Audio Amplifier Transformers DIY Step-by-step Better than Factory
ฝัง
- เผยแพร่เมื่อ 9 พ.ย. 2022
- Learn how to create your custom Audio Transformers at home.
As an amateur, you will need Class B audio amplifier’s transformers but, unfortunately, they are obsolete nowadays and very rare to be found. Possible thru some Chinese websites but it is not guaranteed. Even if you find them, definitely, they will be of low quality and poor performance. So what if you can craft them yourself and with high quality also? This video will show you how to do that step by step.
Transformer T1 Technical Information:
drive.google.com/file/d/1tJQK...
Transformer T2 Technical Information:
drive.google.com/file/d/1eQH4...
My own design Amplifier:
drive.google.com/file/d/1izK6...
Panasonic R-218 D Amplifier:
drive.google.com/file/d/1br6J...
Sanyo RP-1270 Amplifier:
drive.google.com/file/d/1b9st...
Panasonic RF-562 D Amplifier:
drive.google.com/file/d/1dA7X...
Chinese Radio DO.10 Amplifier:
drive.google.com/file/d/1Fz_U...
See a radio created using these custom transformers:
• Making copy of SANYO R... - วิทยาศาสตร์และเทคโนโลยี
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 65 [ซับไทย]](http://i.ytimg.com/vi/4EsinscQCfs/mqdefault.jpg)
This is Victoria from Grewin
We are winding machine manufacturer from China
I saw your transformer process via TH-cam and it looks great.
We have fully automatic and semi-automatic products to meet your production needs and capacity.
Great video! Thank you🙏
Very informative video and still one of the hardest to watch that I've ever seen.
نتمنى حلقة خاصة تتكلم فيها عن نفسك ...
ماشاء الله .. تبارك الله انت شخص غير عادي ..
واتمنى لك التقدم والتوفيق..
Your video is very useful Thank u so Mach
Some very useful tips. Thanks. 🙏
Very cool! Thanks!
I appreciate your work, because I know the value resulting from it. My congratulations.
Outstanding!
Thanks, good Job 👍❤
good job!😀
Thank you
amazing
Lol, im trying to learn how to make output transformers for tubes, and now this rabbit hole has peaked my curiosity. I have an old B&O bristish solid state amp like this. I need to repair it at some point, might as well start learning now lol
Good “husky” comment, lol, lol, lol, lol…
@afaiffem 🐺💙 I think I may be related to Rusty from Uncle Doug somehow. Vintage electronics are way too fascinating, lol
Marvelous.
I enjoyed that you are salvaging scrap to make valuable products. I always enjoy doing the same. I always wanted to try making a tube output transformer from discarded ferrite power supply transformer cores. However the bandwidth may limit its frequency response at audio frequencies. Did you try any?
تحياتي من القاهرة
Nice
❤❤❤🎉
Master
Hello, I want to make an audio transformer. According to datasheet I need to make it 1:1 turns ratio, 10k impedance in both primary and secondary, 550ohm resistance on primary and 500ohm resistance in secondary. How do I calculate number of turns or copper wire gauge?
Its hard to measure the low resistance of a 30 cm wire... Can you please tell the wire gaunge numbers for input and output transformers for Panasonic radio
Northridge FIX?
wondering if ur intrested in making me a 1:1 transformer needs to be around 350 turns need to get around .012ohms on primary and .015ohms wire is 0.1mm wire and a EE19 bobbin its wound ccw for both primary and secondary
Yea
@@afaifeem what am i looking at cost wise
However, I believe it would be better to invest a little in demonstrating the results using better quality equipment, even knowing that this is a subjective assessment.
Yea, that is one thing…
Go ahead, man! Keep up your fine work!
Greetings from Portugal!
Macedo Pinto