There's an easier way to set up the network sharing. In the network adapters page in control panel, you can hold control and click on multiple interfaces, then you can right-click on one of the selected ones and press "bridge network" or something like that.
Got some parts and built my own just the other day! My soldering was abysmal, but cheesoid is up and running! Now I need a nice 3D printed case to make him look less like a bomb...
OMG BROOOOOOOOOOOOOOOOOO "Disable the sharing then enable it back"!!!! Ive been looking for solution on how to connect to the interneetttttttt. You earned a sub man!!!
thanks a lot for breaking this down. I struggled with the USB RNDIS port. I had to update drivers on Windows 10 to make it appear in the network pannel. Also, the link to the default config file is broken.
Ok, perhaps having a few beers BEFORE getting to the technical side of things might have saved a lot of time. I misread/didn't read some parts of the instructions. The MOMENT you showed copying the config.toml file into /boot I literally facepalmed. I was downloading and zipping old versions trying to find the missing file...and turning off antivirus/file checker software that gets in the way a lot. Alright, I R DUM DUM. THANKS! haha P.S. been watching your content for a while. I was a bit irritated with my Wifi Pineapples that seem to get irreversible errors while updating/factory reset....and bricking them. Maybe I'll figure that out next. But it was around that time I found your site. I look forward to making some orders in the future!
This is awesome I am building one as we speak. Question on your store do you ship to the US cause your Wi-Fi keylogger pro is pretty inexpensive compared to other Wi-Fi keyloggers with the same capabilities.
Right on man ive been at it for a couple weeks. Yours was the first video i saw and ex[lained perfect. i think my pi's and cards to old. I didnt see buch diffent exept handshake folder. And must of got a short making thin one
Now that we're basically mates... what if when I plug in the PWNGCHI to set up the SSH part into my win10 box - says MANU but no new connection appears in the network settings... then what?
What about creating the pwnagotchi on a raspberry pi 4? They have Wi-Fi that can connect you both 5 and 2.4 ghz. I’m going to do the 4 GB because I’ve heard that the 8 gigabytes has issues. That would be so helpful!!!
problem powershell : The term 'powershell' is not recognized as the name of a cmdlet, function, script file, or oper able program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. At line:1 char:1 + powershell -ExecutionPolicy ByPass -File .\win_connection_share.ps1 - ... + ~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (powershell:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException
So I am trying this right now. Problem is, my Pi isnt showing up as a network adapter. Am I missing something? I'm using a USB Network Stick to get Wifi, could that be a problem? Edit: Finally got it working. Driver wasnt installed automatically. Installed some RNDIS Driver through the Device Manager and it worked
Been running this for days now. Cannot get my e hat to turn on. Every thing seems correct. Thoughts? Today I plugged it into my monitor and it's asking for a password.
cant you just put the raspberry pi zero's card into your computer like you did to flash the card and open the drive that is mounted? so long as it is formatted fat32 or exfat you should be able to read the card directly.
when I try to log into the WebUI, bettercap asking for a username and passwrd, I used changeme without any success. followed your instruction to the T and I cannot access the handshakes it saying no handshakes or directory, even though I did see by accident I enter "LS" command and it shown it had one, but I was never able to repeat that again
@Seytonic He doesn't want to start searching for networks after the start he also stops with the message "AI READY"; and the counter for the operating time doesn't grow what could be the reason for the error?
If you want to add more than one ssid to the deauth whitelist is there a way to do that? Can you just comma and the next one or do you need to add multiple lines for each ssid?
Ok I ran into a problem, posted the issue on the official github page but no response, so basically what happens is that the hid scripts dont work they deploy but never gets completed just keeps on running. I've tried many PCs and using different sd cards and the cable is not the issue because it gives the lan connection but the script just won't run. Yes and also the keyboard is correct. PLS HELP
Same problem. Though I am using an inkyphat display. After flashing and copying the yml file to the boot directory nothing happens when I power it on. The green LED flashes now and then but that's about it. Had it run for over an hour but no progress nor any sign of life. Re-flashed it every time I tried again but no change. Tried both ports with flashes in between.
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 พฤศจิกายน 2567](http://i.ytimg.com/vi/wPd7VFfWHIA/mqdefault.jpg)
I'm the only pwnagotchi from Bosnia, nice. Pretty useful lol.
ima nas jos
Ima bout to be the first in iceland lmao
@@idoabitoftrolling2172 you get yours up and running ?
