Yes, good video. I would just add that if are adding a second remote an already existing and working remote that you include that both will need to be as the same time, because if you only pair one the new remote the other remote will not work.
Dude yessss finally I’ve been struggling tryna fined a video to activate my other remote cuz man it was a hassle trying to fined my remote that worked only thing I need help on is now how to get the sound of the remote
Hello JP, Would it be possible for you to create a video tutorial on programming the Compustar 2-Way Remote for a car with a Push Start button? Thank You!
I have a 2019 Ram 3500 Promaster van with the Compustar system installed. Recently I lost all connectivity and took it back to the shop that installed it. To get it to work they said that they had to remove the battery from my Ram remote that came with the van Have you ever heard of this? They said that deep in the compustar manual it said to do this. Everything worked fine with both remotes for the last year but it just happened. I really liked the original remote to work also.
Hi JP. I recently bought a vehicle with the system installed. This really helped me out. I went to add another remote a week later and it isn't working. Any ideas how to fix it?
I’m trying to program a FTX1400R-AM I just purchased to replace the one that went bad, I have a 2013 Outback and can’t seem to get it into program mode! Any ideas would be great. Thanks Bob
Thank you for Posting the video, my husband installed the CM7200 today, but it is very bad, my car can not start at all now, the original key can be turned, but the car has no response, no lights and no music! Has anyone encountered such a problem /. Please help me! Thank you very much!
Maaaaaan Thanks I didn’t know what was going on with my fob! I have drone mobile on my truck and I had to resort to just using the app from my phone to start and unlock the doors!
Can the new remote be paired without needing the factory key? My dog just ate my key and I’m looking to do this as an alternative and just add remote start too
Question: I have the 4905s system installed in my car. But I want to upgrade the remote to the lcd T13 fob. The remote that came with it (which I use) range is like 3000ft-Will the T13 remote work with the 4905s system? Thanks in advance family! 🫡
My problem is to see how the connection of G15 goes, please make a video on how to install G15 remote start step by step that will really help your viewers
Thanks for the video. I have a 7900AS system. Usually, when I lock my vehicle I get 3 chirps confirmation. However, sometimes it only chirps once. What's going on?
Hey man, i also have a 4th gen ram and just installed the compustar 4900s. The only cable i think i needed to use was the two fused +12v, the ACC, Gnd, from the main heavy gauge wires. and then from the thinner wire blade connector i used CAN hi and CAN Lo, and ignition +, and the parking light mux. That was it. I am waiting on a USB cable to flash the blade so i cant really test it but does the wiring sound right? I think door locks and horn and stuff are supposed to work through CAN but not really sure the diagrams were not very descriptive.
@@jptheinstallguy thanks for the reply. I flashed it but the blade isn't detecting the oem key in the ignition. But i posted my wiring diagram on reddit and they were able to help me. I didn't realize the main ignition wire in the car has to be cut and routed through the remote starts. Once I do that i'm pretty sure it should detect the oem key.
@@jptheinstallguy it is installed and working great. I also had to run the thick gauge ignition wire into the blade ignition wires with a diode as well. But its working good. Thanks for the help
I have a compustar 4905s alarm and remote starter. I lost my keys had a locksmith make two key he delete old keys out computer now remote starter won't work
whats up homie. man i actually like the viper products better than compustar but both have there advantages when it come to how easily it gets installed and thats what i care about...lol they all going to do the same thing for real.
My 2nd remote won't pair. The first one (the one that beeps) works fine, the 2nd doesn't get any response even though the antenna goes green when trying to pair.
Did you ever figure out how to pair both the 2way and 1 way remote? Today my 1way just somehow unpaired so when I try to pair it then my 2way would unpair so can only pair 1 remote and not both like before.
Thank You Very Much....I was having a hell of a time getting both locked in at the same time, this video helped me more than you know!!
Nice video I finally got my remote pair after to wrong order of remotes😂 keep up the good work and tutorials por people out there 🎉
Yes, good video. I would just add that if are adding a second remote an already existing and working remote that you include that both will need to be as the same time, because if you only pair one the new remote the other remote will not work.
Dude yessss finally I’ve been struggling tryna fined a video to activate my other remote cuz man it was a hassle trying to fined my remote that worked only thing I need help on is now how to get the sound of the remote
Hello JP, Would it be possible for you to create a video tutorial on programming the Compustar 2-Way Remote for a car with a Push Start button? Thank You!
I have a 2019 Ram 3500 Promaster van with the Compustar system installed. Recently I lost all connectivity and took it back to the shop that installed it. To get it to work they said that they had to remove the battery from my Ram remote that came with the van Have you ever heard of this? They said that deep in the compustar manual it said to do this. Everything worked fine with both remotes for the last year but it just happened. I really liked the original remote to work also.
Hi JP. I recently bought a vehicle with the system installed. This really helped me out. I went to add another remote a week later and it isn't working. Any ideas how to fix it?
I’m trying to program a FTX1400R-AM I just purchased to replace the one that went bad, I have a 2013 Outback and can’t seem to get it into program mode! Any ideas would be great. Thanks Bob
I have honfa civic 2009 with CM5200 compustar but lost the remote so how i get antenna and remote starter?
