I had a model older than this one that I love. My sister has difficulty with tools that are too heavy and she actually loved mine and found it easy to use th-cam.com/users/postUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG . This is a newer model but was even lighter which she really appreciates. She enjoys it and I no longer have to go to her house to trim as she can handle it fine. Haven't used it enough to comment on the battery life but lithium batteries last longer than the old style. Being cordless makes it easy to trim the far edges of the property. The entire yard can be trimmed with one charged battery.
The metal line is very dangerous if it s broken and fly out with high speed,i tried once and a small part of the metal line went into my son's leg when he stood 2 metres away from me,i ran to him and pulled it out by hand, felt so lucky it did not go to the eyes,then never used the metal line again
I don't have a video on my adaptation. Nonetheless, here goes. I ran a solid piece of very thin stainless steed wire, similar to a bicycle spoke wire, but, out of stainless. Stainless steel will come right back to its shape during whacking. I ran it through the bobbin. I secured it with some little bolts that are hollow and have nuts. It is set. I fixed these little bolts and nuts to the exterior part of the hub, ran the wire through the bolt-nut assembly. I haven't used plastic trimmer wire in years. I do caution. Use pants and boots when operating this adaptation. You never know when the wire will shoot free and spike you or someone. Good luck.
The idea is good, but I believe that the unequal length of the steel wires added to the uneven weight of the welds, will eventually unbalance the rotating head and cause premature wear of the gears.
Excellent creation! I wonder, have you tried using heat shrink instead of solder to prevent the strands of the cable from coming apart? I think the heat shrink is going to make the trimmer cable lighter than soldered cable.
I've often wondered if I could replace string trimmer line with cable on my own. This is an ingenious solution in my opinion. The nut and bolt to secure the cable was a great idea.
I use my old guitar strings. They already have the little brass barrels on the end so they will stay in the holes with a washer in front of it.No welding, no soldering.Just a little wrap of duct tape to prevent the string from pushing back in while handling the trimmer when it’s not running. Centrifugal force keeps the strings in place while the trimmer is spinning.
Bass strings may work better since they are of larger diameter and the ball on the end is bigger as well. I had wanted to try that for a while now. After seeing this video I'm going to try it tomorrow
Sve je to lijepo brate moj, ali, prvo opasno je (ako iole znas o trimerisanju ne moram ti objasnjavati zasto), drugo, ne moze na glavu trimera da se stavlja sto oce, u odnosu na snagu i sam silk/najlon se bira, jer postoji opcija da nagrdis samu glavu a i trimer vremenom, trece, imas glave koje pasuju sa vise kraka nije sad da si patentirao ovo, cetvrto, imas silk/najlon sa aluminjumom....kad radis s trimerom, u otkos ide pun gas pa pustis pa sledeci otkos pun gas, nema turiranja, to je gusenje karburatora i plus cijepanje vremenom sajle gasa, to su osnove trimerisanjanije to golf dvojka pa da ga zajebava saug pa mu dodajes gas. Pozdrav!
Pa vidi ja sam tu da bih esperimentirao i pokazao ljudima dali to je u redu ili nije u redu ;) Ja znam da ne mozes stavit di je namjenjeno 2.4 sajla stavljat 3,0 :D Uživaj ;)
Interesting about the lead welding. I made a similar modification and at first it was bad ass but the wire started to fatigue and shoot out like bullets. I think I still have wire fragments in my legs.. I have a 10 year old Stihl FS 56, I found out that the fixcut 3-2 head replacement work’s best. I’m able to use .155 string and it’s super durable. I call my weed eater, the destroyer.. like from the 80s move Conan the destroyer..
Ive thought about this myself. Was afraid the splinters being thrown from cable could be dangerous over time. Notice it losing cable over time? Did the sodering help?
it's more dangerous, the cable wire split and join together then whole mechine vibrates can't handle. soldering will not give strength, arc welding will give strength however cable cut in the middle. I suggest cuse weed cutting plastic cable.
