Hello, hope I am not being overly imposing on you...but: my 2011 picasso xsara has issues beginning from : need change glowplugs, left car sitting up isle. Needed battery charge, now won't start and nothing from starter except bells and whistles with dash lights flashing. Tried BSI reset ( from TH-cam vid) still no changes. Any ideas? Greatly appreciate any feedback. Thank you again apologies for any inconvenience caused by me.
Hi No worries, If your car battery completely dies need fully charge up first step 1. I know but still fuel enough step 2. If you are starting your car key in your ignition turn but no sound of cranking of engine it can be possible starter motor step 3, make sure you battery is fully charged also check your battery terminal there are tighted no loose. If your car battery completely charged up to 12. 6 or above. before sure your all primary step are followed I said. Is your car petrol or diesel, It can be something else, make your check it properly then. I might be wrong. Thank you
@@kerbsideauto4940 Hello, just say reply. THANKS . Its a diesel. Put code reader back on and it won't connect. Clicking (each click comes with a sound ...beep?) Clicking is in fusebox area under dash near code reader input
Should read " just SAW reply" and yes battery is full charge, fuel lvl high. Nothing from starter...don't believe its getting there. Is there a fuse or relay I can check? As stated the initial problem was bad glowplugs, sat over past 8 months, drained battery. Recharged but all these crazy things now
@@kerbsideauto4940i have the same code, I'm using the FAP app and there is a option the test some actuators, the is a glow plug actuator test and I done it and jt says the actuator/relay works fine. the car starts like a dream without any problems at all, I just get check engine light when the temperature outside its like 5°
@@badrijan9704 hi If you getting same code as my, Then it is possible your car glow bad, make sure test glow before carrying work out on car. Thank you
@@badrijan9704 Sometime same but not relay, glow plug has fault in, To check you have multimeter set on 200 hom, if neg lead on body of engine other red lead on top of Glow plug if there are fitted in car make sure you reading between 00.1 to 00.9 hom should be good glow plug and if obvious reading bad glow plug eg 112hom . I will make video
How did you know relay was problem, what was car issues? I have picasso xsara in need of glowplugs and considering changing relay at same time to avoid problems.
@@darkquintet1047 Hi Thank you for your time and contacting me ( comment). On my vehicle fault was coming on dash board regarding say engine need repair, so I used normal fault coder Reader to find out what wrong, This actual fault found on code fault, code reader on p1352 saying, ( sometimes it can be glow plug, I tested glow plugs but there are in good condition, I really bought this relay from dealer.) after changed glow plug relay fault is gone. Thank you
Hello, hope I am not being overly imposing on you...but: my 2011 picasso xsara has issues beginning from : need change glowplugs, left car sitting up isle. Needed battery charge, now won't start and nothing from starter except bells and whistles with dash lights flashing. Tried BSI reset ( from TH-cam vid) still no changes. Any ideas? Greatly appreciate any feedback. Thank you again apologies for any inconvenience caused by me.
Hi
No worries,
If your car battery completely dies need fully charge up first step 1.
I know but still fuel enough step 2.
If you are starting your car key in your ignition turn but no sound of cranking of engine it can be possible starter motor step 3, make sure you battery is fully charged also check your battery terminal there are tighted no loose.
If your car battery completely charged up to 12. 6 or above.
before sure your all primary step are followed I said.
Is your car petrol or diesel,
It can be something else, make your check it properly then.
I might be wrong.
Thank you
First jump start with another car help from someone (car)
@@kerbsideauto4940 Hello, just say reply. THANKS . Its a diesel. Put code reader back on and it won't connect. Clicking (each click comes with a sound ...beep?) Clicking is in fusebox area under dash near code reader input
Should read " just SAW reply" and yes battery is full charge, fuel lvl high. Nothing from starter...don't believe its getting there. Is there a fuse or relay I can check? As stated the initial problem was bad glowplugs, sat over past 8 months, drained battery. Recharged but all these crazy things now
@@darkquintet1047
Hi
Maybe fuse you have to test each one, with fuse tester.
did that fix the problem ?
Yes It did fix the problem
@@kerbsideauto4940i have the same code, I'm using the FAP app and there is a option the test some actuators, the is a glow plug actuator test and I done it and jt says the actuator/relay works fine. the car starts like a dream without any problems at all, I just get check engine light when the temperature outside its like 5°
@@badrijan9704 hi
If you getting same code as my, Then it is possible your car glow bad, make sure test glow before carrying work out on car.
Thank you
@@kerbsideauto4940 you mean first to check the glow plugs and then the relay ? how to check them ? with polymeter on Ω ?
@@badrijan9704
Sometime same but not relay, glow plug has fault in, To check you have multimeter set on 200 hom, if neg lead on body of engine other red lead on top of Glow plug if there are fitted in car make sure you reading between 00.1 to 00.9 hom should be
good glow plug and if obvious reading bad glow plug eg 112hom . I will make video
What is that relay for?
Hi
Peugeot 308 glow plug relay 12v dc
Thank you
How did you know relay was problem, what was car issues? I have picasso xsara in need of glowplugs and considering changing relay at same time to avoid problems.
This is a Good Clear easy to understand video, with no wating of time! Thank you
@@darkquintet1047
Hi
Thank you for your time and contacting me ( comment).
On my vehicle fault was coming on dash board regarding say engine need repair, so I used normal fault coder Reader to find out what wrong, This actual fault found on code fault, code reader on p1352 saying, ( sometimes it can be glow plug, I tested glow plugs but there are in good condition, I really bought this relay from dealer.) after changed glow plug relay fault is gone.
Thank you
Glow plug relay