@@leonardfluhart3532 nah but I’m getting it this Christmas
@@idoabitoftrolling2172 oh okay I got mine up and running but its not storing the handshakes correctly can't find them at all
Me: *Doesn't feed it*
Pwnagotchi: *Kicks me off internet*
Lmao
I've bought a screen for my Zero just to try this!
Same well im going to
monitor you mean or the screen display on raspery pi zero?
@@KFPSplayer a 3.5" tft touch screen to mount on the zero
I’ve been using it without a screen but ordered one just for the emoji/faces😂
Runs on AI huh? Today you feed him WiFi handshakes, tomorrow he will feed on human flesh.
he only wants wifi handshakes
@@ish6719 congratulations
that’s the joke
@@abovescored congrats it's a joke on a joke
@@ish6719 My handshakes bring all the Pis to the yard and they're like, it's better than yours...(music)
Not human flesh.. human error 😅
Please make a complete playlist on this device, this is awsome
Honestly been waiting for this since i saw it on instagram
There's an easier way to set up the network sharing. In the network adapters page in control panel, you can hold control and click on multiple interfaces, then you can right-click on one of the selected ones and press "bridge network" or something like that.
Got some parts and built my own just the other day! My soldering was abysmal, but cheesoid is up and running!
Now I need a nice 3D printed case to make him look less like a bomb...
God I remember tamagotchis
OMG BROOOOOOOOOOOOOOOOOO "Disable the sharing then enable it back"!!!! Ive been looking for solution on how to connect to the interneetttttttt. You earned a sub man!!!
Aww so cute!!! Guess who got a shiny red case for it?
Jeg gætter pa Dorothy eller var det hjemmesko?
@@zigginzag584 @_@
do you?
If the Pwnagotchi with a soldered screen is thin, then that must mean that the Pwnagotchi with just a hat screen, is thicc.
I think (hope) this would work with some i2c oled displays too
bcs thats what I have laying around
well there goes my next weekend
Yes please,more on pwnagotchi I have mine working, this is v helpful cheers jhonti
how to make a plugin for it would be good. and how to use plugins.
fine video :) you forgot talking about pwnagotchi make friends when others pwnagotchi are arounde , pretty fun :)
blurry porn folders
>if you are using Linux, you are clever enough to figure it out yourself 😂😂😂
Glad to be part of the master race!
XD
they have since changed the config.yml to config.toml, here's the updated default configuration directly from their website:
main.name = "pwnagotchi"
main.lang = "en"
main.whitelist = [
"EXAMPLE_NETWORK",
"ANOTHER_EXAMPLE_NETWORK",
"fo:od:ba:be:fo:od",
"fo:od:ba"
]
main.plugins.grid.enabled = true
main.plugins.grid.report = true
main.plugins.grid.exclude = [
"YourHomeNetworkHere"
]
ui.display.enabled = true
ui.display.type = "waveshare_2"
ui.display.color = "black"
Thank you, I’ve been using this guide for the last two days nothing is happening I’ve been going insane!
I build IT few weeks ago, this little thing ist awesome!
Jhonti, this is just awesome! Unfortunately I can’t get all the materials. Keep It up!
Which things can't you get?
Thank you for making a video that was on windows and for making it to the point
Right after I made mine 😂 this would of been nice a week or two ago
That worked great and got me up and running thanks dude! For those wondering this still works fine with the new .toml files
make a video of actually using the handshakes
Hashcat?
Only way to use handhsakes is to have either a 5,000 dollar rig or 5,000 handshakes and hope a few have easy passwords
Tyler Prometheus what $5000 rig? :-) pls
@@zigginzag584 false with a the combiner attack on the password hash it can be done with just a gtx 1060
Sell these on Maltronics!
It's easy to set them up the hardest bit is getting all the parts you need. I definitely need to look into the battery and RTC mods.
What a kitten is to a human, a pawnagotchi is to the Internet.
Nice! What's next, a virtual pet that hacks computers? That would be nice
Flipper Zero is here!
Got my sub for brilliant explanation and for doing on Windows to help the masses :)
Had this plugged in for an hour before I realized I hadn't put the SD card in. XD
Beautiful enjoyed this video man! Keep up the amazing work! 😁
you must have known it was my birthday, thanks for the vid!!!!!
Having so much fun with 1, I'm building a second one.
Solid video, but there have been a bunch of changes since. Sure you could get some mileage out of an update video.
it uses .toml files instead. the instructions are in /etc/pwnagotchi/default.toml
thanks a lot for breaking this down. I struggled with the USB RNDIS port. I had to update drivers on Windows 10 to make it appear in the network pannel. Also, the link to the default config file is broken.
