Looking good! Can you add a link to the paper roll you have hanging on the side to protect your table top? The ones i'm finding won't stop glue moisture and stain/paint from bleeding through. Thanks!
The author does like to from scratch, th-cam.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
I liked the project and the video. Since you asked for feedback....In my shop, I use gloves and paper towels, but also wax paper (not enough rags for three boxes). My cloth rags are uniform, and used for applying or wiping stain (so I don't need three separate boxes). When I use paper towels, (as you said) my hands are already covered in water, paint or stain. So grabbing the paper roll to rip off one is a problem. With wax paper, I tear off small pieces, to keep glue off the clamps and workbench. So my ideal rack would have: - Two or more rolls, but restrained (slightly) to make them easier to tear off just one. Maybe add an edge to cut off the wax paper piece - One (or no) box for cloth towels - Keep the glove box as you didThe 3-D printed parts are (sort of) cheating, as few of us have these. Routing that "L"-shaped channel for the roll bar(s) would be fair, though.
Both my guy and I have separate shops. His shop is tractors, painting tractors or trucks, tractor repair/rebuild, combine work and occasionally a warm space for me to work on wood projects, furniture or vintage camper restoration. My shop is mostly camping, project building, home improvement, gardening and wood projects. We both have the need for paper towels, rags and gloves! I am a re-user so I have a crap ton of odd lumber. I tend not to buy plans as I would have to have all the same type of material. I like to see ideas and wing it. I LOVE French cleats too!!! Nothing should be hung on a wall without one! Thanks for the video and ideas! NOTE: what I would buy is the paper towel dowel holders and spacers, but I will make them out of wood..
Just keep your videos and narranting keep coming. Really enjoying watching your stuff. And so much greet tools in the states.... and cheap (in relation to here in Denmark)
Awesome cabinet. Much fancier than my setup. My wife has a cat so I get cat litter buckets. Hinged lid and rectangular. I cut a 4" circle in the lower face of the bucket to pull the rags out. I stick the bucket on a shelf or hang from the handle depending on where I need it.
@ShopNation Liked the vid. Probably going to do something very similar but with a CNC router. Not to out do what you have done but just because I can. Thanks for the idea. Probably best in class of what I have seen thus far.
Liked everything except the paper towel holder. I can make everything except the 3D printing! Keeping things light and Humorous is a great touch as well... Keep up the good work.
LOL, yep same here...so I had to scrap the plans to make one of these because I don't have a 3D printer....I'll pickup the plans again when I have a 3D printer, then I'll just 3D print the whole cabinet HAHA!!
@@wildbill23cI don't have a 3D printer either but I made them with plywood, a forstner bit and a chisel. You don't need a 3D printer. I'm sure a hardware store might also have something similar.
@@jac_builtWoodworks I was just going to cut some slots in some scrap wood to insert a dowel, but the 3D printer would be a fun tool to have otherwise LOL.
Great idea, thanks. I use all the same towels, but use both plain white paper and blue shop towels. I'll have to figure out a way to incorporate a second roll holder into it. - Chris
Like your DIY storage items I built the same roller holder for construction paper used when doing glue ups for segmented builds roll off what you need and I do as you did just reload paper back onto the roll use it again as needed 👍
Looks great! I' d like one for my kitchen ... I would use it for my tea towels, cloths and sponges etc ! I have to convince my brother to build me one.
I would build one for you. I am looking for thing to do if I ever get free time :-) I bet I will be making a couple of these to install at both of my daughters homes...
Extremely nice.....They say......necessity is the mother of all invention!!! That is an extremely useful product.....Thank you for making a video on it, and sharing it....Well done!!
Great build. I think I will build one also. With a couple changes I am going to put a hook below the gloves to hold my hearing protection so I don't have to look for those also. And I am going to make the entire front plexiglass. Otherwise great idea.
Great video and yes i am one of those people who has a roll of paper, and a box of gloves sitting there catching dust, along with my box of plasters (band aid) as well. Thanks for the idea, i have seen similar but this one is spot on. Barry (ENG)
Hey everyone! Lot's have asked for plans so I took the time to make some. Digital plans available here bit.ly/3ZXgjkg
Looking good! Can you add a link to the paper roll you have hanging on the side to protect your table top? The ones i'm finding won't stop glue moisture and stain/paint from bleeding through. Thanks!
