I've seen vids where guys will jigsaw 8 transition panels & all 8 look nothing like the other & spend 1/2 a day just sanding & still not get it right. Finally someone had the sense to get a router & flush trim bit...bang on, every time.
a crew that knows what a router is , you guys are the 1st ones i have seen in all how to build a skate ramp videos use a router , when i built my last half pipe i cut out all transitions rough and made a jig and cleaned them up with my porter cable , it was the smoothest ramp i have ever built . kudo's to you guys
Wow! Very cool! Why in the wold would did someone "dislike" this video?! Must have a daily quota of negativity they have to meet each day. Anyway, awesome video -that ramp looks solid and will last a lifetime.
Lol I’m checking this out a year later and it looks great! But looking at the comments on asking for the plans and such, if you had any experience in framing or carpentry, you’d have a pretty good idea on how to build it, maybe even making the dimensions easier so you don’t have to cut as much but good work guys! Maybe skate lite for the top layer or something of the sort would make it better but I’m sure you know that!
I know 1/4" plywood will bend like that, especially if you get it a little damp before screwing it down. I'm curious if 3/8" plywood will? Guess I'll have to find out
Great build bro! You know, right now I’m strongly considering build one of those for me here in my backyard (Portugal / Perosinho) to scape this big depression (covid/terror/govs/lockdowns). Where are you from guys? Cheers
@@erlingo6449 And at the and I came back to Brazil and I'm skating more than ever. Also, there's a new skatepark coming true here in my city. At least the money the government steals from us has turned into something useful.
For anyone who is looking to build a ramp or any feature for outdoor use you NEED TO USE PRESSURE TREATED LUMBER AND PLYWOOD!!! Otherwise it will just rot. PT lumber is what fences and deck are made from . They also must have good air flow and be off the ground. This ramp they build will rot away in no time. Never close the back like they did either
Mine looked like this 4 years ago now my surface has rotted away I used marine ply good paint and covered it and it still died can’t afford skatelite 😢😢😢 UK weather is savage
I feel your pain mate, I live on the west coast of Scotland so it's always wet here. Did you paint it before assembly or after? I know it will die, but I'm so tempted to do it again but paint every inch of it all after cutting. It's the hope that kills you haha.
I don't see anything in the description other than overall dimensions. I'll have to convert metric to standard. I'd like to know the transition radius as well.
I'd be worried that's not enough of a riding surface. Generally would want two layers of 3/8" ply, then whatever your top surface is. I'm guessing you went with sanded Fir or something similar?
What is the purpose of using the router at 2:02-2:07? I understand smoothing the sides to make sure that they're all even, but what exactly are you doing in 2:02-2:07?
Looks like Gator Skins. There's only a couple outdoor wood skate surfaces on the market, Skatelite and GatorSkins, probably more, but those are the only two I've heard of in my research on making my own miniramp... Gatorskins is a bit cheaper than Skatelite.
@@whitneylemelin7400 I can't afford the pro stuff either - my plan is to lay down my heavy ply layers and then run a layer of tar paper over it, and finally skin it with 1/4" birch ply - that way when the rain eventually wrecks the top I can just peel off the thin top layer and everything underneath it will be protected by the tar paper and I just just reskin the top with the cheaper thin stuff. I'm also going to try to keep it tarped when it rains but that can be a pain in the ass
@@TheIronDuke9 Remember you're going to have hundreds of screw holes in the tar paper for water to leak through. We Thompson sealed all our substructure and sub layers
@@TheIronDuke9 That was my original plan as well. After a month of leaking tarps and wet warped plywood, I bit the bullet and paid for the Gator Skins. I now never cover it and it looks great still.
my dream is to have one of this in my backyard, but at my country the price is so much expensive that there's no way you get to buy one of this between 3000 $
This looks cool, but it's completely unnecessary to put the surface at an angle. It would have been more practical, durable and faster to use Gator Skins. In addition to that, Gator Skins is so smooth and fast while providing just the right amount of grip and it doesn't need covered.
I've seen vids where guys will jigsaw 8 transition panels & all 8 look nothing like the other & spend 1/2 a day just sanding & still not get it right. Finally someone had the sense to get a router & flush trim bit...bang on, every time.
Beautiful ramp! Very clean and precise work, it adds up and shows. Well done 👍👍
Of all the back yard mini ramps I've seen, that one is the best quality
Yeah it looks great, it's a shame that they didn't use a proper quality skate surface to match though.
Is there any chance you’d be willing to share the plans you used for this? This is the best miniramp build I’ve ever seen, hands down!
It’s in the description
❤Fgjvfvj
No Plans ? Only the Sizes?
Good job angling the plywood. Looks great.
