using and re charring barrels
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- We discuss barrels in general, their use, benefit , measurements and how to re-char them once they are neutral. We try to explain as much s we can in a short time to help you decide which barrel to chose as well as how to re-use them once you empty it. Although barrels are primarily used for spirits they also work well to mature wines. Hope you get something out of this video.
It never ever ceases to amaze me...... who the hell is disliking these videos. George does nothing other that further this craft give some respect weather you agree or not.
this guy is like watching Mr. Wizard
Those that complain also never validate. Afraid to learn something new, I guess.
How about if you leave a new piece of fresh wood in the barrel before you close it back up
Don’t worry, they got rid of the dislike button during Biden’s last campaign 😂 so pathetic
George, you are a fount of knowledge and credit to your industry. Your series of educational videos on mashing, distilling, cutting and aging are the best on the internet.
Over the years I have had many wine barrels refurbished. Typically they are re-shaved before being charred again. Shaving them exposes the new oak again so it can impart those flavours you are looking for. Varnishing is a no no... so the contents can breath and naturally evaporate. Good video on how to pull the barrel apart.
Thanks for doing these videos; they're very informative and you convey the information in a lively, upbeat manner which makes them very enjoyable to watch.....
Thank you! Amazing videos and information. Learning something new every-time. South African fan.
Just started following ya'll and have been instantly drawn in by your vast knowledge. What I enjoy the most is that you manage to fraise this complicated processes in terms that simple person like myself can understand. I look forward to watching the rest of your segments and maybe even chatting with you on the phone. Thank you for your time and effort.
Thank you.
Thanks for showing me how to re-char! I've been afraid to take apart my barrel, but you made it look easy!
I personally use both methods: Chip aging (mellowing, flavoring) and traditional barrel aging. The trade-off is: faster with chips, but better, more rounded flavors from the barrel, BUT, lots of evaporation loss during aging. I personally prefer Med-toast Hungarian chips, cubes actually. They are mellow and impart somewhat between American and French oak. I age good quality Tequila in my 2 and 3 liter med-char American Oak barrels. First batch ages about 6 months, 2nd about 8-10, 3rd about a year. They definitely have a service life to them, but do work well. If I go longer then a year, there is too much Tequila loss to evaporation (Diablo's Share) and aging content otherwise gets too diluted with the several toppings. The popularity of these small oak barrels has spawned all manner of sellers all over the internet with widely varying quality, product support and knowledge. However, there appears to be only two actual makers of the good quality aging barrels; one in Tennessee and another in Arkansas. I like to polish the hoops and lightly stain my barrels and finish and stain the stands; they look and smell beautiful. I have aged/made some absolutely stunning Extra Anejo Tequila.
Hey there, roughly how much % wise would you lose in evaporation over a year aging in a barrel? If you had 10L to start, would you lose 10% (1L) over a year? More? Less?
I actually started the same way only with bourbon. Ive since moved my way up to 53 gallon barrels and here is my method. I’ve given up the very small barrels. Nothing under 5 gallon. Usually 7-15g charred brand new oak is what I’m working with. I age in these smaller barrels for about 6 months to a year depending on season and spirit as well as barrel. I check monthly for taste. When I feel they’re where I want them I then dump them into a once used fresh emptied X bourbon barrel. By this point the spirit being in the small barrel has a jump start and is about equivalent to a 3year maybe 4 year bourbon. I then let it sit in the cask for as long as desired. I have one that is 7 years old. It’s like nothing I can buy in a store in my opinion and my friends agree. One concern I had was when you said you stain your barrel. I’d strongly caution you against that. Since the barrel staves are porous and breath they inherit their surroundings. Barrels aged near iron have a diff taste than those around brick or wood. This being the case imagine the flavor and potential off and even dangerous things you’re allowing your barrels to breath into your spirit. I could have misread your comment. If so I’m sorry. You may have meant when the barrel is spent. Regardless brother your method sounds delicious and I’d love to trade some product and pick your brain!! Let me know if I’ve misunderstood you or if you know something I don’t because I have about 30 old small cask (20L/5gallon- 10 gallon) and some of them have a spigot. Most are professional level ordered from cooperage but still, I have always wanted to stain them and save them. They’re beautiful pieces of trade craft. Thanks for your time and I appreciate your contribution to the community. I’d really love to get my hands on some of your tequila. I bet it is unreal how smooth and delicious it is.