Good I did something similar bot not metal line because is more difficult for a trimmer. Remember the trimmer had some power to work and maybe cause damage. And be careful with that.
Hay cabezales en los que se puede poner este hilo pero yo ya lo probé hace años y no funciona se deshilacha todo enseguida, quizás con alambre de acero rígido y para cortar cesped sí funcione, en el huerto y con piedras y matas gordas no me atrevo , si se parte y te pega en una pierna te hará un gran agujero.
Looks like a rugged string substitute! Try so-me cutting oil on your drill bit while drilling prevent the dulling and overheating of the bit which is evident (black cutting edges on drill bit). Without the oil, the drill becomes overheated and looses temper causing it to get even duller! Nice idea and video :)
Great idea with the soldier on the braided cable!! Stopping it from fraying is the biggest issue with " steel braided cable" line in that configuration. Good job man!! I REALLY WISH people would STOP trashing other peoples great ideas on TH-cam. Yes there are better ways to do everything. If you have a better idea , make a video or respectfully comment your modification. These people are making the videos to help others, they're not going on Shark Tank to have their ideas picked apart by others. Thanks for your creative work Doc D.S. !!
Lazy people do not try to do good to others. When some good fellows try to be helpful to others, the lazy people DISCOURAGE the good people. I hope, they will try to be helpful to the world from this example, instead of criticizing them.
Great video dude! I hadn’t thought of solder to keep the cable from fraying. I was gonna try using JB weld (putty chemical weld). Does the solder last long? Depends on what yr cutting I guess!
This reminds me of my neighbor who started working on his car on a Saturday morning at 9am. When he finally walked out from under his car around 4pm, all sweaty, his knuckles busted and bleeding, I asked him, what were you doing? His answer was, "I just saved myself $40 bucks by changing the muffler all by myself".
pretty beleivable story actually sound probably like my neighbor🤣 just cause your faggot ass cant change a mufller doesnt mean theres not some men who can lol. who do you think changes the mufflers nigga. somebody🤣 and if youve wver done anything with exhaust on a car you would know that 95% of the time working on an exhaust youre gonna bust your fucking hand. it literally happens every time😭
Brilliant engineering. You should make these and sell them as a replacement for different types of streamers as a kit. Put a link on here for the website so people can order online .
Do you think that the nyloc nut would still be good after using welder with nut attached , as it would probably melt the nylon to a degree of making it non reliable?? Nice idea though (dangerous) but still nice👍.
@@cordellej A metal blade consumes much less power than line and has momentum. They are approved for use and there are no bits to fly off and injure anyone including the operator. All the main manufactures state in their manuals “ do not use wire”
@@robinwatts7079 yes i agree but what if our metal blade structs to the any stone or any hard surface then the blade can become life threatening where as in case of the any wire only the small part would be torn apart while making less damage to anyone !!
@@robinwatts7079 you do know that the metal blade will throw rocks and debris a few dozen meters away while the wire won't . Not to mention the tiny bits comming of the wire are so small there as close as the blades of grass that was just cut
@@robinwatts7079 They state that in their manuals because if using a system as just demonstrated was used by more and more people their sales of trimmer line would go downwards effecting their profits hugely. It's all about money and profits?
Only one question. Did, by chance, you check the balance before installing your experiment. And many many thanks for bringing out all the safety sissies and keyboard experts. I haven't laughed this much in a long time.
I was going to do this. I bought the cable and everything, then I thought what if...... I tossed the cable and bought regular string. I know this is probably tougher but the danger outweighs changing cord. Well done though thanks for sharing
Leaving plastic line pieces which take at least decades before decomposing all over the place is also a bad idea. When I realised I regularly litter my property with pounds of plastic (at least half a pound of trimmer line per year!) I felt pretty uneasy about that! I mostly use metal blades but in some places with lots of rocks plastic line is more convenient and does a better job...but I'm currently looking for something which can replace plastic...
