I'm no welder and I have absolutely no intention of becoming a professional at it. But occasionally I have to weld something around the shop. I know a lot of you pros are giving him hell, but for us folks that just need something stuck together from time to time, I find it helpful.
@@LostenFree well if you're in a pinch (I'm assuming would be the case if you're buying your oil from a gas station)a slight variance in viscosity won't hurt anything in the short term. The wrong oil is sometimes better than no oil at all.
Half the people online that shit all-over others attempts have never actually done it themselves. It IS pretty easy to be an expert video watcher after all.
I didn't realize the reason they're using 6013 all the time is because that's all that's available. Welding thick to thin you always put the force of your arc on the thicker piece.
Too much bogus criticism in the comments. These videos are meant for people who have a welder around and want to repair their fence door or whatever they need to do to fix stuff like that. I weld for quite some time, definitely not a pro, but the reason that got me into welding was not the desire to become a professional welder, just fix things, and that interest got me involved more in it. I started with tacks and learnt how to run a bead, use different electrodes, weld on thinner material etc, got proper equipment, and it involved into a hobby. I'm a mechanic and it's the same way if i criticize people who change their oil on their own saying they are are not mechanics, not only it's non sensical but also defeats the whole purpose of the reason they do it, even if it's for cheap or they want to get their hands dirty and get into stuff to learn more.
well said. being able to weld metal together that isnt bearing a lot of weight or peoples lives, even in the most primitive way is a huge step up from duct tape and bolts and nuts. a hell of a lot of stuff wouldnt be thrown in the trash if peopel just knew how to tack weld to fix metal DIY.
There's a difference in doing it wrong, and trying to instruct people how to do it wrong. The difference is what is at stake if it fails, could it injure someone or even worse kill someone. That weld is going to break with very little stress, would you put your kids under something like that.
Sad thing is, half of them won't even be welders. They'll just talk it up because they've watched some videos or it's not how they saw their uncle once do it
Company buys $15k in equipment, gives them a supervisor, and slides them a paycheck based on their hours, and they think they should be on national television
As a certified structural steel welder I can tell you the only opinion that matters is my 100% continuous inspection guy looking over my shoulder all day.
Fit and function. While not the strongest weld. Definitely inclusions with starting and stopping. But it should be fine for its purposes. Most welders think ever weld needs to be as strong as possible. Not as storng as is needed
@CatharticSense it has more to do with availability of tools and material. A TIG weld would be the strongest. Mig weld would work well too. But it doesn't seem he has access to all of that. This should work fine for it's pourpose.
Суть в том, что в данном случая не надо варить без отрыва, ибо тонкий металл перегревается и прогорает. Электрод надо отрывать, чтобы дать тонкому металлу немного остыть.
They dont teach there thin metal welding... all is thick piping and rootpass... thas why these rootpass boys cant weld in househokd settings because household settings mostly use thine metals....😁😄😄
Wish you people always shitting on other peoples work would actually verbalize your superior knowledge and explain what was done incorrectly and what could be done better. I’m certain you didn’t as well all the other keyboard tradesmen didn’t learn the trade by having someone stand over your shoulder and say your work is shit, you were taught and showed how to do it properly.
Wish you people always shitting on other peoples work would actually verbalize your superior knowledge and explain what was done incorrectly and what could be done better. I’m certain you didn’t as well all the other keyboard tradesmen didn’t learn the trade by having someone stand over your shoulder and say your work is shit, you were taught and showed how to do it properly.
Parabéns por repassar o seu conhecimento muitos serralheiros esconde isso dos ajudantes . Que o senhor Deus continue abençoando o seu canal no TH-cam. Não tive essa oportunidade quando comecei a maioria dos serralheiros tudo egoísta.
I've lost count of how many welding videos I've watched designed to teach others how to weld properly. Almost all of them forget to show the basics of the art. Making sure the metal is clean from rust, paint, dirt etc.
Usually this is why you use a stick it doesn't matter how clean but mig is different it needs to be clean ,so if u are fixing a old PC of equipment use stick if your doing something new or needs to look real good use mig
Привет, я тоже сварщик. Для видео в обучалке делай окончание шва. Пару точек или задержку в конце, а то плохому научишь. Надеюсь что не воспримешь меня как хейтера.