@@Levy4U I believe that is Rosin Paper, comes in a long roll at most home centers.
The author does like to from scratch, th-cam.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
Who could argue with way faster and no need for dust collection as you said? 🤷 Badass karate chop my friend! 😂 😂 😂
Congratulations on your subscribers
love your jobs.. i think your jigsaw skills are amazing!!
Good job Shop nation and I'm now subscribed!
Shop idea for extension cords......ready GO!
Nice project and first time viewer. I would leave the slots open to push rags down when they get hung up.
That’s a great suggestion, I’ve gotten that one a couple times!
GOOD JOB 👍
My China. I dig this thang
Well done!
Awesome job!
Entertaining and a nice project
This is one of those projects that if you’re gonna build one, might as well build two at the same time!
Great job.
I bought the plans and built it. I am impressed with the finished product! Thank you.
Glad you liked it!
I enjoyed you shop projects very much,thanks for your efforts
Awesome project!
That’s one helluva nice shop. Mine is a closet next to that! Love it.
Great job!
Nice Idea
Great video as always..
Great video. Will definitely be building this soon
Looks good!
You always do awesome work I got excellent ideas from you maybe call it a shop despencer for all your towels and paper towel holders
Great idea!
Pretty Darn kool !!!!!!
I loved it thank you
Nice video
I liked the project and the video. Since you asked for feedback....In my shop, I use gloves and paper towels, but also wax paper (not enough rags for three boxes). My cloth rags are uniform, and used for applying or wiping stain (so I don't need three separate boxes). When I use paper towels, (as you said) my hands are already covered in water, paint or stain. So grabbing the paper roll to rip off one is a problem. With wax paper, I tear off small pieces, to keep glue off the clamps and workbench. So my ideal rack would have: - Two or more rolls, but restrained (slightly) to make them easier to tear off just one. Maybe add an edge to cut off the wax paper piece - One (or no) box for cloth towels - Keep the glove box as you didThe 3-D printed parts are (sort of) cheating, as few of us have these. Routing that "L"-shaped channel for the roll bar(s) would be fair, though.
45 degree ramp blocks. Optional, but BRILLIANT. Just awesome.
Very cool
Oh Yeah Mark Forged All The Way!!!!!!!!!!!!
Nice job Trav
I love it. Good idea 🇺🇲👍
Very nice!
Bien hecho, saludos, desde Cancún q roo
I love it!
Very nice and clean
Both my guy and I have separate shops. His shop is tractors, painting tractors or trucks, tractor repair/rebuild, combine work and occasionally a warm space for me to work on wood projects, furniture or vintage camper restoration. My shop is mostly camping, project building, home improvement, gardening and wood projects. We both have the need for paper towels, rags and gloves! I am a re-user so I have a crap ton of odd lumber. I tend not to buy plans as I would have to have all the same type of material. I like to see ideas and wing it. I LOVE French cleats too!!! Nothing should be hung on a wall without one! Thanks for the video and ideas! NOTE: what I would buy is the paper towel dowel holders and spacers, but I will make them out of wood..
Great video as always!
Barry Roberts comment below has inspired me to consider a small first aid cabinet for band-aids and antiseptic ....
Double the subscribers now
Nice build I'll be using this myself thank you!
Shop rag receptacle. Boom #jotthatdown
I really like your work. I send my greetings from Hungary
Isn't it okay if I make a similar one?
Of course! Hello Hungary! 🇭🇺
@@ShopNation th-cam.com/video/224Siq-2Efg/w-d-xo.html THANKS FOR THE IDEA!
WATCH THE END OF THE VIDEO
i video vary munch i liked the idea what u did with the shop rags stay safe
Sweet! 👍
Nice ❤ it…Thank you for sharing your ideas…
Love this guy he is straight and professional easy-to-understand step-by-step instructions can't get any better
How am I just now discovering your channel?!? It’s the holy grail of diy
Wow thanks!
Great job sir
Buen trabajo. Gracias.
Nice job, thanks for the share!
This is my first video for Shop Nation. Great project and I will be back!
I’m very curious to know why 2 people disliked this. This is an awesome shop project that everyone could use!
Some people just can’t help themselves!
