Case 580, Cummins Engine 3.8L Water Pump Change
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Also you purchased the water pump on Amazon,
amzn.to/3aTTrsW
amzn.to/2Yu1XtK
amzn.to/3aRBHOR
Case 580, Cummins engine water pump change..
this will show you how to change a water pump in a Cummins engine.
Which are used in trucks, and in my case 580 backhoe front loader.
Very easy to do, takes only 5 to 10 minutes to replace the water pump......
My TH-cam Video's
My main TH-cam channel = / @bigdavid1
Live Cow Cam = www.youtube.co....
Live Chicken Cam = / @chickenlivec. .
Very detailed and thanks to your wife of doing a great job with the close up shots.
good video.. nice to see boom lock in place
David, thank you for making this video. I did not know I could buy the pump at the local auto parts store for a lot less than from Case or Cummins.
That's plenty of room compared to my skidsteer. Nice camera work too
Thank you for video
Brother, thanks from Canada! Was just putting a new starter and alt on and wasn't sure as to the routing of the belt.
Will order a water pump on amazon and get that outta the way whilst at it.
Great video, make it look easy for even this non mechanic lefty to get er done!
Great video, thank you.
your wife is a great camera-person!
OK MUY BIEN SR NO MAS NO OLVIDE PONER EL ANTIFREZER
How much for the pomp
Dave
Dave
You have great videos.
FYI changed my fan belt on my 580l and it was not hard. 1. Take
belt off Pulleys and let hang (can be
cut). 2. With a wrench (ratcheting wrench better) remove a nut from the pump coupler. 3. Rotate
the engine to have access to the next bolt.
( Use a barring tool to rotate the engine with a socket wrench. $25 ebay
). Slide coupler forward about 1” and
you will have access to install new belt.
Good luck and thanks for your help.
Mike
DO NOT FORGET TO REMOVE BARRING TOOL BEFORE YOU START
ENGINE!!