Se romperá por algún lado y saldrá el trozo despedido haciendo mucho daño si pilla a alguien. Los rollos de hilo que se venden se van desgastando por la punta si se hace como es debido y solo es necesario cambiarlos cuando se han gastado igual que lo hace un lapicero y no salen trozos zumbando.
more trouble than it was worth. Just drill out a bumphead to take .130 or .155 line and you will get something that works even better. .105 line is a scam.
Dr lo felicito soy usuario frecuente de estás máquinas y siempre estoy buscando algo más eficiente y este sistema me convenció lo pondré a prueba ,felicidades
Una auténtica temeridad... Hace tiempo lo hice. Mucho cuidado en terrenos donde hay piedras. Las esquirlas que saltan del cable son auténticas balas. El cable termina desgastándose igual que los otros, pero la diferencia es que el cable es pura metralla. No se lo recomiendo a nadie
Y si se usa alambre tipo acero galvanizado? No hilo de alambre o cable, ese parece tipo chicote de moto,. Yo quiero hacer algo similar pero con alambre galvanizado
@@yamildiazmiranda9946 Yamil... el alambre galvanizado no creo que de buen resultado. Partiría de seguidas cerca de cabezal. La cuestión es probarlo, pero te aconsejo que te pongas un equipo de desactivación de bombas porque como se rompa el cable por el cabezal te empala vivo. Suerte y ya nos contarás. Saludos..
@@franciscojavierlopezmarin6428 hace un tiempo hice un cabezal tipo disco, del disco salían cuatro cuchillas que estaban sujetas a un eje dentro del disco, era un tornillo con su tuerca desgastada hasta que quedó redonda redonda. Pues hice la prueba y funcionó de maravilla las pocas veces que lo usé, probé con la máquina en un tronco y piedra, funcionó muy bien, es decir con el cuchillo de 3 puntas al ser una sola pza, cuando topa se transmite todo el golpe al codo o caja de engranes, pero al ser las.cuchillas movibles, topan y rebotan, lo.cual disminuye el golpe a la caja de engranes (lo cual es el fin, ya que así se reduce el desgaste del engrane por.golpes propios del uso), el disco y cuchillas eran de acero gris, entonces ahora voy a buscar donde quedó xq lo guarde en el taller entre tanto cachivache que se acumula, jejeje si no en cualquier caso haré otro disco con el acero gris, al cabezal normal no se lo pensaba poner xq al ser de plástico y metal suave, obviamente su desgaste sería altísimo
well...i've been thinking about utilizing a cable, too. Got the same Stihl model as you. So, ? to you is: what is that round steel base rotor you use ?? Is it salvaged off of something, or can we buy it ??? the thing you installed the two locking bolt nuts into....thanks. from Alberta Canada..
That worked great doc I noticed that the line ie cable didn't get bogged down or tangled up in the tall an thick weeds excellent no problem mate have a day love from TEXAS
There's a reason why they don't sell steel cable for string trimmers, it can cut through almost anything at the right speed. The movies aren't lying when you see a high tension cable snap and it chops someone in half. Do *NOT* try this at home.
Rozwiązanie linki w głowicy nie jest dobrym rozwiązaniem gdyż nie wytrzymuje tyle co żyłka sam to próbowałem więc wiem ja zamiast głowicy gdy mi się zepsuła użyłem aluminiowej nakładki na klamkę od drzwi paru nakładek i śruby mocującą głowicę żyłkę przewlekłem przez dwa otwory w nakładce dokręciłem i zamiast wydatku można kosić polecam wypróbowany sposób
big thick long zip ties work too, just zip them to a hole somehow somewhere and make sure the tail is not sticking out past the blade cutter ... whats nice about that is its still plastic and you don't need to worry about pieces of metal potentially flying at you ...