Isso mesmo solda com perfeição.. Parabéns. Vou lhe mandar UM FELIZ NATAL E UM PRÓSPERO ANO NOVO A VOCÊ E FAMÍLIA EM NOME DO SENHOR JESUS CRISTO AMÉM 🙏🥰. DEUS ABENÇOE GRANDEMENTE AMÉM 🙏🥰. FELIZ NATAL.
Сварщик. Варит. А. Не Пояет. А. Паспортист. Это. Ювелир. Может. По зеркалу. Варить. А. Что Показали это. Баловство. Только. Для. Себя. Я. Слесарь. По. Трубопроводу. Был Учеником. И. Знаю. Кто. Такие. Паспортисты. 🎉🎉🎉🎉🎉🎉🎉
No soy un profecional, pero practicando he llegado a defenderme en la materia lo y he logrado fabricarme tres tipos de bicicletas de tres ruedas dos para oies y una de mano que son muy fitografiadas en mi ciudad Posadas Misiones Argentina
Тонкий металл хорошо варить прямой полярностью этот шов Я бы заварил в один пароход я не профессионал Просто приходится самому для себя кое-что делать обратная полярность варю толстый металл там где плавится электрод меньше а металл плавится больше
Eu aprendi a fazer alguns serviços de solda elétrica! Fui aperfeiçoando e hoje consigo fazer solda em lata de escape sem problema algum muito útil esse vídeo para quem é iniciante 🔰😅
Неправильно вас учили. Ведение электрода углом вперед или назад - это способы влиять на температуру сварочной ванны в зоне сварного шва. К тому же сам электрод легче вести углом, когда он касается обмазкой детали.
I sucked at sports, so @13 I worked in a garage turning wrenches. But that was 40 years ago. One thing I never could do was stick weld? Gas weld ,braze and Tig and mig. I always had a hard time getting started cause the glass was dark. Someday I'll try again
Se puede hacer un cordón de inicio sin romper el tubo solo se recarga más el electrodo en el material más grueso que en este caso del video es una varilla lisa
hola colega permítame decirle con ese amperaje un novato no creo que lo pueda hacer creo que si lo bajas a 80 o 75 y sacando material desde el más grueso si lo podría hacer
The Internet has convinced me that there is no proper way to weld anything ever. There's always several people in the comments saying that what ever was done is the wrong way to do it.
Второй шов делать не надо. Конструкция, если сделать второй шов, крепче не будет. Тонкий металл всё равно не выдержит большую нагрузку. Высота катета сварного шва должна быть равна наименьшей толщине свариваемого металла.
Сколько людей- столько мнений.Но- есть- правильные,умные,есть- ошибочные и глупые.Учиться- никогда не поздно.Но- ум приложить- вреда не будет.Жаль- прошли времена когда работников просили что- то придумать,улучшить,было НТО,рационализаторы и т.д.
I've been in this industry for over 60 years. I've met with a living heir of John Weld himself. Your work is not galvanized nor combobulated, your bevel isn't chamfered, and your steel isn't compounded. That will not hold
Ele mostrou que é possível, se vc não dá conta, treine mais, impossível não é, o vídeo prova isso, não seja um incompetente falastrão que fica colocando defeito no trabalho dos outros cara, isso é coisa de mulher
@@Kratek-cy4mr3ev1s у меня то есть и не один, и аргон есть, тыкать в жопу пальцем будешь умник, только простому дачнику что полуавтомат брать что бы два раза в год профильки поварить? Балон таскать и вечно заряжать? Потому что с.ка они все травят с крана вечно..Только не пиши про флюсовую проволоку, без газа, говно лютое, а нормальная стоит как полувтомат без газа... так о чем ты ?
Why is everything on TH-cam a spot weld though? There's a reason they say spot welding isn't very trustworthy.. even if your just trying to stick two pieces of junk metal togeather in your backyard, you should want it to be a safe and trustworthy hold right? :j
I'm no welder and I have absolutely no intention of becoming a professional at it. But occasionally I have to weld something around the shop. I know a lot of you pros are giving him hell, but for us folks that just need something stuck together from time to time, I find it helpful.
Все мы учимся и познаем.
Spot on. I think they're full of shit. If theyre so clever, why not pist a video of how they think it should be done?
Good point, when they don’t have the right oil for my car at the gas station I just buy whatever they have
@@LostenFree well if you're in a pinch (I'm assuming would be the case if you're buying your oil from a gas station)a slight variance in viscosity won't hurt anything in the short term. The wrong oil is sometimes better than no oil at all.