I've still got some good use in my barrels, but was wondering about re-char. As usual, George has covered it 👍👍 Thanks George
#HAPPYDISTILLING 🥃
Always a pleasure to watch George ? Brilliant
After you use it 5 times you can add some lightly toasted chips in there and add some medium and heavy toasted chips. Then you could probably get another 3 more batches in there. By aging it in a barrel it gets some air over time.
I saw your comment so once I'm done using it 5 times, I just add the chips and that's it, I can add my own whiskey all over again and let it age? So the chips stay in the barrel, righ? , you don't take them out After every use?
Hi George,Another great informative video, had never really thought about dismantling my barrels to re-char them. The avenue I went down here was to season my barrels with off the shelf sherry, usually charging them up November time so there's plenty of sherry over the festive period to keep Granny well oiled. Then once the sherry is done, fill barrel with a 40% shine to pull an authentic sherry cask finish, seems to be working none too bad. Keep up the good work>
That sounds great. I know it must be very pleasing when ready.
George
Well Done! Your presentation is very engaging!
To Barley and Hops Brewing LLC,
Wonderful and imformative video's, this one especially. Even the posters, whom have my thanks, have lended to some techniques I've been wondering about in the pursuit of the creation of a whiskey flavor that I'm trying to recreate independently as I've heard that the flavor exists. Last summer I tasted a Smokey Maple Bourbon made by a local brewer(who refuses to share their process). Now since I've tried to find them to buy more... to no avail, my next option was to search for a competitive flavor...not happening. What I tasted was a micro batch limited to being produced only once a year and limited to no more then 1k bottles(please note that their primary product of choice IS fancy vodkas(which tastes to me more or less like rubbing alcohol). I did try Jim Beam Smoked Maple that more or less tasted like watered down whiskey drown in watered down maple syrup. While I build 2 and 5 liter barrels from sugar maple(yes, currently studying barrel wright skills), I currently think that Fighting Cock Whiskey re-aged in a charred sugar maple barrel, might emulate the flavor I seek. Until then, I'll be terrorizing the local liquer store for all of the The Kraken Black Spiced Rum they can get their mits on.
If I go with the charred chips(or as I plan to make charred sugar maple staves of 1/4x1/4x5 inches temporarily), what is your suggestion for a main container to put the afore mentioned staves in???
Great video. Ordered a 1 L barrel to season with PX sherry to finish cask strength malt scotch. Good to hear they hold a little less than the listed # as whisky comes in .75 L bottles.
I was wondering if after you re-char a barrel could you add a small amount of uncharred chips to replace the chemicals and flavors that have been lost from the barrel staves to previous agings? If so, how much would you use?
Also, If I age a spirit in my barrel, then want to age a beer afterwards, like a porter, stout, or maybe a dunkel, how long would I age the beer in the barrel before kegging or bottling?
Thanks so much for the great videos and all the info!
Your statement at about 4:30 is only partially true. The surface area to volume of liquid contact ratio allows for a more rapid "infusion" of some of the character elements of the wood, but absolutely nothing can replace time for "aging" a spirit. The phenols and saccarides the tree stores as sugars dissolve at different rates in alcohol. Those are the flavoring elements that lead to the subtler tones in the final taste and nothing can replace "time" for that process to occur. One can more rapidly infuse some of the other features like color and tannens in a smaller barrel within weeks, but one should be cautioned to not expect a "mature" spirit flavor profile from a small barrel in a matter of weeks
There's a way to speed up maturing that tastes like the real deal to the layman, large differences in day and night temperatures will force the spirit in and out of the wood much like the natural process, but will age it faster if you heat it during the day and refrigerate it during the night. I have tried this and have to say that you can get a year's worth of aging done in two months at most
Thank you for posting. I am new to the barrels and you have answered my question about the different kinds of charred oak.
I didn't realize until now that I've been to your store. I was stationed at Ft. Hood years ago. I'm pretty sure I have tasted your whiskey also.