😂...❤ y luego se preguntan porque la mujer se encabrona......si pa cuando termino de ser su mensada ya hubiera terminado de cortar el sacate😂que se divierten!
I had a model older than this one that I love. My sister has difficulty with tools that are too heavy and she actually loved mine and found it easy to use th-cam.com/users/postUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG . This is a newer model but was even lighter which she really appreciates. She enjoys it and I no longer have to go to her house to trim as she can handle it fine. Haven't used it enough to comment on the battery life but lithium batteries last longer than the old style. Being cordless makes it easy to trim the far edges of the property. The entire yard can be trimmed with one charged battery.
The metal line is very dangerous if it s broken and fly out with high speed,i tried once and a small part of the metal line went into my son's leg when he stood 2 metres away from me,i ran to him and pulled it out by hand, felt so lucky it did not go to the eyes,then never used the metal line again
Yes, is very dangerous.
Ahh ok thanks for dissuading me from trying this. Appreciate it.
Yes it's better just to buy a big spool of line once for the whole season. It's cheap.
Thanks for sharing that, bro.
Show the metal line afther the 1 hour work ?
Everytime I see, "don't try this at home" I get an irresistible urge to try it.
I don't have a video on my adaptation. Nonetheless, here goes. I ran a solid piece of very thin stainless steed wire, similar to a bicycle spoke wire, but, out of stainless. Stainless steel will come right back to its shape during whacking. I ran it through the bobbin. I secured it with some little bolts that are hollow and have nuts. It is set. I fixed these little bolts and nuts to the exterior part of the hub, ran the wire through the bolt-nut assembly. I haven't used plastic trimmer wire in years. I do caution. Use pants and boots when operating this adaptation. You never know when the wire will shoot free and spike you or someone. Good luck.
Chaps and steel toed boots
How can I reach out to you? I wanna have a look at it
The idea is good, but I believe that the unequal length of the steel wires added to the uneven weight of the welds,
will eventually unbalance the rotating head and cause premature wear of the gears.
interesting, this is good if you live out in the countryside, plus some really good protected gear, but not in the city
I have a larger push string trimmer. I use the plastic coated cable. Keeps the strands together longer.
It does not work, if the cable touches the rocks or concrete, the cable's tiny wires will be apart and making problems.
Excellent creation! I wonder, have you tried using heat shrink instead of solder to prevent the strands of the cable from coming apart? I think the heat shrink is going to make the trimmer cable lighter than soldered cable.
I've often wondered if I could replace string trimmer line with cable on my own. This is an ingenious solution in my opinion. The nut and bolt to secure the cable was a great idea.
This is very dangeros
Boa idéia apesar do trabalho só me resta saber o tempo que dura os cabos e o efeito que faz em mato mais grosso porém é muito boa a idéia.
I use my old guitar strings. They already have the little brass barrels on the end so they will stay in the holes with a washer in front of it.No welding, no soldering.Just a little wrap of duct tape to prevent the string from pushing back in while handling the trimmer when it’s not running. Centrifugal force keeps the strings in place while the trimmer is spinning.
That's a good idea,I have guitar strings off all gauges, will definitely try this.
Bass strings may work better since they are of larger diameter and the ball on the end is bigger as well. I had wanted to try that for a while now. After seeing this video I'm going to try it tomorrow
Jack black
Bass guitar strings sound even better than guitar strings. pun intended...Let us know how that works on the trimmer..
Sve je to lijepo brate moj, ali, prvo opasno je (ako iole znas o trimerisanju ne moram ti objasnjavati zasto), drugo, ne moze na glavu trimera da se stavlja sto oce, u odnosu na snagu i sam silk/najlon se bira, jer postoji opcija da nagrdis samu glavu a i trimer vremenom, trece, imas glave koje pasuju sa vise kraka nije sad da si patentirao ovo, cetvrto, imas silk/najlon sa aluminjumom....kad radis s trimerom, u otkos ide pun gas pa pustis pa sledeci otkos pun gas, nema turiranja, to je gusenje karburatora i plus cijepanje vremenom sajle gasa, to su osnove trimerisanjanije to golf dvojka pa da ga zajebava saug pa mu dodajes gas. Pozdrav!