Hello there this is ET ! How I turn on the panic mode. Because my truck sistem just flash on panic mode thanks for the advice Jp 👍
Is it possible to also pair a 2 way remote even if i have a one way remote start control already paired
Hey there, I’m following your steps but the remote won’t reprogram. Any tips you might have?
Thank you for Posting the video, my husband installed the CM7200 today, but it is very bad, my car can not start at all now, the original key can be turned, but the car has no response, no lights and no music! Has anyone encountered such a problem /. Please help me! Thank you very much!
Maaaaaan Thanks I didn’t know what was going on with my fob! I have drone mobile on my truck and I had to resort to just using the app from my phone to start and unlock the doors!
If it weren’t for him, I’d still be in the stone ages! Thanks bro! I really appreciate you!
Glad I could help💯
My auto start stopped working it just clicks multiple times. Do you have a video to fix this problem?
Can the new remote be paired without needing the factory key? My dog just ate my key and I’m looking to do this as an alternative and just add remote start too
Question:
I have the 4905s system installed in my car. But I want to upgrade the remote to the lcd T13 fob. The remote that came with it (which I use) range is like 3000ft-Will the T13 remote work with the 4905s system?
Thanks in advance family! 🫡
all of my buttons on my remote flash red. any suggestions
Bro killing it as usual
Preciate it man 🤜🏾🤛🏾💯💯
My problem is to see how the connection of G15 goes, please make a video on how to install G15 remote start step by step that will really help your viewers
Thank you it worked
I have tha alarm 4905 s iwant to buy t12 remot you ting works for my alarm?
Thanks for the video. I have a 7900AS system. Usually, when I lock my vehicle I get 3 chirps confirmation. However, sometimes it only chirps once. What's going on?
My car is suddenly not starting up just flashing when try to start but lock and unlock is working fine??
Do you need the antenna for this to work? My car was bought used had everything still installed. But the antenna. Came with the two keys.
How do you do this on a 2019 jeep wrangler that has a button start button… so I can’t turn the key on and off 5x because I have no key hole
To drive-off do u still need the factory key fob or can u just use the aftermarket key fob ?
Im using q9-fm can i fair t13 pro to my car??
Can you up grade those remote control
Thanks! It worked!
The sound that lets me know it started stop how can I turn that back on?
the unlock button only works when car is running from remote start... and the lock and hold only flashes lights in panic mode ?
But does the factory key fob still work?
Thanks brother love
Hey man, i also have a 4th gen ram and just installed the compustar 4900s. The only cable i think i needed to use was the two fused +12v, the ACC, Gnd, from the main heavy gauge wires. and then from the thinner wire blade connector i used CAN hi and CAN Lo, and ignition +, and the parking light mux. That was it. I am waiting on a USB cable to flash the blade so i cant really test it but does the wiring sound right? I think door locks and horn and stuff are supposed to work through CAN but not really sure the diagrams were not very descriptive.
I haven't programmed the blade yet so truck doesn't respond to anything but the remote seems to be triggering the relays in the box correctly.
Yea man that should be it. Let me know how it's going
@@jptheinstallguy thanks for the reply. I flashed it but the blade isn't detecting the oem key in the ignition. But i posted my wiring diagram on reddit and they were able to help me. I didn't realize the main ignition wire in the car has to be cut and routed through the remote starts. Once I do that i'm pretty sure it should detect the oem key.
@@jptheinstallguy it is installed and working great. I also had to run the thick gauge ignition wire into the blade ignition wires with a diode as well. But its working good. Thanks for the help
How do you see your lights flashing when you're inside your car to press that lock button?
The lights will flash and the module should click at the same time so if you can't see the lights it's not an issue just listen to the clicks
Only start work, no the others any suggestions?
Can you pair controllers from different model to a different system but same brand?
im not 100% sure with compustar remotes i know the viper ds4 has 5 different fob remotes that can be paired to it.
I have a compustar 4905s alarm and remote starter. I lost my keys had a locksmith make two key he delete old keys out computer now remote starter won't work
Did you fix it? I think i can help you
Thank you
My compustar remote start only turns red after changing batteries. Suggestions?
Whats up brother. I just actually picked up the 7900 compustar. How do you like these systems compared to the avital?
whats up homie. man i actually like the viper products better than compustar but both have there advantages when it come to how easily it gets installed and thats what i care about...lol they all going to do the same thing for real.
Wha about an aftermarket 1
My 2nd remote won't pair. The first one (the one that beeps) works fine, the 2nd doesn't get any response even though the antenna goes green when trying to pair.
Did you ever figure out how to pair both the 2way and 1 way remote? Today my 1way just somehow unpaired so when I try to pair it then my 2way would unpair so can only pair 1 remote and not both like before.
Everytime i pair one the other loses it pair how do I fix that
Did you ever solve the problem? I'm having the same issue and can't figure it out.
Easy peasy
Didn’t work. Wont recognize the new one
mine flashes but then my alarm goes off
Are u singing or rapping?!?😊