I live back in NC and I see that your store, according to Google Maps, is closed permanently. I hope you are doing well, have a good day
Excellent video ! Gave me so much info to keep me going and delivered so well.
It might help to wrap a bungee around the barrel to hold the stays in place.
Reviewing this video again. I completely killed my barrel trying to recharr it. It's a funky flower pot now. George what proof do you fill your barrel at? I did it at 80 and it was wayyy to oaky. I believe next time I'll use 140. You would have pissed yourself watching me try to charr my barrel the thing turned into a bonfire and all the staves opened like a flower. I think a good water rinse before putting fire close to it will be in order for next time.
Your channel is amazing and very informative
Easy barrel displacement measuring.
It is easy to test displacement size. Fill barrel with water. Put barrel in a larger bucket. Fill bucket with water to cover barrel. You may hold barrel under water with a stick. Mark water level in bucket. Remove barrel. Mark water level. Now, taking a known measuring device: cup or jar or? Fill bucket to upper mark. How much water it takes to fill bucket from lower mark to higher mark is the barrel displaced amount. ☺
You are right, there's some websites that wanted to charge 100 dollars for a 2L and that did not even come with the whiskey flavor. there was another company that did come with it, but also with the 2L Barrow. I checked on eBay and I saw a 3L and 5L for around 35 to 40 bucks. And I went to another website that sells the whiskey flavor for about $2.50, a pop and total, I could spent 55 bucks for a 5L and 7 flavors of whiskey. I asked one of the sellers about why are they selling the barrel so high, they said that it can be replaced if one of them doesn't work also they said that they can put your own Name on the barrel but to me that doesint matter. Once you're whiskey tequila or whatever you are trying to age, it's going to go back to glass bottle. So no, thank you. I will not spend a hundred bucks. But half the price I'll get more plus a 5L Barrel. Thank you for the information.
My 2 liter barrels (unvarnished)holds just under 2leters. I filled with warm water and let stand for several days. I stored them inside at 68 degrees for 1 month and outside in my greenhouse from feb through april Michigan weather. Whiskey came out amber in color .tasted pretty good.
So many questions have just been answered. Thank you sir
Thank you for the video post, I learned a lot from watching it and trust your expertise. I liked some other poster's idea's about using a muslin bag for adding flavor during a recharge of the barrel.
Which leads me to offer 1 idea and ask many questions.
I think maybe a cheese cloth tied up with charred wood chips would work also if you added some old used wine bottle cork tops for buoyancy to keep the spigot clear. And when you get to the bottom of the barrel, just put on KC & The Sunshine Band "Shake Your Booty"
Now my questions are these; On using charred wood chips after a barrel has been used 6-times, Would Pecan wood be safe for consumption to get a nutty flavor? Walnuts?
What about adding Cinnamon sticks? or Dried vanilla beans? into the recharged barrel?
I am new here to this topic, so maybe my questions seem strange or out of place, but this is the 1st video I have watched on this topic, so I am a newbie.
All good ideas. You can use any of the items you listed and will be satisfied with the results.
Now it's time to shake that booty LOL
I would not recommend adding corks. While buoyant, they could potentially impart TCA, a type of unfavorable aromatic taint to your spirits. Even with high proof spirits, the alcohol content may not be enough to inhibit the bacteria responsible for producing TCA and the alcohol may in fact increase the extraction rate of TCA already present.
Have you ever used something called “gaffers tape”? Infinitely superior product. No stretch. Doesn’t leave residue. It is a lot more expensive, but it’s about 15-20 usd for a 2”x60’ roll.
Really cool. This video is a knowledge bomb Mr George
Great informative video George! Thanks!
I'd try to introduce those wood chips through the side using a small mesh bag instead of taking the barrel apart. Just use a string to tie the bag to the cork. Just a thought.
I bought 5 1ltr barrels on clearance. I just distilled a sugar wash and got 180 proof shine that is now aging in one.
I have 4 ring 10L barrels and take 3 bands off all but a bottom band. Although i have not rechared my barrels i thinl i will try doing this. All my barrels are American white oak made in Spain by Rodriguez. These where used shortly for flavoring spirits.