Pa vidi ja sam tu da bih esperimentirao i pokazao ljudima dali to je u redu ili nije u redu ;)
Ja znam da ne mozes stavit di je namjenjeno 2.4 sajla stavljat 3,0 :D
Uživaj ;)
Interesting about the lead welding. I made a similar modification and at first it was bad ass but the wire started to fatigue and shoot out like bullets. I think I still have wire fragments in my legs..
I have a 10 year old Stihl FS 56, I found out that the fixcut 3-2 head replacement work’s best. I’m able to use .155 string and it’s super durable. I call my weed eater, the destroyer.. like from the 80s move Conan the destroyer..
Roy tem como vc me mostrar com ficou essa adaptação que vc fez??? Na sua sthill 56.👍
Ive thought about this myself. Was afraid the splinters being thrown from cable could be dangerous over time. Notice it losing cable over time? Did the sodering help?
It will create lots of vibration because weight is not balanced in both sides.
it's more dangerous, the cable wire split and join together then whole mechine vibrates can't handle. soldering will not give strength, arc welding will give strength however cable cut in the middle. I suggest cuse weed cutting plastic cable.
Good I did something similar bot not metal line because is more difficult for a trimmer. Remember the trimmer had some power to work and maybe cause damage. And be careful with that.
Someone should give this young man a pat on the back ,give him a job with top money doing inventing
И инвалидность
Работа проделана большая, но трос срабатывается быстрее чем леска.
Проверено лично. Так что не советую заморачиваться.
Saves on polluting with microplastic waste
But he coated the wire with solder, which was likely largely lead, in which case, micron sized particulate lead was sprayed over his back yard.
Применение лужения в данном случае - отличная идея! Лайк однозначно!
This is more practical as you can get the DIY parts easily in the local hardware stores. Thanks for sharing 👍🏼
Hay cabezales en los que se puede poner este hilo pero yo ya lo probé hace años y no funciona se deshilacha todo enseguida, quizás con alambre de acero rígido y para cortar cesped sí funcione, en el huerto y con piedras y matas gordas no me atrevo , si se parte y te pega en una pierna te hará un gran agujero.
Looks like a rugged string substitute! Try so-me cutting oil on your drill bit while drilling prevent the dulling and overheating of the bit which is evident (black cutting edges on drill bit). Without the oil, the drill becomes overheated and looses temper causing it to get even duller! Nice idea and video :)
Great idea with the soldier on the braided cable!! Stopping it from fraying is the biggest issue with " steel braided cable" line in that configuration. Good job man!!
I REALLY WISH people would STOP trashing other peoples great ideas on TH-cam. Yes there are better ways to do everything. If you have a better idea , make a video or respectfully comment your modification. These people are making the videos to help others, they're not going on Shark Tank to have their ideas picked apart by others.
Thanks for your creative work Doc D.S. !!
Lazy people do not try to do good to others. When some good fellows try to be helpful to others, the lazy people DISCOURAGE the good people. I hope, they will try to be helpful to the world from this example, instead of criticizing them.
You are only cutting soft grass. Try in the forest area as well.
Great video dude! I hadn’t thought of solder to keep the cable from fraying. I was gonna try using JB weld (putty chemical weld). Does the solder last long? Depends on what yr cutting I guess!
Amazing... They should put on the market... Same like metallic blades for the trimmer... 👍
Nice job guy..... Very dangerous
Why not use #9 tie wire or baling wire? don't understand having to go through the trouble of soldering that cable. that solder won't hold up either
This reminds me of my neighbor who started working on his car on a Saturday morning at 9am. When he finally walked out from under his car around 4pm, all sweaty, his knuckles busted and bleeding, I asked him, what were you doing? His answer was, "I just saved myself $40 bucks by changing the muffler all by myself".
