out, great job, its people like you that we need to make things built in our own country, to put it in small words,,

    • @stclairstclair
      @stclairstclair  6 ปีที่แล้ว

      Thank you, i wish i had others to hang out with to build things, Did you see my homemade steam generator, They say only 10% of people will survive long term after a power outage, Now i really need to work on my liquor making skills, who would want to live on without a drink!

  • @stclairstclair
    @stclairstclair  5 ปีที่แล้ว

    I cant sell it, It's my only sorter, But I'm glad you watched.

  • @scrapman502
    @scrapman502 5 ปีที่แล้ว

    This thing works great, but it could use a modern upgrade. Get rid of the penny counterweight and paperclip scale. clip a neodymium magnet onto the end of the ramp. When a copper penny passes the magnet it will get slowed down considerably and drop nearly vertical. A Zinc penny will roll right past the magnet and fall considerably further away. All you need to do then is to put two separate jars at the end of the ramp, The copper pennies will fall into the jar closest to the end of the ramp and the zinc ones will fall into the jar furthest away from the end of the ramp. 100% accuracy. You might want to increase the pitch of the ramp a little to increase the drop speed. You can also increase the load rate into the ramp.

    • @stclairstclair
      @stclairstclair  5 ปีที่แล้ว

      Scrapman50, I cant change anything as doing so would cause my perfectly adjusted sorter to not work, I agree your plan sounds good, post a video when it's done.

  • @tirionlanaster2626
    @tirionlanaster2626 6 ปีที่แล้ว +1

    Nice

  • @n3glv
    @n3glv 6 ปีที่แล้ว

    A vending / slot machine / change machine feeder uses a disc with holes in it, on a stepper, they can be shockingly fast. (think jackpot in vegas) (the coins are in tubes above the wheel of course)

    • @stclairstclair
      @stclairstclair  6 ปีที่แล้ว +1

      I cant drop them any faster or i will end up with a log jamb due to the fact that i have to wait a moment for the penny to pass or fall, Thanks for watching!

  • @williammanning3174
    @williammanning3174 6 ปีที่แล้ว +1

    Check out "Cody's Lab". He made a sorter that uses magnets to slow the copper pennies down so they fall off the very end of the rail whereas the zinc pennies keep rolling fast and fall farther away from the end into a seperate container just past the one the copper pennies drop into.
    Anyway...your feed system would be a perfect match for his magnetic sorter. Good video.

    • @stclairstclair
      @stclairstclair  6 ปีที่แล้ว

      I would try but ive got a homemade gramophone going, Did you see my homemade steam generator model. Im not looking for hits, I just thought you might like it, thanks for watching.

    • @williammanning3174
      @williammanning3174 6 ปีที่แล้ว

      @@stclairstclair No. I'll check it out.

  • @connorkol
    @connorkol 12 ปีที่แล้ว

    what did you use for the fulcrum that has the counter weight and paperclip on?

  • @stclairstclair
    @stclairstclair  12 ปีที่แล้ว

    a tutorial on how to build one?, i could if you want me to, but because i built it on the fly there are no real specs, so the critical adjustments to get it to run perfectly would still be in your hands, im a mechanic and spent a few nights working thorugh it, but yes if you respond and tell me thats what you wanted.

  • @seahawks1185
    @seahawks1185 7 ปีที่แล้ว

    Simple and effective, love it.

    • @stclairstclair
      @stclairstclair  7 ปีที่แล้ว

      Thanks for the nice comment, now if i can only get the wife to give me some penny money.

  • @TsquareTalk
    @TsquareTalk 5 ปีที่แล้ว

    if you still have this would you sell it???? There may be a way to make money off this great idea.

  • @chevy6299
    @chevy6299 11 ปีที่แล้ว +1

    This is cool! I have a few hundred pennies that need sorting. maybe I can make something with out the motor, maybe not but worth a try.

  • @chemistryguy100
    @chemistryguy100 11 ปีที่แล้ว

    YES! Please make a tutorial! I REALLY need to make one of these, and have been racking my brain over different designs and possibilities. Especially on the weighted lever and the motor. Please!

  • @glasstronic
    @glasstronic 8 ปีที่แล้ว +1

    Very cool. Nice work!