I had no intentions of being negative on Barley and hops. Mostly a very informative video.Just a few observations. barrels are made different and some of the cheap barrels WILL make your product look nice however that is all they do. I good quality barrel made with the right wood and will mature your liquor to a fine drink rather than a nice "looking " drink. So like most things in life, cheap simply means cheap.
+Brian K King you are correct. Our barrels are quality barrels and teh staves are thick. I appreciate your comments and thank you for bringing your observations to light.
George
+Barley and Hops
Good to know George, I'll keep you in mind for when I'm in need of a new Barrel.
I use deep south barrels they work great and the service is awesome
Of you've used the barrel to the point of it becoming neutral, as you mentioned, can't you add some of those charred chips into the barrel to get the same natural flavors from the wood and still have a functioning barrel? 🙏🏻🙏🏻
Your the best George, THANK YOU!
I have a 1 liter barrel that was made from a 53 gallon charred barrel that was used once to make bourbon. I'm using it right now to age an inexpensive 1 liter bottle of 3 yo bourbon from Heaven HIll....it was only $11 for the bourbon. After using the barrel just one time I was thinking of enlarging the bung hole to allow me to add medium toasted oak chips. I would then seal the enlarged bung hole with a properly sized wood dowel or a cork from a bottle of whiskey. Of course, I could just pour the whiskey into a jar and add the oak chips, but I want to reuse the oak barrel because it breathes and supposedly enhances the flavor.
Varnish is only a matter of appearance. I have more than a few barrels . I do agree that an expensive barrel is not needed however the only thing a cheap barrel does is impart that nice color, NOT the maturity that comes from a quality built barrel with the right wood. If all your after is appearance then just buy chips at the local brew shop, if you want quality aging then spend the dollars for a quality made barrel. Look at an end shot of a barrel to see the thickness of the staves used.
A very good programme learnt a lot
Thank you, George!
I was thinking about what you said about the recharing, what if you add some of the light woodchips in the barrel, that should give you the vanilla and other tastes that come out of the new barrel i think. the recharred barrel then only works for the collor, but the chips for the taste (sorry if my english is not perfect, but its not my first language)
+Erik Feenstra Would work but I would be worried about clogging up the spigot.
George
+Barley and Hops Maybe drop a suspended muslin sack (have the string tied off somewhere outside the top bung) with crushed char inside the barrel?
+Randall Schoverling That should prevent the spigot from getting clogged.
George
@@BarleyandHopsBrewing It will cut down capacity but adding a few toasted white oak sticks to the barrel before putting the end back on works well.
Hi Clyde here, I enjoyed your video very much. I'm now subscribed to your channel. And I have questions about the dimensions of staves, I really would like to make my own barrels. Looking forward to seeing more videos, and thank you.
Great video! God is good! God bless!
Hi George, thanks for this video. I opened up my 20L barrel this week and charred the inside. Man it smelt so good.
I put duct tape around the bottom ring to hold the ring in place, and I put duct tape where the top ring usually is. This holds the staves in place while you fight the end lid out. I got my wife to help with an extra set of hands. The top tape makes it a little harder to remove the end piece but the security it gives I think was worth it. I could pick the opened barrel up and turn it upside down if i wanted to.
I've started swelling the barrel now. After 24 hours submerged, I have one leak in the stave seam. One of the staves didn't seem to line up correctly with the seam in the end piece when I put it back together.
How long should I attempt swelling that area for before trying some other fix method?
Do you recommend reopening the barrel now that I've swollen it for 24 hours? Half of me thinks if I can reseat that stave better it will fix the leak. The other half is telling me because the staves are already swollen, if I open it now I'm going to 1. Have a hell of a time getting it open and back together and 2. It may makes it leak like a mofo and the staves won't swell together as well as they should.
Any advice is appreciated.
Great video George. Thanks mate!
Thank you for making this video.
Have you tried before charing to dry out the barrel and refill the barrel with vanilla and caramel extract and let it it set for a few weeks then dry out and char the barrel? I find that drying and resaturation of the wood with flavor enhancers like vaniila a few times brings back that flavor and paired with a recharing gets that roasted taste.
another point of the size of the barrel. a part of it is purely marketing... they round the capacity up
My 3 liter barrel was 3300ml or 3.3 liters.