That didn't happen
Whatever !!!!
Do you feel better now that you took the time to just make some total bull crap comment up ????
Get a life
pretty beleivable story actually sound probably like my neighbor🤣 just cause your faggot ass cant change a mufller doesnt mean theres not some men who can lol. who do you think changes the mufflers nigga. somebody🤣 and if youve wver done anything with exhaust on a car you would know that 95% of the time working on an exhaust youre gonna bust your fucking hand. it literally happens every time😭
He only saved $40 changing a muffler? This story happened in what, 1987? Derp.
@@MarkRayBeach Close, it was around 1991.
Brilliant engineering. You should make these and sell them as a replacement for different types of streamers as a kit. Put a link on here for the website so people can order online .
Gracias por compartir dicho conocimiento, yá que a muchos nos es de beneficio/ adelante.!!
Yo descubrí eso hace 15 años atrás
@@manuelodriguezrodriguez9896 lo hubieras compartido
Using a pivot trim type head would save a ton of trouble. Would soldering like that work for 1/16" stainless cable?
Doesn't it's particle fly after long use.? I'm afraid to use this without any gears on 😶
Its particle? The wire doesn't own any particle. The wire could not brittle and turn into particles.
@@carlosprietocarlosprieto8950 i mean metal which may break from this wire.
@@rajatrana3329 I see, no, no particles are freed from this wire. Besides, the wire was reinforced with soldering
Yes. The cable frays and breaks apart. Very dangerous.
Do you think that the nyloc nut would still be good after using welder with nut attached , as it would probably melt the nylon to a degree of making it non reliable?? Nice idea though (dangerous) but still nice👍.
Nice job. I tried something similar with an old electric strimmer, total fail, the motor couldn't cope with the extra pull of the heavier cables
Very good, I'm also developing something similar here in southern Brazil.
Good luck and God bless.
super si lik stvarno mi je sve zanimljivo gledat ali više volim restauracije
ajde do 100k
Hvala ti od
I ran out of line on a job, used speaker wire, my legs were not happy. The forementioned unseen shrapnel was painful.
1. How did you do soft weld (lead) over steel wire? 2. Does not work, steel wire snaps after 5 min use. Chain saw is best but even that breaks.
Very dangerous! Why don’t you just use the metal blade you have standing by the doorway?
cause its less dangerous than the metal blade
@@cordellej A metal blade consumes much less power than line and has momentum. They are approved for use and there are no bits to fly off and injure anyone including the operator. All the main manufactures state in their manuals “ do not use wire”
@@robinwatts7079 yes i agree but what if our metal blade structs to the any stone or any hard surface then the blade can become life threatening
where as in case of the any wire only the small part would be torn apart while making less damage to anyone !!
@@robinwatts7079 you do know that the metal blade will throw rocks and debris a few dozen meters away while the wire won't . Not to mention the tiny bits comming of the wire are so small there as close as the blades of grass that was just cut
@@robinwatts7079 They state that in their manuals because if using a system as just demonstrated was used by more and more people their sales of trimmer line would go downwards effecting their profits hugely. It's all about money and profits?
Only one question. Did, by chance, you check the balance before installing your experiment.
And many many thanks for bringing out all the safety sissies and keyboard experts. I haven't laughed this much in a long time.
I was going to do this. I bought the cable and everything, then I thought what if...... I tossed the cable and bought regular string. I know this is probably tougher but the danger outweighs changing cord. Well done though thanks for sharing
Me gusta mucho esa idea, la voy a tratar, creo que tienes un talento de reinvertar.
Leaving steel wire pieces all over the place or in your leg is a bad idea.