Just keep your videos and narranting keep coming. Really enjoying watching your stuff. And so much greet tools in the states.... and cheap (in relation to here in Denmark)
Very nice, I'm going to use this. thank you
Awesome cabinet. Much fancier than my setup. My wife has a cat so I get cat litter buckets. Hinged lid and rectangular. I cut a 4" circle in the lower face of the bucket to pull the rags out. I stick the bucket on a shelf or hang from the handle depending on where I need it.
Hey that works too! Pretty creative
Enjoyed this one! Probably going to do this and add a spot on the other side for a pump bottle of orange hand cleaner.
Or hand sanitizer the jumbo size🙌
Awesome
That is very cool
Perfect... my next project right here!
Nice!
@ShopNation Liked the vid. Probably going to do something very similar but with a CNC router. Not to out do what you have done but just because I can. Thanks for the idea. Probably best in class of what I have seen thus far.
Liked everything except the paper towel holder. I can make everything except the 3D printing! Keeping things light and Humorous is a great touch as well... Keep up the good work.
LOL, yep same here...so I had to scrap the plans to make one of these because I don't have a 3D printer....I'll pickup the plans again when I have a 3D printer, then I'll just 3D print the whole cabinet HAHA!!
@@wildbill23cI don't have a 3D printer either but I made them with plywood, a forstner bit and a chisel. You don't need a 3D printer. I'm sure a hardware store might also have something similar.
@@jac_builtWoodworks I was just going to cut some slots in some scrap wood to insert a dowel, but the 3D printer would be a fun tool to have otherwise LOL.
Awesome build !! Been missing shop nation!!!!
His shop looks more like a kitchen than my kitchen looks like a kitchen😂
Nothing wrong with having standards for you garage space
Another nice compact usable storage unit.
Great idea, thanks. I use all the same towels, but use both plain white paper and blue shop towels. I'll have to figure out a way to incorporate a second roll holder into it. - Chris
Nice project, great build, thumbs up!!! Just don't forget your safety glasses!!! Just think of Norm saying it every time you walk into the shop.
Norm knows best
Your shop is coming together nicely. Great new addition.
Sweet
The nitrile gloves box slot is a great idea. I will adapt this for my shop
Great videos brother. Like the karate chop!
Got to build one of these as it is a nearly perfect solution to my basket of chaos with rags mixed in.
What a GREAT idea!
Great idea, I will be building on of these!
Cool!!
Nicely done man. For sure making this for my new shop.
Very nice, what a great storage idea.
Very Usefull Build indeed ! Nice One
Like your DIY storage items I built the same roller holder for construction paper used when doing glue ups for segmented builds roll off what you need and I do as you did just reload paper back onto the roll use it again as needed 👍
Looks great!
I' d like one for my kitchen ...
I would use it for my tea towels, cloths and sponges etc !
I have to convince my brother to build me one.
I would build one for you. I am looking for thing to do if I ever get free time :-)
I bet I will be making a couple of these to install at both of my daughters homes...
Simple idea. Well executed. Nicely done!
Worthwhile, yet modest project,...almost an afterthought...bet it gets a lot of use...thx
Really neat idea and build. You hit it out of the park.
It's a shop rag caddy! Definitely need to build me one of dem!
Goddamn Trav! You're karate skills are mint!!!
Love this! I will be copying this build for my Mountain Garage!
good stuff!
I like it! What’s next!
Good job, we love your work down here in south ga
Extremely nice.....They say......necessity is the mother of all invention!!! That is an extremely useful product.....Thank you for making a video on it, and sharing it....Well done!!
Nice project man, simple and effective
Always a big problem I never considered fully. Thanks for sharing your idea. Nice video as always.
Great design! Your videos are getting better all the time too!
Thank you
Great build. I think I will build one also. With a couple changes I am going to put a hook below the gloves to hold my hearing protection so I don't have to look for those also. And I am going to make the entire front plexiglass. Otherwise great idea.
Nice! I like the hook idea, I've been trying to figure out what to put there...
Great design!!!
Great video and yes i am one of those people who has a roll of paper, and a box of gloves sitting there catching dust, along with my box of plasters (band aid) as well.
Thanks for the idea, i have seen similar but this one is spot on.
Barry (ENG)