Heng Long Tiger 1 RC Tank - Track Removal Tutorial
ฝัง
- เผยแพร่เมื่อ 16 เม.ย. 2014
- Hello everyone,
Here is a quick video showing you how to remove the tracks on your Heng long rc tanks
Any questions please feel to ask
If you liked the video please give it a thumbs up and subscribe for more - แนวปฏิบัติและการใช้ชีวิต
Six years later and the video was still helpful to me!
Much appreciated
Nine years later and this video is STILL helpful! Thanks for sharing,
Glad it was helpful!
Thank you! The tracks on mine were coming off, and i couldnt snap them back in. Then i did this, and it worked!
9 years later and it helped me too. Great job thanks kindly.
Glad it helped!
Nine years later and the video was still helpful to me!
Awesome
Thanks! Ever since the tracks on my tank got super muddy I wanted to remove and clean them
Your tutorials are great man hope you do more tank vids in the future Salute RC Tanks & Trucks 24/7
+Gullysquad thanks brother. Yeah hopefully more videos regarding rc tanks coming in the near future
Awesome vid Steve! It was very informative!
Thanks buddy :) glad you liked it
Thanks for the video. I have my first two tanks and I'm finding that on my panzer 3 I keep derailing the treads. They seem pretty loose and have been trying to figure out a way to tighten them. Any suggestions?
thanks, for share that what I need!
I've always just taken the drive wheel off. HL track pine are hard to get out sometimes.
Not sure if yourstill into these, but do you know how i could get a rusted pin out? Im kinda not wanting to destroy the track but at the same ti e im willing to break it if their is no other option.
very helpful thanks
Thanks, glad to hear that you liked it
Thank you now I won’t screw up when I install my steel tracks.
+gerald ross no problem
I like your video
Thanks
For me it was much easier to remove the drive wheel. I banged on the pin a lot, but it didn't budge. So I pried of the hub cap thing on the drive wheel and unscrewed it. Then a bit of gentle tugging made the track come off.
Do you know how to remove the steel tracks on the rc T-90 tank?
Hi, can I make a video request on how to open a HL Panther...
Thank you !!
+Col. RAPR you're welcome
Love my new Tank
Awesome
Good video, I would like to see a lesson on cutting out the plastic hatches and replacing with metal upgrades on various tanks!
Ericusmaximuscifi Thanks, glad you liked it. I need to give that a go, haven't cut out plastic hatches before.
RC Tanks 24/7 Exactly mate , i went and bought all the hatch upgrades for a Tiger I and Kpfw IV and then bottled it. I have no experience at all and i have scoured youtube looking for relevant videos without luck. I dont want to cock up an expensive tank because of inexperience so i would welcome anythinf along those lines.
Ericusmaximuscifi I have seen a technique where by you use cotton or string and cut with that. Using a back and forth motion eventually cuts through the plastic. You just need a pilot hole
Awesome German Tiger 1 but not crazy about the battery compartment cant wait to upgrade to the hatch charging port
Thanks for watching
hi bro. nice video. so my RC tank was running smoothly for an hour. later on one side of its track tyres are not working or moving for my remote control fwd/bkwd/sidewd/ commands whats the possible solution? only the other side track tyres are operational thats it. please respond thanks
Check that the cable that control that side track is plugged into the control board
The screw in one of the front wheels is stripped so the wheel keeps falling out.
damn my tracks are saggy as hell and i still need to remove them. Im thinking of makeing a spring loaded idler. to tension track.
do you have a video buddy that can tell me how to take the Sprockets off? thanks
Sorry I don't but it is super easy. Just get a small flat screwdriver and pry the centre plastic cap off. There is a screw underneath.
I don’t understand I did it to once and it worked then tried it a second time and it didn’t work, until I took a watch makers tool and forced one the pins out, guessing that they must’ve been really dirty, now I’m going to let them sit in warm soapy water, hopefully it fixes that problem
Hope you fix the problem mate 👍
One of the links on one of the plastic caterpiller tracks on my Heng-Long Tiger 1 has broken. Can I replace both the plastic tracks with metal tracks?