Half the people online that shit all-over others attempts have never actually done it themselves. It IS pretty easy to be an expert video watcher after all.
Автор,самая хитрая хитрость для тебя персонально:варится всегда с толстого на тонкое.
I didn't realize the reason they're using 6013 all the time is because that's all that's available. Welding thick to thin you always put the force of your arc on the thicker piece.
Always
Yes sir
Paswe
ماهو قانون اللحاام / المعادلة
Without start/stopping a million times to make a single weld.
Досмотрел до конца. Сижу жду когда зрение вернётся 🥴
Дык в сварочной маске нужно смотреть-то.
Эх молодёжь, всему вас учить надо.
@@user-bv3xd8cj3d 🤣🤣🤣👍 тупанул че-то я
Too much bogus criticism in the comments. These videos are meant for people who have a welder around and want to repair their fence door or whatever they need to do to fix stuff like that. I weld for quite some time, definitely not a pro, but the reason that got me into welding was not the desire to become a professional welder, just fix things, and that interest got me involved more in it. I started with tacks and learnt how to run a bead, use different electrodes, weld on thinner material etc, got proper equipment, and it involved into a hobby.
I'm a mechanic and it's the same way if i criticize people who change their oil on their own saying they are are not mechanics, not only it's non sensical but also defeats the whole purpose of the reason they do it, even if it's for cheap or they want to get their hands dirty and get into stuff to learn more.
well said. being able to weld metal together that isnt bearing a lot of weight or peoples lives, even in the most primitive way is a huge step up from duct tape and bolts and nuts. a hell of a lot of stuff wouldnt be thrown in the trash if peopel just knew how to tack weld to fix metal DIY.
Amen brother
Well said!
There's a difference in doing it wrong, and trying to instruct people how to do it wrong. The difference is what is at stake if it fails, could it injure someone or even worse kill someone. That weld is going to break with very little stress, would you put your kids under something like that.
Noice.
Я шлак никогда не отбиваю, так крепче, а если ещё проволкой обмотать по кругу то вообще на века 😊
Приветствую Вас, коллега !!!
И намертво склеить скотчем!
@@msattey5650 спасибо за совет! Про скотч я совсем забыл😁
Крякнуть, плюнуть и надёжно склеить скотчем.
Никто не вспомнил про синюю изоленту. Слабаки)
Slag inclusions have entered the chat.
Yup 👍
Just a smidge😂😂😂
Welders ... I don't think i've ever seen or heard of welders agreeing how something should be done. Picking on eachother like hens.
exactly, everyone acts better than the other, 🙄
Sad thing is, half of them won't even be welders. They'll just talk it up because they've watched some videos or it's not how they saw their uncle once do it
I mean, are there that much welders out there? I've never met one in my life
Company buys $15k in equipment, gives them a supervisor, and slides them a paycheck based on their hours, and they think they should be on national television
As a certified structural steel welder I can tell you the only opinion that matters is my 100% continuous inspection guy looking over my shoulder all day.
Fit and function. While not the strongest weld. Definitely inclusions with starting and stopping. But it should be fine for its purposes. Most welders think ever weld needs to be as strong as possible. Not as storng as is needed
So it's just an inferior method? Or is it faster than doing the stronger binding methods?
@CatharticSense it has more to do with availability of tools and material. A TIG weld would be the strongest. Mig weld would work well too. But it doesn't seem he has access to all of that. This should work fine for it's pourpose.
In this case the light duty metal is way lighter than the weld
Tampoco es para sujetar un puente por el que pasan camiones!!! Así y todo esos puentes hechos por profesionales tambien se caen ...no critiquen
Я один не понимаю, в чём хитрость то? В том, что он нормально в один проход и без отрыва не может пройти шов или в чём?😂
не пязди!!!
В том, что зажигать и 2/3 ванны держать на толстом и 1/3 на тонком.
Con el amperaje adecuado y cargando la soldadura más en el metal más macizo Claro que se puede
Тоже не в понятках!!! Анонс - просто замануха.
Суть в том, что в данном случая не надо варить без отрыва, ибо тонкий металл перегревается и прогорает. Электрод надо отрывать, чтобы дать тонкому металлу немного остыть.
There's nothing wrong with some constructive criticism. Some people need to go to welding school. If he has been, then they should fire the teacher.