Leaving plastic line pieces which take at least decades before decomposing all over the place is also a bad idea. When I realised I regularly litter my property with pounds of plastic (at least half a pound of trimmer line per year!) I felt pretty uneasy about that! I mostly use metal blades but in some places with lots of rocks plastic line is more convenient and does a better job...but I'm currently looking for something which can replace plastic...
Protect your legs 🤣😆
Se romperá por algún lado y saldrá el trozo despedido haciendo mucho daño si pilla a alguien. Los rollos de hilo que se venden se van desgastando por la punta si se hace como es debido y solo es necesario cambiarlos cuando se han gastado igual que lo hace un lapicero y no salen trozos zumbando.
I used wire a couple of years ago. Never again. Forgot I had wire one day and trimmed up around my water main and cut through the pipe! 😕
The head design is good, but I’d stick with nylon. Cheaper and easier to deal with. Plus less risk for injury.
That's why I never stopped making stuff because cool videos like this always keeps me learning and making things better thanks for sharing
I thought about that idea too , was a little worried about clipping my leg with the cable
steven mckinsey natural selection
Use protection... Wear ppe 😎
smart idea i will try this thanks for sharing
you may know this but.... theres horseradish growing there!!!
if parts of the wire flies all around.. than is fun!
This is still an excellent idea
Tony Franzoni
more trouble than it was worth. Just drill out a bumphead to take .130 or .155 line and you will get something that works even better. .105 line is a scam.
Dr lo felicito soy usuario frecuente de estás máquinas y siempre estoy buscando algo más eficiente y este sistema me convenció lo pondré a prueba ,felicidades
Ja esa guaya no te dura 50 segundos después de puesta a travajar 👍
Make sure u got good motorcycle boots on when using lol
Pretty good... gonna have to try it.
Una auténtica temeridad... Hace tiempo lo hice. Mucho cuidado en terrenos donde hay piedras. Las esquirlas que saltan del cable son auténticas balas. El cable termina desgastándose igual que los otros, pero la diferencia es que el cable es pura metralla. No se lo recomiendo a nadie
Y si se usa alambre tipo acero galvanizado? No hilo de alambre o cable, ese parece tipo chicote de moto,. Yo quiero hacer algo similar pero con alambre galvanizado
@@yamildiazmiranda9946 Yamil... el alambre galvanizado no creo que de buen resultado. Partiría de seguidas cerca de cabezal. La cuestión es probarlo, pero te aconsejo que te pongas un equipo de desactivación de bombas porque como se rompa el cable por el cabezal te empala vivo. Suerte y ya nos contarás. Saludos..
@@franciscojavierlopezmarin6428 hace un tiempo hice un cabezal tipo disco, del disco salían cuatro cuchillas que estaban sujetas a un eje dentro del disco, era un tornillo con su tuerca desgastada hasta que quedó redonda redonda. Pues hice la prueba y funcionó de maravilla las pocas veces que lo usé, probé con la máquina en un tronco y piedra, funcionó muy bien, es decir con el cuchillo de 3 puntas al ser una sola pza, cuando topa se transmite todo el golpe al codo o caja de engranes, pero al ser las.cuchillas movibles, topan y rebotan, lo.cual disminuye el golpe a la caja de engranes (lo cual es el fin, ya que así se reduce el desgaste del engrane por.golpes propios del uso), el disco y cuchillas eran de acero gris, entonces ahora voy a buscar donde quedó xq lo guarde en el taller entre tanto cachivache que se acumula, jejeje si no en cualquier caso haré otro disco con el acero gris, al cabezal normal no se lo pensaba poner xq al ser de plástico y metal suave, obviamente su desgaste sería altísimo
well...i've been thinking about utilizing a cable, too. Got the same Stihl model as you. So, ? to you is: what is that round steel base rotor you use ?? Is it salvaged off of something, or can we buy it ??? the thing you installed the two locking bolt nuts into....thanks. from Alberta Canada..
A nice invention, Quick and inventive
Kolega super video. 👍
This really works! Cuts really well. Much quicker than nylon.