Yeah absolutely but the metal tracks will damage the plastic drive sprockets
@@RCTanksTrucks247 Oh. I bought the tank about 20 years ago but never used it. Now my grandson wants to play with it. So I bought a new battery and got it going but as soon as it went on some grass, one of the plastic tracks snapped. I'd like to fix it so my grandson can play with it. Should I just get a new pair of plastic tracks?
Thank you for your help.
Do you have one for the heng long leopard 2 with steel tracks and how to remove them? As I need to drop a few links
Probably be pretty much the same method as the plastic one's. 😈
You do not need to split the tracks, the front sprocket can be removed with the track on it and slipped off the rear sprocket
cool
KevinMillard68 thanks
RC Tanks 24/7 your welcome
Oh yah Im going to upgrade a fill port for Oil spout as well
💪
Can you advice me how to remove, plastic road wheels from the Tiger, many thanks. Robb
+Robert Edwards there is a center cap that needs to be removed. This covers the screw that holds the wheel onto the suspension arm.
Many thanks
Does the motor on this tank hold up to the metal tracks?
+Murray Lochrie yeah but only indoor driving. Outside it will just chew the gears.
Thought so. cheers
GREAT VIDEO ON HOW TO REMOVE THE TRACKS ON HENG LONG TIGER 1
TANK.👍👍👍👍👍
NOW...MY. FRIEND.
CAN YOU MAKE A VIDEO SHOWING HOW. TO. AJUST. THE TRASCING SPEED. TO MAKE OUR. HENG LONG TANKS. TO TRACK
STRAIGHT WHEN MOVING FORWARD..
BECAUSE MY ABRAMS TANK KEEPS. CURVING TO THE RIGHT. WHEN I WANT IT TO ROOL STRAIGHT FORWARD...?????
DESPERATELY NEED TO KNOW HOW TO FIX THIS PROBLEM..
THIS US MARINE WILL BE WAITING FOR YOUR RESPONSE..👍👍👍And I. Am a new subscriber to your channel..
It is the steering trim on the controller. Very easy.
My drive wheel on the left side does not want to stay on, what should I do?
+Juventino Manzano is the screw still attached?
"So just pick a hole" that's what she said
+lawrence coates :)
I would like to know how to remove the front of the Tank Tracks and bar on the Tank
Sorry, I don't have this any more
It's Ok 👍 I found out how to do it
Can you do a video on how to add the smoke oil????? Help!!!
Jordan Thome sorry I don't have a smoke unit.
One of my drive wheels is stuck won't move, but everything else works I have no model repair shops within 15 miles
Have you tried to open it up to look inside? It could be any number of things wrong with it. Something could be jamming the wheel externally or maybe the gears have got stuck or the motors had it. Only thing that I can suggest is that you open it up and see what is going on with it and go from there. Sorry that I can't be more helpful. 😈
@@darkstardavros hi, I have not opened tank but I do think its an internal problem but it has hardly been used and I'm thinking of selling it regards
@@wulfheremercianwarrior2747 Well unfortunately that's probably the only thing that you could do with it now unless you're willing to open it up. Just a thought though. Have you tried checking to see if there's anything wrapped around the drive wheel? Cos stuff like hair can stop a drive wheel very efficiently. Anyway whatever happens. Good luck with it. 😈👍
Whats wrong with plastic tracks? why are metal better?
Stronger, heavier and gives the tank a more realistic driving experience
RC Tanks 24/7 Oh. i might get my HL T1 soon with a 7.2V 3000mAh battery, but what upgrade(s) would be good?
"Pick any hole" they said,
It will be out they said.
seriously, I tried all of em holes and tried to unpin the pin using one of stock track's pin,they wont come out :c
help please
Haha, it can get frustrating but they do come out. Just make sure that the pin diameter used to push the track pins out is slightly smaller. Also they only go in one way.
YOUR tracks are plastic, mine are metal (I assume removal of mine, are like removal of yours), I saw a video a day or two back where you didn’t need to remove a pin. You had to remove a road wheel.
What if i dont have an existing track pin? Sewing needle? Lol
Yep or small paper clip can do the trick
RC Tanks 24/7
i figured out to use a thumbtack with metal end. :) question= are there ways to buy metal hulls/ turrets (or any body parts) so i dont have to paint my tank?
New video being uploaded now of me driving my Tiger 1 in my house
Damn I'm not having fun taking out pin in mine 😭
It will come out man, just take your time