Lol
They dont teach there thin metal welding... all is thick piping and rootpass... thas why these rootpass boys cant weld in househokd settings because household settings mostly use thine metals....😁😄😄
What is the right way? Im just curious
Bullshit a stringer is way better than slag inclusion and weak tacks!
Wish you people always shitting on other peoples work would actually verbalize your superior knowledge and explain what was done incorrectly and what could be done better. I’m certain you didn’t as well all the other keyboard tradesmen didn’t learn the trade by having someone stand over your shoulder and say your work is shit, you were taught and showed how to do it properly.
Glad I grew up learning how to weld in a welding shop instead of learning the wrong way on TH-cam
Muestra el lado correcto
Wish you people always shitting on other peoples work would actually verbalize your superior knowledge and explain what was done incorrectly and what could be done better. I’m certain you didn’t as well all the other keyboard tradesmen didn’t learn the trade by having someone stand over your shoulder and say your work is shit, you were taught and showed how to do it properly.
@@2tipsy4you86 That knowledge comes at a price. Only a fool would give it away for free!
I dont think you noticed but this entire channel seems to be a troll channel that does bad welds on purpose.. or at least i hope so
Wish you would keep your comments to your trade buddies than to everyone on TH-cam.
Parabéns por repassar o seu conhecimento muitos serralheiros esconde isso dos ajudantes . Que o senhor Deus continue abençoando o seu canal no TH-cam. Não tive essa oportunidade quando comecei a maioria dos serralheiros tudo egoísta.
Thats one of the more nicer welds I've seen on shorts
Gracias carnalito...por ese consejo.....yo la estaba cagando cuando soldaba....un saludo desde.... MÉXICO
Первый шов соответствует достойной зарплате😂
I've lost count of how many welding videos I've watched designed to teach others how to weld properly. Almost all of them forget to show the basics of the art. Making sure the metal is clean from rust, paint, dirt etc.
Usually this is why you use a stick it doesn't matter how clean but mig is different it needs to be clean ,so if u are fixing a old PC of equipment use stick if your doing something new or needs to look real good use mig
Exacto!!🙌🏼 este es el video que he buscado mucho 🤩
Gracias gracias por compartir 🏁
Привет, я тоже сварщик. Для видео в обучалке делай окончание шва. Пару точек или задержку в конце, а то плохому научишь. Надеюсь что не воспримешь меня как хейтера.
Автору пох на твой комментарий.
Isso mesmo solda com perfeição..
Parabéns. Vou lhe mandar UM FELIZ NATAL E UM PRÓSPERO ANO NOVO A VOCÊ E FAMÍLIA EM NOME DO SENHOR JESUS CRISTO AMÉM 🙏🥰.
DEUS ABENÇOE GRANDEMENTE AMÉM 🙏🥰.
FELIZ NATAL.
Do I need to wear welding glasses while watching these videos ??
If your not joking, no you dont need to wear them
@@yoitsvenus616 thanks for opening my eyes
@@309atul 😂😂😂😂
safety first!!!!
yes always😎
Isso é que eu chamo de uma obra de arte!! que perfeição!!
A cuanto amperaje es la primera vez que lo soldas?
Excelente video para aprender a soldar gracias
Пайка и сварка - это совершенно разные процессы.
Сварщик. Варит. А. Не
Пояет. А. Паспортист. Это. Ювелир. Может. По зеркалу. Варить. А. Что
Показали это. Баловство. Только. Для. Себя. Я. Слесарь. По. Трубопроводу. Был
Учеником. И. Знаю. Кто. Такие. Паспортисты. 🎉🎉🎉🎉🎉🎉🎉
Нужно смотреть на толщину металла в данном случае катет шва должен быть не таким большим,можно было на первом шве остановиться
No soy un profecional, pero practicando he llegado a defenderme en la materia lo y he logrado fabricarme tres tipos de bicicletas de tres ruedas dos para oies y una de mano que son muy fitografiadas en mi ciudad Posadas Misiones Argentina
Тонкий металл хорошо варить прямой полярностью этот шов Я бы заварил в один пароход я не профессионал Просто приходится самому для себя кое-что делать обратная полярность варю толстый металл там где плавится электрод меньше а металл плавится больше
Как раз всё на оборот
Я, так понимаю, это, показывает, как нужно варить, но в практике, я не встречал таких бестолковых соединений.😂
Eu aprendi a fazer alguns serviços de solda elétrica! Fui aperfeiçoando e hoje consigo fazer solda em lata de escape sem problema algum muito útil esse vídeo para quem é iniciante 🔰😅
Какие то не понятные соединения, для чего видео, тоже не понятно 😂
Когда "непонятные" начнешь писать СЛИТНО, так сразу начнёшь понимать.
