If the three cylinder ran at 1/3 the RPM of the one cylinder, then the efficiency of 3 cylinders would be equal to one cylinder however you would be able to measure the improved efficiency of using three cylinders instead of a single cylinder from the difference of the three cylinder RPM verses that of 1/3 of the single cylinder
Dude if someone just made four of the second one and attach all the air ways to one at the middle you could make a car! (And if you found a way to control the suction you could control the speed and if you reverse suctioned you’d be able to reverse)😳✊😎🏎
Hii I was hoping to make a vacuum engine too, but the problem is i dont know what type of vacuum cleaner i should use or how strong its suction is, maybe tell how strong is the suction of yours?
i made a working prototype of the second engine with another one stacked right under it (180 degree offset connected with chains or gears) which takes the exhaust of the top engine, its great i think you should build one but be sure to change the crankshaft to be 2 studs instead 3 and put it 1 stud higher on the piston's axle as the timg would be messed up!!!
it does matter because you want the vacua e powering all the pistons because if you only power one it will not be able to turn the other two so connecting the hoover to all three it makes more power
@@reesemolloy6109if there’s more suction there’s more power so if all pistons have sickroom they will turn more as there’s more surface area beings sucked
how can the second engine work if there is no valve at all?If you make a piston and put a vaccum above,it wont spin,it will just be pulled on the top and stay,it wont spin😂
@@reesemolloy6109 The piston's angle is so the mechanism could work. It acts like a valve itself. Without the angling, the engine wouldn't work. Remember, it's an engine which doesn't have any valves.
Turn on subtitles for further information!
ok
No thanks
Thanks
I wished this dude talked
Thanks
Can you show us how you made the first one in depth please
Same
This guy got all of the designs from a guy called ”Lelle’s workshop”. He has a tutorial for them on his channel
the most simple lego engine ive ever seen was the 2nd one
Yep
@@SteedAnimations fr man this was 4 months ago i have made alot now
If you want a better seal on your airflow, put a Lego tire on the vacuum.
i am watching this rather than doing my english work i am about to fail the class but this is more important
my guy 💀
😂😂
Priority
W
Fr
i finally found the piston's rod thingy (5x3), and it works really great even when unlubed. thanks
If the three cylinder ran at 1/3 the RPM of the one cylinder, then the efficiency of 3 cylinders would be equal to one cylinder however you would be able to measure the improved efficiency of using three cylinders instead of a single cylinder from the difference of the three cylinder RPM verses that of 1/3 of the single cylinder
Can you make a v12 engine with these pistons please
Can you make a tutorial on the second one, the one vertical cylinder
Dude if someone just made four of the second one and attach all the air ways to one at the middle you could make a car! (And if you found a way to control the suction you could control the speed and if you reverse suctioned you’d be able to reverse)😳✊😎🏎
No need to reverse the suction. Just use a transmission.
@icyyanimations788 reverse direction. DUH
@icyyanimationsI'm talking about the butterfly engine (engine no.2)
Is it possible to make the 3rd engine a 2 stroke engine?
Hii I was hoping to make a vacuum engine too, but the problem is i dont know what type of vacuum cleaner i should use or how strong its suction is, maybe tell how strong is the suction of yours?
use industry type vacuum cleaner
you should use a shop vqcume from Home Depot or Lowes or something
Shop vacs work to
I use a standard house vacuum and it does good, if you wanted to make like a 4 cylinder vacuum engine then you may wanna use a shop vacuum
1:45 it actually needs a small spin to start, just like a real engine, you are doing the work of the starter manually
where can i found lego pieces for doing that type of things?
Great job dude!
It would be better if you used a lego tyre in the vacuum mouth for a better seal. (Tested by myself)
Thanks for the engenes
I am curently building one with a bad valve design so ill use the first engenes valve config
Great video!
Whats the name of the engine at the start?
i made a working prototype of the second engine with another one stacked right under it (180 degree offset connected with chains or gears) which takes the exhaust of the top engine, its great i think you should build one but be sure to change the crankshaft to be 2 studs instead 3 and put it 1 stud higher on the piston's axle as the timg would be messed up!!!
Btw the top piece Dosent matter because all the pistons are attached though the drive shaft it would move it all but it does look cool
it does matter because you want the vacua e powering all the pistons because if you only power one it will not be able to turn the other two so connecting the hoover to all three it makes more power
@@jacksonnnnnn577 but you know all the pistons are connected by the shaft how would it change that
@pixel_macska6141 but there isn’t a explosion it’s not like a real engine
@@reesemolloy6109if there’s more suction there’s more power so if all pistons have sickroom they will turn more as there’s more surface area beings sucked
@@1dK628 yeah I know know I have just swapped to pneumatics they are better and cooler anyway
This man has the most silent vaccuum cleaner ever
Stop at 0:02 for mute or noise lower 🔉🔇
that startup tho😮
Part 2?
why i cant start second one?
Have any air leaks and do you have a big wheel on it
I BUILT ONE!!! This design works for four cylinder as well, it didn’t work for me until I oiled it!
I think if you shorten the stroke of the engine, it will rotate faster.
But it doesnt start, mine doesnt
Where can I find the parts?
I Think you have to add a gauge or throttle lever
2:41 bro caused an earthquake
Hello! This is an awesome video and all, but I’m just curious from who you got the tutorials from?
because every engine you made reminds me a lot of the tutorials ”Lelle’s workshop” made
How It spin without the valves?
I use bosch electric screwdriver and it spins very faast and i now that it defeats the whole purpose of vaccum engines but i dont have vaccum
I built Lego engine, tried to start it but it only ran for 5 seconds
Nice
Please make more vacuum engines
give the pistons skirts so they dont slack in their cylinders
The work with the piston moving like that in the second engine the piston works as a valve
can i edit our vids
great job
(I3 ENGINE) (EGO)
3:29
Perry the platypus
Use lego tire for performance
IS IT A SUPRA
how can the second engine work if there is no valve at all?If you make a piston and put a vaccum above,it wont spin,it will just be pulled on the top and stay,it wont spin😂
Build it yourself and try ;)
@@ManosLC ok,i'll try
look at the 1:16 and 1:29, it's explained in captions, basically the piston tilts when it's at the bottom, acting as a simple valve
@@PolskiKrecikv2 ohhhh ok,thanks bro
Bro you can build a scooter whit vaccum engines
use a rubber tire on the end of the vacuum
give it piston skirts PLEASE
make the first one have oil and a gas petal
i copyed yours and it didnt work due to my vacuum being WAY to powerful
Add carburator bro👍👍
very cooI engine and I built it
1:45 lol
Inline 3
Merci
Firth engine not working
Corrupted mind 😂😂
Wat
tutorial pls
Change the piston to not make it angle it looks so stupid
It's the whole point of the mechanism…
@@ManosLC for like a valve?
@@reesemolloy6109 The piston's angle is so the mechanism could work. It acts like a valve itself. Without the angling, the engine wouldn't work. Remember, it's an engine which doesn't have any valves.
Good old Technics with real bricks, not possible today with this shit pins only bricks!!
Бомжы оценят😅
Does this hurt the fish?
Yes, it hurts the fish in the engines!
I swear to God it's not working, more depth and easier parts cause the to hole 2 pin brick is impossible
Stirling...anyone anyone
100th comment a year later
Неработает😂😂😂😂😂😂