I daily my ZL1 so im Wondering how this will affect ride quality, it seems like the stock components may also dampen allot too. Definitely let us know how the ride feels!
Yeah this was the last arm you can easily replace not bmr. Think the others I already did will do more. We will see this having a solid pivot point instead of the rubber bushing will help though
Hi James , great channel! I have a question , how much of the wheel hop did all the bmr link take out ? I also have a 2018 ss 1le and it wheel hops like crazy especially in the rain and I’m getting tired of it
Yeah I added more HP with tune headers and flex fuel and had bald tires. Wheel hop was nasty my last race. I haven’t honestly gotten a chance to get on the track and test. Hopefully in two weeks here I will be. But I can already feel a difference driving on the street.
You did the same thing I did.. Your probably gonna have to take them off and put the side where you can put a wrench on it to the inside of the car so you can adjust them, Otherwise I think the tire will be in the way... Also did you put the flat square washers on on the inside, you need to make sure they are in there notch properly to lock in the Bar?
Yeah they were in notch 👌👍. And just found one was backwards. Lol. Alignment guy wasnt very happy buthe got itdone. About to take wheel off and reverse it. Was just that one side
@@OnlinecarshowNet1 I feel your pain..haha.. I did the same thing on the first side then realized it was gonna be an issue.. I have mine at the dealer getting a track alignment today..Gonna pick her up tomorrow. Love your car By the way!! Thanks for the cool vids!! Im at jafro307 on insta..
I've heard that from many people and had the question again and again. I never heard any popping or noises at all. I did use grease on all moving parts when installing. Maybe that helped not sure.
@@OnlinecarshowNet1 i got it, the problem was this car must of had its right side hit. It look different. The bolt was a 16mm and the upper mount was bend in. Anyway the washer goes on the outside. Thanks
I Have a 2010 SS Supercharged out in Baytown TX. Should i buy the drag suspension package from BMR or should i get the individual pieces like you did. If individual what pieces do you reccomend i get?
They didn’t have a package when I bought mine so not sure. It did not a huge improvement. I did t do any of the diff stuff either which is where I heard you get the greatest improvement.
I've heard of people getting popping but I never got it once. Maybe it was the extra grease I put on ball at install I don't know. But I've heard of that but didn't experience it.
I am personally not at all satisfied with the quality. They are loud, you can hear them when they move. And they squeak when the axle gets too warm. Otherwise they are okay in my opinion.
Hopefully have the alignment done by the end of the week and can start feeing results of all the suspension mods...
sweet I need some red suspension parts on my car so far I only have BMR springs
After feeling the difference after the control rods I’m hoping this helps even more
I daily my ZL1 so im Wondering how this will affect ride quality, it seems like the stock components may also dampen allot too. Definitely let us know how the ride feels!
I get my alignments at Firestone. Lifetime 🤷🏼♂️
Yeah something. I do brake check. Cost like 4.99 everytime I go in is all
Very nice. Will def feel a difference in the way she launches...…..It's all in the small things. All that red looking good under there as well
Yeah this was the last arm you can easily replace not bmr. Think the others I already did will do more. We will see this having a solid pivot point instead of the rubber bushing will help though
Another great video James 👌🏽 very helpful
carpet mane Thank you my friend.
Hi James , great channel! I have a question , how much of the wheel hop did all the bmr link take out ? I also have a 2018 ss 1le and it wheel hops like crazy especially in the rain and I’m getting tired of it
Yeah I added more HP with tune headers and flex fuel and had bald tires. Wheel hop was nasty my last race. I haven’t honestly gotten a chance to get on the track and test. Hopefully in two weeks here I will be. But I can already feel a difference driving on the street.
Nice job James
Thank you 🙏
Great Video 👍
Nice thumbnail🔥
Thank you. Yeah noticed my videos with DSLR edited thumbnails do a lot better. Started spending more time and picking good ones...
Great vid i just got new bmr toe links and this was helpful
Thank you. You’ll love them. Had good luck with all the bmr stuff 🤙🤙
You did the same thing I did.. Your probably gonna have to take them off and put the side where you can put a wrench on it to the inside of the car so you can adjust them, Otherwise I think the tire will be in the way... Also did you put the flat square washers on on the inside, you need to make sure they are in there notch properly to lock in the Bar?
Yeah they were in notch 👌👍. And just found one was backwards. Lol. Alignment guy wasnt very happy buthe got itdone. About to take wheel off and reverse it. Was just that one side
@@OnlinecarshowNet1 I feel your pain..haha.. I did the same thing on the first side then realized it was gonna be an issue.. I have mine at the dealer getting a track alignment today..Gonna pick her up tomorrow. Love your car By the way!! Thanks for the cool vids!! Im at jafro307 on insta..
Cool I’ll hit you up👍
Your videos are very good.
Thanks man. I try to learn a little at a time and just keep adding to it. Appreciate the feedback and the compliment 🙏🙏😀
The BMR bolts look like grade 3 or 5.
Is the toe rod the same as tire rod
Thanks for the videos, good work, been meaning to ask you where u get the 1LE bumper badges, and have u think on putting one in the front grill?
Did you reuse the nuts mine won’t thread all the way down
Do these make any noise over bumps? Any rattles or clanks?
I've heard that from many people and had the question again and again. I never heard any popping or noises at all. I did use grease on all moving parts when installing. Maybe that helped not sure.
Hi, what were those little square pieces you pulled out with the bolts for?
I think you mean the washers. Just put them back same way
@@OnlinecarshowNet1 i got it, the problem was this car must of had its right side hit. It look different. The bolt was a 16mm and the upper mount was bend in. Anyway the washer goes on the outside. Thanks
I Have a 2010 SS Supercharged out in Baytown TX. Should i buy the drag suspension package from BMR or should i get the individual pieces like you did. If individual what pieces do you reccomend i get?
They didn’t have a package when I bought mine so not sure. It did not a huge improvement. I did t do any of the diff stuff either which is where I heard you get the greatest improvement.
Did you get any toe rod noise
I've heard of people getting popping but I never got it once. Maybe it was the extra grease I put on ball at install I don't know. But I've heard of that but didn't experience it.
video starts at 7:30 😐
I am personally not at all satisfied with the quality. They are loud, you can hear them when they move. And they squeak when the axle gets too warm. Otherwise they are okay in my opinion.
Stop the music it’s annoying.
Sorry this was a while back. Hope I’ve improved since. And been revamping music titles lately. I’ll continue to do so... 🙏👌
They suck and very noisy and BMR customer service doesn’t care part number TR004 they basically told me to kick rocks.
What was noisy? Never had that issue and there service was great back then. Not sure today. Seems like everyone has gone to shit