Thank you I try to make this channel fun and deliver a learning experience my goal is to get people Turing wrenches on their bikes I have 28 years of experience and I enjoy sharing on my channel
Thanks for this video! I'm very new at this so this video broke it down great. I am going to attempt to take the carb off my 83 VT500C within the next couple days.
I just remcently got my hands on an 83 and have no idea where these fuel lines and vents and vacuum lines go. If you or anyone else has any info or wouldn't mind helping me with a few things i would greatly appreciate it! I've been watching and re watching your video so much trying to find out where all the fuel lines and hoses go.
Hello, so the black vacuum piston should be loose and out like that? Because I have one that is loose and out in the air intake of the opening, and the other one is stuck. Which one is correct?
I'm about to do this on a shadow 500 i picked up yesterday. Thanks for the upload! That vacuum line... where does it go to? there's no place on my petcock it could attached to... So it's just hanging out
could you spray carb cleaner directly into it or wouldn't that work? My shadow boks in 6th gear but runs fine in every other gear been running some fuel enrichment for carbed engines little purple bottle cost at 13 euro's
I have a vt585 shadow 19000 mi on it good runner but it's starting to hesitate and overdrive gear don't know what's going on I'd like to know if anybody knows what's happening with it
Thank you Kevin Bergeron ! Loved your channel. Can you tell the exact location of the bolts? I’ve tried too many times to remove the seat on my 85 shadow but couldnt do it. One last question :) I need a new air filter for my 85 vt500 shadow. What would you recommend?
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
All done single handed 🏆
Thanks for showing. Much appreciated !
From Dublin Ireland. Thanks for the simple, clear, no ego bullcrap instructions. Love the accent, very easy to listen to.
Thank you I try to make this channel fun and deliver a learning experience my goal is to get people Turing wrenches on their bikes I have 28 years of experience and I enjoy sharing on my channel
Thanks for this video! I'm very new at this so this video broke it down great. I am going to attempt to take the carb off my 83 VT500C within the next couple days.
Awesome if you get stuck let me know
thanks for the video! I really recommend getting some proper screwdrivers for this kind of job, especially those relatively soft screws of a bowl.
Holy heck thank you so much! I couldnt figure my carb out if it wasnt for this video!
Happy to help that's why I make videos
@@2strokeguru do you still have this bike I took my carb out and can not figure out on we're the hoses all go
@@clydeblanks7594 i sold it sorry text me pics of the hoses i might beable to help 6033958097
@@2strokeguru is that you number
@@clydeblanks7594 6033958097
I just remcently got my hands on an 83 and have no idea where these fuel lines and vents and vacuum lines go. If you or anyone else has any info or wouldn't mind helping me with a few things i would greatly appreciate it! I've been watching and re watching your video so much trying to find out where all the fuel lines and hoses go.
I have the manual I will check it tomorrow when I get back
Thanks great video, I like the seat covering, where did you get this seat done?
Thank you it came already done
Hello, so the black vacuum piston should be loose and out like that? Because I have one that is loose and out in the air intake of the opening, and the other one is stuck. Which one is correct?
I wanted to watch a short video but a I had to watch 5 mins of removing an airbox
Very true
I'm about to do this on a shadow 500 i picked up yesterday. Thanks for the upload!
That vacuum line... where does it go to? there's no place on my petcock it could attached to...
So it's just hanging out
Baqca Sanke it goes to the petcock
Baqca Sanke they are great bikes
It's a lot more complicated than tearing down my ke100 though. I can pull that kawa apart blindfolded
My shadow is still sitting under a tarp.
@@baqcasanke buy it off you for parts? XD
@@3100620842 come get it lol
could you spray carb cleaner directly into it or wouldn't that work?
My shadow boks in 6th gear but runs fine in every other gear
been running some fuel enrichment for carbed engines little purple bottle cost at 13 euro's
No because you need to clean the bowl and jets
Having an issue getting the air box back onto the carbs especially the “right” side any suggestions?
use a hair dryer on hi or a heat gun on low to soften the boots aply small amount of lube on the inside of the boot before installing
My first Street bike in 2000
Great bike
I have a vt585 shadow 19000 mi on it good runner but it's starting to hesitate and overdrive gear don't know what's going on I'd like to know if anybody knows what's happening with it
sounds like you might have to drain the carbs at the bottom of the carb bowls there's a drain could be water or debris and i would also replace plugs
How did you remove the seat?
2 bolts 1 on each side
Thank you Kevin Bergeron ! Loved your channel. Can you tell the exact location of the bolts? I’ve tried too many times to remove the seat on my 85 shadow but couldnt do it. One last question :) I need a new air filter for my 85 vt500 shadow. What would you recommend?
@@tahabekmez5072 factory air filter pod filters let water in the engine
@@tahabekmez5072 seat bolts I don't remember its been a while I believe they are located in back of the side covers
Tengo esta misma moto!
Pero no sé cómo hacerle encender
I don't understand sorry
I just bought this for my girlfriend =] I need to clean the carbs so ……
Right here 😂