@@serge_msv777 не понятно пишется отдельно, учите русский язык. 😡
@@user-fr4ei2eu5rнепонятно мне почему это не понятное видео тебя смущает😂
You Russians are hilarious 😂
@@JRsVsO thanQ🫠
И забыл капнуть последнюю каплю 😂
Как залупой не тряси, капля упадёт в трусы. 😂
Muito obrigado.
Comprei uma maquina desta, e apanhei bastante no começo.
or you use the right rods and the right technique.... or MIG
Y como siempre, los expertos soldadores de computadora diciendo que está mal y opinando que es mejor cordón continuo en materiales delgados
Il y a un truc merveilleux en soudure qui s!appelle la penetration
Не критикую, каждый делает в своём стиле и понимании, но заварил бы разом
Меня вообще удивляет как он с таким опытом прожёг профиль
Метал при сварке надо брать не тонкого метала, а с прутка!
Начинающий,сварщик никому не чего не должен,его учить надо и показывать как делатьэто , а после этого у него практика с теорией.
มือใหม่ ๆ ควรจะปรับไฟ ใช้ เท่าไหร่ ดี ครับ .. 😊😅
We were taught to hold the rod perpendicular to the axis of the weld.
Неправильно вас учили. Ведение электрода углом вперед или назад - это способы влиять на температуру сварочной ванны в зоне сварного шва. К тому же сам электрод легче вести углом, когда он касается обмазкой детали.
Para mirar estos videos debo de usar casco también???
saya welder juga..tapi masih banyak belajar..mohon bimbingan nya
Muy buena esa enseñanza. Para los que están aprendiendo.
I sucked at sports, so @13 I worked in a garage turning wrenches. But that was 40 years ago. One thing I never could do was stick weld? Gas weld ,braze and Tig and mig. I always had a hard time getting started cause the glass was dark. Someday I'll try again
KalAu ngelas yang tipis tabel 0,8 Ampernya di posisi berapa?
Perfecto! Muy bien Gracias saludos
Back in '78, I was taught to drag the slag hammer tip back and forth on the weld, instead of hammering marks into it. Just sayin'.
Que solda bonita!
Yeah but now you have flux inside your weld.
Nossa, to sentindo o cheiro da solda daqui😮
95A is to much juice 75 be about wright then you can weld it thick to thin not dot n dab !
Looked ok to me ....but i dont weld nuclear power stations together like some commenting .
King of stick stitch welding.
Why does everybody use 6013? … because it’s easy to make look good very easy rod to run and isn’t good for anything seriously so it’s cheap
exactly, and weirdly easy even to eruin the weld incarcereting some garbage under it
Mantaaap terimakasih atas ilmunya,,,❤
Complimenti, saldi veramente bene 😊
As a blacksmith and a welder for the past 28 years these are hard to watch this is not how you do it
А как? Подскажи ученику пож-та
А ведь можно ещё и полярность поменять
Зачем ?
I keep learning Thank you :P
แล้วรูทะลุอีกด้านอะ ทำไงครับ😂😂😂
Cuando se escucha ese ruido a viento... perforación segura! 😁
I'm trying to understand why they always tap weld. You should be able to draw consistent lines.
Se puede hacer un cordón de inicio sin romper el tubo solo se recarga más el electrodo en el material más grueso que en este caso del video es una varilla lisa
De acuerdo al tipo de soldadura y a la maquina en uso
Tack weld king right here. Lol
hola colega permítame decirle con ese amperaje un novato no creo que lo pueda hacer creo que si lo bajas a 80 o 75 y sacando material desde el más grueso si lo podría hacer
As a former welder, I can confirm that is not the proper way to weld anything.
Then explain how it's done.
So how would you stick weld a 6013 on thin to thick metal? Gorilla glue?