Dangerous. Steel core will broken with stone , your eyes
That worked great doc I noticed that the line ie cable didn't get bogged down or tangled up in the tall an thick weeds excellent no problem mate have a day love from TEXAS
Try Tri-clone trimmer head on your next heavy weed eating day's, it's a BEAST!
Tangle-free, save time and easy to use
Looks like an awesome fire starter
I am thinking of using the really thin red and black electrical cables I pulled out of a light fixture as a line you think it will work?
No. They’ll snap in seconds. Tried it!
Only the doctor can use this constructions ☝️🤣
It’s kopper it will probably break…… but try it anyway and make sure to post it to YT. 🤘🏻🤘🏻🤘🏻
There's a reason why they don't sell steel cable for string trimmers, it can cut through almost anything at the right speed. The movies aren't lying when you see a high tension cable snap and it chops someone in half. Do *NOT* try this at home.
Yes
Bravo Man ¡¡¡ please Tell me wen You had made the tutorial for some electric trimer version. Gracias ¡
You are lucky and talented. You have all the tools to experiment. Tools will make life easier. Keep it up.
I will try this, looks like a fun project.
Ótima idéia. Vou fazer um igual. Parabéns pela idéia.
34 33020 re 2 di
Время зря потерял, посмотрев это.
Now That's What I Call a Good Grass Timmer. Perfect
Wow, it is great. Sorry my english is not perfect: Can i bye it from you for my mashine??
Rozwiązanie linki w głowicy nie jest dobrym rozwiązaniem gdyż nie wytrzymuje tyle co żyłka sam to próbowałem więc wiem ja zamiast głowicy gdy mi się zepsuła użyłem aluminiowej nakładki na klamkę od drzwi paru nakładek i śruby mocującą głowicę żyłkę przewlekłem przez dwa otwory w nakładce dokręciłem i zamiast wydatku można kosić polecam wypróbowany sposób
Donde consigo la chapa por la cual cruzan esos cables? Saludos
Absolute genius! I needed that for clearing deer trails weeks ago. Get that thing on shark tank now!
Can you do this with a electric weedeater?
Dobra ideja a dobar ti I kukuruz, rodio ove godine dobro 😂😂😂
Пробовали лет 15 назад на работе заменять леску . Не выходит. Пропаянный трос за секунду распаевается в хлам . Чо только не мудрили , бестолку.
а если не пропаивать, а обварить сваркой кончики троса...тогда расплетения быть не сможет физически...
That is really cool. Very good idea, you rock.
Muy bueno, felicitaciones, saludos desde Jamundí Valle del Cauca Colombia
Bro you are to smart🤯
A grass blade works much better and cuts 1 inch tree saplings and is much less dangerous.
Some people are thinking about hitting a power cable.. Same thing you can do it with a blade... Make the blade from plastic 😁😂
Excellent idea my friend you did a real good job
Really awesome it's super idea for Grass cutting I like it and realy good thinking
Great idea!
LUKA GNANAM =g
Very dangerous.
The cable break into pieces and spread like nail bomb. Careful.
ummm. how many of us have a workshop full of all those tools to make this?
big thick long zip ties work too, just zip them to a hole somehow somewhere and make sure the tail is not sticking out past the blade cutter ... whats nice about that is its still plastic and you don't need to worry about pieces of metal potentially flying at you ...
Just buy better line
The solder was a good idea
Ti si kreativ mashin sadist... ☝️😉 😁
This to all negativity comments. A REAL LANDSCAPER WEAR PROTECTIVE GEARS AND CLOTHING and u will be safe
After this process you'll want to trim with just flip flops on!
I used to just put a zip tie around the head of my weed wacker when I had no line. Works pretty good
😂...❤ y luego se preguntan porque la mujer se encabrona......si pa cuando termino de ser su mensada ya hubiera terminado de cortar el sacate😂que se divierten!