Have an idea for older barrels, can you get some white oak pieces, char em and stick em in the barrel ?
George,
I've watched your distilling videos up thru Barrel Charring. The first one referred to making Rum but as the series continued, you had been calling it Spirit. How do you make the various spirits? Thanks, Mike
I want some of those glasses, lol. What are they called and where can I buy them? (The drinking glasses, lol)
Hello George,
Im in tropical Cairns, Queensland, Australia. I bought a very cheap used and leaking barrel. On smelling it, it seems to have had a red wine or port in it, which i am happy about. After removing silicone sealant and heavy varnish from the barrel and soaking the whole barrel in water, and a few wooden toothpick repairs on it, it doesnt leak. My queston is, allowing its not a charred barrel, and i dont know how many times this barrel has been used and with what, Im wondering if a corn whiskey would go well in it? (the irish and scotts used old sherry barrels to mature a grain spirit-thanks to googling) By the way, I LOVE the wealth of information you impart in your videos. Thanks a lot, George.
Use some permanent steel wool in the bottom of your test tubes ( alcometer ) . That won’t ever break!
Barley and Hops Brewing LLC
Amazing videos and information. I've had a used 3 ltr barrel sitting empty for about a year which I'd like use again for ports. I filled it with water to resoak, let it sit for week. I then emptied, and flushed / rinsed a few times just with water. The risnse water was clear but there was slight efforvesence bubbles at the tail end. From a sanitation point of view, is water sufficient to clean a barrel?
I was thinking the torch inside too but just thought I would call on your experience first to see if there were any other week tricks thanks
Perhaps a rubber band, a bike inner tube cut into a long strip, around the top of the barrel would help when reinserting the top. Like having π r hands helping out. I don't have a bareel so can't test that theory out.
Thanks very large George! So, what are the pro and cons on using chips vs. a small barrel? Thanks again.
Why not char the bottom or top and pieces?! MOre surface area!
Another thought I have is... Why cant some one sell fresh white oak bottom & top end pieces pre char'd as well?
It would give a thoroughly used barrel the opportunity to add oak, tannin, and vanillin flavors.
I would suggest you chuck in some of those Oak Chips while you have the thing open, you're the only one who'll know and it makes a barrel potentially re-usable indefinitely...
1.8 liters is pretty darn close to an actual 2 quarts. My guess is that the barrels were made to English measurements, but when switching to metric the makers just called it "liters".
First off, BEST VIDEOS ON THE WEB (on the subject). Some other folks' videos have some questionable content, but I know (by verifying on occasion with my own research) that I can always trust your info. My question is: How long with spirits "keep" in the barrel? I've got a 10yr old son and one more on the way. I thought it would be a neat idea to fill 3 barrels and age them all until the youngest is of drinking age (21 years and change). Provided the spout isn't jostled while in storage, will I get much evaporation in that amount of time? Also, what effects do light/temp have on aging?
You will lose a small amount over that time (maybe a large amount but that is all dependent o temp and conditions. You could always top-off the barrel every few years to keep it ful. There is no limit of how long you can store them. Anything is possible.
George
it will evaporate in about 90 to 120 days
Not sure if this works, but I read somewhere that the way the big whiskey makers keep some barrels for a decade or more for "special reserve" is to take them out of the open-air (not climate controlled) aging warehouse after an initial aging, then they put them into a climate controlled facility. There is still some loss over time, but it is reduced a lot.
So, keep the barrels in a place that will have relatively stable temperature and humidity year round, and try what George says and top it off as needed every few years, leaving it alone for the last 1-3 years so the maturity is really apparent. Also, I saw a vid of a guy using a heat gun to melt a block of bees wax onto the outside of the barrel to slow down the greedy angels even more.
Last thing I would guess might make a difference is using a larger barrel, 3-5 gallon. Otherwise you may end up with none of the original whiskey remaining by the time your youngest is grown since some is lost each year, then replaced with new spirits.
Good luck!
Rich Morrison pptn
9 I feffefgegmph to be the best way is no width pucior
@@ihf7265 I haven't watched the video you speak of, but when I buy a new pair of sneakers, I get a tealight candle and rub it all over the material sections until they go white and I then hit them with the hairdryer and they become waterproof.