SOLDADORES ADELANTE - Mi video se llama - Robotizado con CD4017 , NE555 Pilotos
Con esto funciona mucha maquineria solo. Andre
Есть такая функция, убавить ток ,так на будущее 😂
Que buena costura !
lol you have massive undercut on the top of that weld cuz you would rather change your position than turn the heat down further
О! Как он первый раз проварил - я так умею!)
Aula boa!
The Internet has convinced me that there is no proper way to weld anything ever. There's always several people in the comments saying that what ever was done is the wrong way to do it.
Cómo sabes a cuánta potencia poner la máquina? Como aquí, cómo sabes que a 95?
Второй шов делать не надо. Конструкция, если сделать второй шов, крепче не будет. Тонкий металл всё равно не выдержит большую нагрузку.
Высота катета сварного шва должна быть равна наименьшей толщине свариваемого металла.
I do only one pass by doing little circles while sliding through the whole line, but rest every couple centimeters so the material does not overheat.
Com eletrodo E6013 é fácil, quero ver fazer com E7018 😂😂
Сколько людей- столько мнений.Но- есть- правильные,умные,есть- ошибочные и глупые.Учиться- никогда не поздно.Но- ум приложить- вреда не будет.Жаль- прошли времена когда работников просили что- то придумать,улучшить,было НТО,рационализаторы и т.д.
Существуют электроды без шлака?
А я по старинке, полуавтоматом....😏
Very well! Good job!
Thank you! Great tip. Cheers.
Побольше току и ведёшь по пруту. Дуга сама заскочит на профиль
I've been in this industry for over 60 years. I've met with a living heir of John Weld himself. Your work is not galvanized nor combobulated, your bevel isn't chamfered, and your steel isn't compounded. That will not hold
Все всегда показывают но еще ни кто не заварил кратер
Меня тоже это раздражает. Электроды экономят. Роликов много нужно снять, а электрод один на хозяйстве.
Gostaria de aprender a soldar bem assim. Caetité Bahia Brasil
It's not necessary that way. You can weld continuously if you send the arc against the bar... The solid size bar can resist the arc
Eso no sirve, mejor baja más el amperaje de tu inversor y solda el cordón completo, bendiciones
Ele mostrou que é possível, se vc não dá conta, treine mais, impossível não é, o vídeo prova isso, não seja um incompetente falastrão que fica colocando defeito no trabalho dos outros cara, isso é coisa de mulher
@@NeuriLeeMay I ask....are you a welder?
@@NeuriLee if there is a test bend I would 100% conform that this will break easily
This video is just tacking but not welding
Eso no es truco, se llama saber soldar por eso calientas más el material de los 2 que tiene más masa y no al revés
Сбылась детская мечта - смотреть на сварку и не ослепнуть
Я в темноте смотрю. Зайчики подскочили 😂👌
มาชมการเชื่อมด้วยครับ
такие тонкие профили уже давно варят проволкой на полуавтомате
он у тебя есть?
@@iga00001 🤦
@@Kratek-cy4mr3ev1s что ты умник? Вот от таких мамкиных спецов и подташнивает.
@@iga00001 есть у меня и чё?а ты и дальше тыкай фольгу электродом и мучайся
@@Kratek-cy4mr3ev1s у меня то есть и не один, и аргон есть, тыкать в жопу пальцем будешь умник, только простому дачнику что полуавтомат брать что бы два раза в год профильки поварить? Балон таскать и вечно заряжать? Потому что с.ка они все травят с крана вечно..Только не пиши про флюсовую проволоку, без газа, говно лютое, а нормальная стоит как полувтомат без газа... так о чем ты ?
Чтоб человек осознавал радость полуавтомата😮..
Why is everything on TH-cam a spot weld though? There's a reason they say spot welding isn't very trustworthy.. even if your just trying to stick two pieces of junk metal togeather in your backyard, you should want it to be a safe and trustworthy hold right? :j
What type of welding machine is this? What is its name or the name of the manufacturer? Thank you
Нужная информация из этого видео :
Резать металл электродом нужно числа меньше, сваривать металл числа больше ...
I absolutely despise 6013. Give me 6011!
I like 6010
Once I got past the frustration of being a new blood to welding, i'm starting to like 6010 a lot. @itsjuslife
Why? It's literally all we have here besides some 7013 and then stainless and dissimilar rods.
Outstanding
Very beauty
Что за хитрость?
Better yet, how do you fix it when you make a hole in it?. I'm brand new and I just did that my first time