    • @stclairstclair
      @stclairstclair  8 ปีที่แล้ว +1

      +glasstronic Thank you for the nice comment,, I checked your channel, we have much in common, please look at my other videos, I think you'll like them, P.S. you have a new subscriber!

    • @glasstronic
      @glasstronic 8 ปีที่แล้ว +1

      stclairstclair
      Likewise. ;-)

  • @coincleaningservice9430
    @coincleaningservice9430 10 ปีที่แล้ว +12

    Not idiotic at all. This is fantastic. What a cool and simple device. This is the first DIY version I've seen segregate based on weight.

  • @TopCat2021
    @TopCat2021 12 ปีที่แล้ว +1

    Good work that is a pretty cool little machine that you have there.
    Keep up the good work
    Dan

  • @alan30189
    @alan30189 6 ปีที่แล้ว

    You're a genius. Or the other guy is. Now rig it to two or three ramps and do two to three times as much.

  • @stclairstclair
    @stclairstclair  11 ปีที่แล้ว

    Thanks for the nice comment, good luck, keep the slot in the ramp the penny rolls down as narrow as possible, otherwise the penny will want to lay over as it rolls and that will slow the penny and cause headaches. also the angle of the ramp must be adjustabile, if you look at mine there is a white knob with a long screw under the ramp to change it's angle.

  • @Hockeyarcadeandcoins
    @Hockeyarcadeandcoins 6 ปีที่แล้ว +1

    How much?

    • @stclairstclair
      @stclairstclair  6 ปีที่แล้ว

      It's a one of a kind,
      Did you see my homemade steam engine?

  • @vernhartjr
    @vernhartjr 5 ปีที่แล้ว

    You got plans for this?

    • @stclairstclair
      @stclairstclair  5 ปีที่แล้ว +1

      vernhartjr < It was built off hand, The rail gap that the penny runs down is 1/8" the same size as the plexiglass i used for the gate, I didn't do a good job of showing it, it is the same as the fist wooden one i showed, also I never mentioned the thumbscrew I have on the ramp, you need to be able to finely tune your ramp up or down to effect the penny speed, thanks for watching.

  • @stclairstclair
    @stclairstclair  11 ปีที่แล้ว

    Comming from you, i am happy, i think i can do alot, then i see what you have done and i feel like damn he's pretty smart

  • @supersann1
    @supersann1 10 ปีที่แล้ว +1

    that's pretty awesome, good one!

  • @kirkramanauskas3232
    @kirkramanauskas3232 9 ปีที่แล้ว +1

    That's freaking cool! Off to check the other video, I want to build one. HOped there would be instructions in details.

  • @Haxpatty
    @Haxpatty 11 ปีที่แล้ว

    Maybe you can add 2 rails, increase the motor speed, and add a splitter for the rails. I think I might try your design my friend!

    • @playinlikejimi
      @playinlikejimi 11 ปีที่แล้ว

      I was going to suggest the same, kinda. I would increase the length of the arm on the motor so it stays the same speed, but slides the grabber under the hopper twice the distance. 'neutral' will have one hole on each side, as it pulls towards the motor, one hole will grab from the hopper, as it pushes to drop it on the rail, the other holder will grab a penny, as it pulls back towards the motor again it will drop on to a separate rail. I'm going to try it when I get a chance.
      In short, exact same design, at the exact same rate, but will operate 2 separate rails underneath (so technically doubling the rate)

  • @charger19691
    @charger19691 12 ปีที่แล้ว +1

    Nice engineering on your part! I like it!

  • @82ndsniper1
    @82ndsniper1 8 ปีที่แล้ว +1

    nice i like it

  • @157baron
    @157baron 10 ปีที่แล้ว +1

    I know I would love to have a tutorial on how any specs you can give and just an overview of the design features would be awesome! I love this idea and can see the potential it has! Any tips and information regarding the design would be greatly appreciated by others and myself who have watched this video! Thanks

  • @creativeobsin
    @creativeobsin 6 ปีที่แล้ว +1

    I like it :) the fact that the "gate" have to be backwards to function better is kind of fascinating to me, but when you think about it it's actually quite logical since the leverage angle is highest at the tip. Thanks for sharing :>

  • @Car1Sagan
    @Car1Sagan 5 ปีที่แล้ว

    How much can you load into the hopper before it jams? Where is the video you said you'd link to that inspired you?