I wonder if you could do the same thing with these barrels, just rub a tealight candle all over them and hit it with a hairdryer to help seal it and give it a shine, rather than varnishing...?
brilliantly presented..good job mate CHEERS !H
Can we put wooden chips inside the barrel for the second time around so as to retain some of the characteristics of a fresh barrel.
Hey George, at what point do you kinda give up on a small leak. And or do you have any good tips on how to fix it.
Questions: can you shave the interior that is charred to rechar again to release deeper tannins; does the process require ethanol to break down essentials into flavor or will pure water also work?
Yes you can but there is a point of diminishing returns. I usually re-char and use my barrel 4-5 times before I toss it out and get a new one.
Hi George!
I distilled 50% corn and 50% barley to about 88% alcohol/176 Proof. I then watered 3 gallons down to 72%/ 144 proof. Now I have 3 gallons of 144%proof aging. My question is how long should it age in a 3 gallon barrel? I know if you do it too long it can give it a strong wet wood taste. To avoid the undesirable wet wood taste I left a higher proof. Any suggestions?
+James Milkavich My opinion is about 6 weeks should result in a quality product. You can leave it longer but make sure you check it regularly to ensure it doesn't over do it (to taste). I normally pre-soak mine in dark oak chips for 24-36 hours before using the barrel. This way I am assured maturation in the shortest time possible and it also allows me to use the barrel more often before it goes neutral.
+Barley and Hops thank you for your reply and your help!
+James Milkavich Anytime
James Milkavich Co
Hello, would you recommend barrelling certain homebrews in these smaller barrel models or does it only work for spirits and wines?
You can verify it. By sticking it in a bucket. And see what it displaces.
No, that would be it's extra wood displacement too, simply fill it and measure what comes out into a measuring jug.
I have a 5 litre barrel, i filled it and left it sit for a couple of months before trying it, fantastic, but i left it in there thinking i would decant it into bottles when i was ready, when i was eventually ready, it was empty... i accused my wife of drinking my rum, and of course she denied, but we both know the angels share isn’t 5 litres, so she must have had the devil’s cut....
Great job, thanks so much for the info. I actually have one of the little ones. I have a question. Would this be a good experiment to create an "infinity" barrel"? Some reason seems like a kool idea but what do I know? Thanks again
Wow, George you must had spent 1/10 of a second with that torch, it was so fast that you cold not have killed one bacteria.
Here is how you recondition a wine barrel:
Wine Barrel - Recondition & Toast by Tony Campanella Jan 25, 2017.
Tried to re-char my 3-liter barrel following these steps, and now I can’t get the hoops back on at all. All the staves have really opened outward. If I had to do it again I wouldn’t have removed as many hoops, or at least put the big ones back on once the end was out, before starting with the torch. Anyone have any good tricks for getting the hoops back on?
Use a ratchet strap and it should pull them back, the coopers use a wire rope wrapped around it drawn right.
What a great video..thanks
Fantastic
Trying to find a video to help me reassemble my barrel. It dried out and came apart completely
Great video! Thanks!
Do you recommend scraping off any of the original char before recharring
What happens if I use a 2L virgin barrel, leave my spirits in it for too long. Say an entire year or 5? Would it then be unpalatable or unsafe at that point?
Great video George, being here in Texas, has anyone tried using charred mesquite wood to age spirits?
I've got a 3 liter and it holds 3.25 liters
Hi George!
Once the tannins and vanillins are depleted, if I were to make my own replacement white oak barrel bottom and top, would that provide enough surface area for tannins and vanillins? Home-making new barrels wouldn't be worth the effort to me, but making new barrel heads would be relativity easy. Would it work to replace the barrel heads after every 5 or 6 uses?
Not sure. Give it a try and let us know how this works out.
You know I've been wondering, why the traditional use for barrels? I mean, what if I built a square box out of white oak and sealed it like a barrel? It should work just as well no? Only because the carpentry in making the curved slats in a barrel is difficult to master. A box however is just a box. It should have the same effect yes? Or....no? In my mind it's just a vessel.
+wingmanalive I am confident that the spirits have no preference on whether it is a square or a circle. I believe that you are correct. This should work and I can see no reason why it wouldn't. Please let me know the outcome.