Good job @Seytonic!!!
I keep getting a "no file or directory" response after I try to enter the scr -r command at 8:55
sorry to bump you notifs, but I'm getting this error too. Any update?
edit: I found a solution!
check out: /watch?v=6f7PB3bgaxQ&ab_channel=WiFiTube
I. NEED. IT. IT'S ADORABLE.
Ok, perhaps having a few beers BEFORE getting to the technical side of things might have saved a lot of time. I misread/didn't read some parts of the instructions. The MOMENT you showed copying the config.toml file into /boot I literally facepalmed. I was downloading and zipping old versions trying to find the missing file...and turning off antivirus/file checker software that gets in the way a lot. Alright, I R DUM DUM. THANKS! haha
P.S. been watching your content for a while. I was a bit irritated with my Wifi Pineapples that seem to get irreversible errors while updating/factory reset....and bricking them. Maybe I'll figure that out next. But it was around that time I found your site. I look forward to making some orders in the future!
This is awesome I am building one as we speak. Question on your store do you ship to the US cause your Wi-Fi keylogger pro is pretty inexpensive compared to other Wi-Fi keyloggers with the same capabilities.
Hey man, great video. I just got my parts in the mail (plus 120 maH battery).
What battery did you get
7:26 subtle roast but still hurt my feelings
Still helpfull.4yrs later 👍🏻
hey great video as always. I was wondering if there will be any black Friday deals on your website :D
that will be awesome
You.are.awesome.jhonti!! Love from India
If you want to disturb a WiFi Network just use your mobile and Rename mobile hotspot as Target SSID.
Always love your videos! If your ever in London, I'll get you a drink!
now just need to wait for my parts .
Right on man ive been at it for a couple weeks. Yours was the first video i saw and ex[lained perfect. i think my pi's and cards to old. I didnt see buch diffent exept handshake folder. And must of got a short making thin one
can you please do an updated version with the V3 hat
They are great and all but i can only be impressed by a one that can do evil twin
Great video easily to follow
Good Vid. How about a set up and tut using a 5ghz WiFi adapter with pwnagotchi. 🙏🏼
I was just wondering if you could support 5ghz with external adapter? I think I seen some guy whose device was decoding handshakes?
i followed these directions to a t and all my pi does is get really hot nothing comes on the screen
, help!!!
Perhaps use wireshark on pcap files to analyse?
Now that we're basically mates... what if when I plug in the PWNGCHI to set up the SSH part into my win10 box - says MANU but no new connection appears in the network settings... then what?
getting a permission denied message whenever I attempt to login using the default 'raspberry' password, any help?
raspberrz
username: pi
pasword: raspberry
What about creating the pwnagotchi on a raspberry pi 4? They have Wi-Fi that can connect you both 5 and 2.4 ghz. I’m going to do the 4 GB because I’ve heard that the 8 gigabytes has issues. That would be so helpful!!!
@seytonics that would be great if you could. an thanks AGAIN :)
Why 8.8.8.8 ? I got a new favorite: 1.1.1.1 Cloudflare DNS
Doesn't matter anyway. He's not connecting to any internet websites through that network interface.
Cloudflair needs to burn
@@lucidwolf2000 you're on about DHCP not DNS.
@@samuelmatheson9655 if it burns then its open season for ddosers, and a large majority of the web relies on cloudflare.
Hey. Could you do a video on how to connect to the screen via Bluetooth. Thanks
problem powershell : The term 'powershell' is not recognized as the name of a cmdlet, function, script file, or oper
able program. Check the spelling of the name, or if a path was included, verify that the path is correct and
try again.
At line:1 char:1
+ powershell -ExecutionPolicy ByPass -File .\win_connection_share.ps1 - ...
+ ~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (powershell:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Log story short! What can be used for? Hacking paswords for wifi conection or others?
What are you able to do with the Wifi Handshakes ?
4 years on an your video's are so helpful an very easy to understand. thank you @seytonic
Hello can I run this with a RAPBERRY PI 4 model B and a display only please ?
This is so cool!
Why do all the guides are stopping on basic setup?
Did you check it on war-walking? It doesn't work!
How to connect an external wifi card?
So I am trying this right now. Problem is, my Pi isnt showing up as a network adapter. Am I missing something? I'm using a USB Network Stick to get Wifi, could that be a problem?