    • @stclairstclair
      @stclairstclair  5 ปีที่แล้ว

      Silver Slingblade With this pop bottle hopper i can stack the pennies to the rim, but they must be stacked, I would recommend going with a clear tube that would hold them neat, Fish-tank lift tubes are cheap and might work much better, The video that inspired me was "Anyonefindamerica1" But he disappeared and I've never seen him again, thanks for watching! Go look at my homemade steam generator if you like, thanks again.

    • @stclairstclair
      @stclairstclair  5 ปีที่แล้ว

      Silver Slingblade , Also you need to make the ramp adjustable, if you look on mine you can see i have a white thumb screw with the bolt facing upwards on the front.

  • @stilltlrforlife
    @stilltlrforlife 9 ปีที่แล้ว +1

    very nice!! I'd love the plans for this.

  • @mitchabshier568
    @mitchabshier568 10 ปีที่แล้ว +2

    The end made me laugh. Good job!

  • @scottholmes238
    @scottholmes238 6 ปีที่แล้ว +1

    good idea, but a little too slow. It took about 30 seconds to sort 20 pennies, and I can sort an entire roll in that much time.

    • @stclairstclair
      @stclairstclair  6 ปีที่แล้ว

      I dont do enough penny's to worry about, it is very accurate though so im happy, thanks for watching!

  • @toddlfrank
    @toddlfrank 12 ปีที่แล้ว +1

    Nice build

  • @lemiwatts4275
    @lemiwatts4275 8 ปีที่แล้ว +2

    what if you add another rail to the other side so as the motor pushes one side out and the other side comes in to get a penny?you would have a rail on each side. would that work?

  • @teknostatik1055
    @teknostatik1055 6 ปีที่แล้ว +1

    Amazeballz!

  • @SmartSilverStacker
    @SmartSilverStacker 7 ปีที่แล้ว +1

    Haha not a waste this is a good machine based on sound principles. Nice practical engineering. Are you regularly sorting pennies with this? I would think a very large hopper would allow you to run this for a long time and sort a lot of pennies without having to be standing by

  • @spinesales
    @spinesales 11 ปีที่แล้ว

    Awesome!

  • @bobcanbeatyou
    @bobcanbeatyou 12 ปีที่แล้ว +1

    id buy this machine

  • @thejoshmoss
    @thejoshmoss 9 ปีที่แล้ว +1

    That"s way cool, i have a fish bowl full that I'd like to sort out for not other reason then to make a silly contraption like this.

  • @pshed99
    @pshed99 11 ปีที่แล้ว +1

    love,love,love it

  • @Yubber2127
    @Yubber2127 11 ปีที่แล้ว

    why you no make more videos?

  • @carterlavold3158
    @carterlavold3158 7 ปีที่แล้ว +2

    thats cool

  • @MrLeonard55
    @MrLeonard55 8 ปีที่แล้ว +4

    Nice and simple. I like it. Where can I get one of those motors and what size is it?Thanks. Leonard

  • @spencerjohnston8094
    @spencerjohnston8094 9 ปีที่แล้ว +6

    amazing!

  • @newdefsys
    @newdefsys 9 ปีที่แล้ว +6

    What is idiotic about a machine that functions properly ?

  • @djzman
    @djzman 9 ปีที่แล้ว

    how much to make me one? (im for real)

  • @arctictimberwolf
    @arctictimberwolf 7 ปีที่แล้ว +2

    The younger Folks don't know
    what VCR means...it's to Big of a Werd
    for their Zombified Video Game Brainz

    • @stclairstclair
      @stclairstclair  7 ปีที่แล้ว +1

      In the video i stated that i stole the VCR, I ment "took out the motor" from an old VCR, im surprised no one is calling me a thefe.

  • @scotty2221
    @scotty2221 8 ปีที่แล้ว

    Hi stclairstclar,
    Can you build me one for half dollars? Or send me details how to do it?