George
+wingmanalive In the wine and the spirit industry its a lot easier to move barrels then Squares lol. Also they periodically "Take the barrels for a walk" and roll them around to help the aging process . There might also be more surface area inside the barrel then a cube
+wingmanalive Pressure distortion and/or warpage. There is airspace in a liquid-filled barrel and the air expands and contracts with temperature changes. .A flat sided container would separate. Blow into a flat-sided milk jug (or freeze a gallon of milk). The pressure forces the jug into more of a ball shape to equalize the pressure.
cylindrical barrels are can take more pressure without distorting, bowing, or warping compared to a square box. Flat walls of the square box would rupture under pressure easier than would a cylindrical barrel.
RAINNEL MACLANG couldn't you just use something like a zip tie, but metal, to hold the square box together?
I had bad luck with 2 barrels I bought on Amazon. Both leaked after following the manufacturer instructions for sealing. Do you have a reliable source for a 20 liters barrel?
Would the varnish taint the spirit as it breathes?
Can you keep using spent barrel to mellow your shine?
Hi I just have a question regarding the 2Ltr size barrel. I recently picked one up and am currently using it to age whiskey. How many times can an oak barrel be reused???
Are these barrels reusable and washable If yes then how can we wash and what liquids are available for washing them? Please let me know and is charring essential every time after having used them?
Wouldn’t the varnish affect flavor and ability to breathe
No varnish on the inside. The barrel will breath easily.
I don't want to like your videos, but dammit i do. Great info!
I have been looking for information about setting up a solera aging system for rum using 4 to 8 barrels. I can't find anything online; do you have any knowledge about this?
Could they make a synthetic barrel and you just place a piece of white oak into it with every batch?
I 13:00 I would put a tight band on each side before charring.
does it matter what proof it is when you place them in the barrels ? do I cut it with distilled water then put it in the barrel or do I put it directly in the barrel then cut it after it has picked up the wood flavor ?
I tried using woodchips too many times and it tasted like I was sucking on a piece of bark. Not good.
hmm. If surface area contact is what is instrumental in maturation, wouldn't the barrel being on a roller (or tumbler) system expedite the entire process because with each revolution you are exposing new surface contact area? Kind of like how a rotary vap creates new surface area with movement thereby increasing the surface area for exposure to the vacuum.
So more wood coming into contact with more liquid at increased frequency?
you could put the rings over your arm that isnt holding the lid in place and do it with two
you said liter but I think you meant gallon. That big one is certainly more than 10 liters. My barrel is 5 gallon and looks like that second to largest one of your's.
Your percentage is a little off, at least in my case. My "Diablo's Share" (Tequila) after a year in about 30%, not 2 or 3%. I have also found the ABV lowers from 40% to about 36-38%. Overnight? Are you kidding? some barrels take upwards of 3 days to properly swell and seal. And, some of the poorly made barrels never seal at all. In one case, rather then hassle the idiot I bought them from, I just sealed them myself with some external epoxy. Maturation: "Two to three weeks in the two liter" Are you kidding? That would only turn White Dog barely tepid, if at all, even in a new barrel.
Maybe its boiling hot where he is. My moonshine took over two months in a 1ltr barrels in my house in the UK.
Use a large rubber band helps with reassembly
No Varnish! The barrel needs to breathe!
If you don't share with the angels, then the whiskey isn't going to come out as good as it could.
@@jayhutchins6224 i wouldn't varnish it but rubbing some beeswax on the outside would slow the breathing down
B B and H you still read here ? isn't "varnish" and 'staining" like w thompson's water seal, close to same thing? and 2nd, the 'chips" wouldn't be for tequila as well for enchancing taste or color would it ? thank you sir, love the video...still holds up. -Chris
Varnish and thompson's water seal are not the same thing although I am not sure it would hurt anything. Varnish is the industry standard so I've stuck with it.
You can use the chips in tequila as well but it all depends on the flavor profile you are looking for.
George
@@BarleyandHopsBrewing thank you sir. why would anyone re scortch it? does it bring out the flavor possibilities for an old barrel. My small 'cabo wabo sammy hagar barrel " leaks a bit at nozzle...do you do repairs where i could ship it ?-chris