Edit: Finally got it working. Driver wasnt installed automatically. Installed some RNDIS Driver through the Device Manager and it worked
Does the Pwnagotchi works on the new Raspberry Pi Zero 2W
Been running this for days now. Cannot get my e hat to turn on. Every thing seems correct. Thoughts?
Today I plugged it into my monitor and it's asking for a password.
That's awesome :)
Hello,
can someone tell me what to set so that my pwnagotchi is throwing people out of the wifi all the time?
Thanks
Why not just shift+right click in the folder you want to run Powershell from? Easier than cd or cd /d?
So what are these handshakes? What we can do with them?
You need a WiFi Handshake to Hack/crack the WiFi Password
you do know what you wrote recreates a copy of handshakes in the handshakes folder over and over again.....right?
Looking for some help. Ordered a waveshare but they have sent me v3 but I don't get any image. What can I do
cant you just put the raspberry pi zero's card into your computer like you did to flash the card and open the drive that is mounted?
so long as it is formatted fat32 or exfat you should be able to read the card directly.
i'm having issues, i flashed the image but when i plug the 0w nothing happens, however when i put another sd in it boots
The Cutest Hacking Tool Yet? :/
*never have i ever, pet a diy hacking tool*
Is there an black friday coupon this year as well?
Do you still recommend Pi 0 W? or would a Pi 3 be better?
it keeps saying connection refused after i try to receive handshakes
im getting an operation is being blocked waiting for an oplock, any ideas?
Can you add a keyboard to the pwnagotchi?
What is the reason you would want wifi handshakes for?
Is there something useful/interesting you could do with these?
Sry, no computer expert here..
Yes, you need the Handshake to Hack a wifi (crack a WiFi Password)
@@fabianb9412 thank you 😊
@@gevanlappido1304 ;)
when I try to log into the WebUI, bettercap asking for a username and passwrd, I used changeme without any success.
followed your instruction to the T and I cannot access the handshakes it saying no handshakes or directory, even though I did see by accident I enter "LS" command and it shown it had one, but I was never able to repeat that again
will it work with zero v2 w?
@Seytonic He doesn't want to start searching for networks after the start he also stops with the message "AI READY"; and the counter for the operating time doesn't grow what could be the reason for the error?
and when I add the line in config. yml with the Bettercap command it doesn't start at all anymore
If you want to add more than one ssid to the deauth whitelist is there a way to do that? Can you just comma and the next one or do you need to add multiple lines for each ssid?
Does the pwnagotchi support a gps module to log the coordinates, whenever AP's have been PWNed?
Yes
I have wareshare1 but it doesnt work the display still empty after 5 minutes. Can I get some help? Thx :)
hey, can you make an updated video on this? It would be greatly appreciated, hell id even cashapp you moolah for it lol
I wonder if it can be somehow "improved" with the "recent developments" in AI systems
Ok I ran into a problem, posted the issue on the official github page but no response, so basically what happens is that the hid scripts dont work they deploy but never gets completed just keeps on running. I've tried many PCs and using different sd cards and the cable is not the issue because it gives the lan connection but the script just won't run. Yes and also the keyboard is correct. PLS HELP
Using 10.0.0.1 as the IP may conflict with many peoples internet connections as many ISP provided and also third party routers use the 10. IP scheme.
I have Xfinity and this is the gateway to the portal. Could I set it to whatever I want or does it have to be 10.0.0.1?????
How did you get the display to work?
ive got the same setup, but it wont display anything on screen(Despite having the config enabled for it)
where is the difference between config.yml and config.toml?
Pwnagotchi documentation says config.toml, I'm confused
Would this still be possible on a Raspberry Pi 4?
Yes, there should be a tutorial on the website.
My e-ink display(waveshare v2) won't show anything after booting. Any ideas on how to troubleshoot?
Same problem. Though I am using an inkyphat display. After flashing and copying the yml file to the boot directory nothing happens when I power it on. The green LED flashes now and then but that's about it. Had it run for over an hour but no progress nor any sign of life. Re-flashed it every time I tried again but no change. Tried both ports with flashes in between.
Have you got a UK source of the e-ink display? I couldn't find the same model in the UK for less than £30. TIA
www.amazon.co.uk/Waveshare-Resolution-Electronic-Controller-Raspberry/dp/B07J3FHJVP/ref=sr_1_fkmr0_1?keywords=Waveshare+V2+2.13inch+e-paper+Hat+E-lnk+Display+SPI+for+Raspberry+Pi+Zero%2FZero+W&qid=1576419458&sr=8-1-fkmr0