Thanks for this video!!! Now i can build it my self
My dad made one just like that when i was around 10 years old and skated all the time. Loved it so much.
a crew that knows what a router is , you guys are the 1st ones i have seen in all how to build a skate ramp videos use a router , when i built my last half pipe i cut out all transitions rough and made a jig and cleaned them up with my porter cable , it was the smoothest ramp i have ever built . kudo's to you guys
Was awesome watching y’all build the mini ramp, thanks for posting. 🤘
@VR Freddy yes yes very much
Wow! Very cool! Why in the wold would did someone "dislike" this video?! Must have a daily quota of negativity they have to meet each day. Anyway, awesome video -that ramp looks solid and will last a lifetime.
Nope, this one is gonna sink in the ground and lose it's level in no time, sadly. It's really nice tho
We built it one year ago and it still steady and leveled
@@_-0_x_-_p_0-_ yeah I'm not a huge fan of it either but it's bearable.
Que show ficou a rampa de vocês, parabéns pra todos. Um abração.
so clean looking very nice!
Ramp building, camera, and editing skills to rule all!
Man that looked fun to build and skate!.
Awesome video! 🤟
I want to see one of those built right now with the lumber prices being crazy lol
Crying in expensive Norway
Great work.
so perfect. love to see a breakdown of the plans
yes
Great stuff bro!
Such a group of bosses!!
Great idea putting the finished skin on at 45°!
Although completely unnecessary. Should have used Gator Skins, they'd be happier in the long run.
sick dude. love the new video. keep up the good work
Finally a proper skinned mini ramp🤙well done
Nice one !
Great work! Nice Video
Nice work!!!
Best vid iv seen in a while
In the process of building one now. What did you use for the top layer covering?
Lol I’m checking this out a year later and it looks great! But looking at the comments on asking for the plans and such, if you had any experience in framing or carpentry, you’d have a pretty good idea on how to build it, maybe even making the dimensions easier so you don’t have to cut as much but good work guys! Maybe skate lite for the top layer or something of the sort would make it better but I’m sure you know that!
how long did this take
I was wondering what thickness the plywood you used was. Thanks, great video!
I know 1/4" plywood will bend like that, especially if you get it a little damp before screwing it down. I'm curious if 3/8" plywood will? Guess I'll have to find out
1/4
inch
excelente video
O.C.D by Daniel Zrihen
Dear bro , What kind of plywood do you use? Where you buys ?
Great build bro! You know, right now I’m strongly considering build one of those for me here in my backyard (Portugal / Perosinho) to scape this big depression (covid/terror/govs/lockdowns). Where are you from guys? Cheers
Daniel Borges there in America
@@BlitzBodyBeats my guess would be Australia
krkrkrkrkrkrkrkrkrkrkrkrkrkr
@@erlingo6449 And at the and I came back to Brazil and I'm skating more than ever. Also, there's a new skatepark coming true here in my city. At least the money the government steals from us has turned into something useful.
I _ D _ A
Can you give me tips on how I should figure out a 8 FT width by 16FT in Length half pipe
Hey mate! I know this is an old video but was wondering how big this ramp is and what size radius you used ? Cheers mate
Is there any plans yet? Sick ramp. Or atleast know what ply you used radius and waterproofing
Bad ass!!!!!!!!!!!!
Awesome build. What radie do you used for the transistors?
currently looking to build a ramp with friends. lots of discussion going on about the best radi for a 4 ft ramp.
Material list? How many of each lumber
Going to build one
For anyone who is looking to build a ramp or any feature for outdoor use you NEED TO USE PRESSURE TREATED LUMBER AND PLYWOOD!!! Otherwise it will just rot.
PT lumber is what fences and deck are made from . They also must have good air flow and be off the ground. This ramp they build will rot away in no time. Never close the back like they did either
it’s a mini ramp also can you tell us the plans for it and how much it cost I can calculate the inflation of wood but can you tell us?
What's the timestamp where they show the half pipe?
3:30 nice edit bro
Hi folks
thanks for sharing the amazing work
What is the thickness of the table used at minute 4:33? in millimeters or centimeters?
How long is the flat bottom?
do u think this could be done in someone backyard in 1 week or maybe less.
How long did it take u
Just about to build for the kids. What top surface is that
This looks hella dope. Nice job! Would you have any plans I could look into?
Thanks! Still Working on the plans, need to do some changes I came across during the built
Let me know when you put these plans together!
Can I hire you to build me one 😐 no joke I am serious
do you have building plans
Nice vid what did you finish the surface of the ramp with ?
what materials did you use?
How did you fix the cooping?
Nice work✌️✌️
Mine looked like this 4 years ago now my surface has rotted away I used marine ply good paint and covered it and it still died can’t afford skatelite 😢😢😢 UK weather is savage
I feel your pain mate, I live on the west coast of Scotland so it's always wet here. Did you paint it before assembly or after? I know it will die, but I'm so tempted to do it again but paint every inch of it all after cutting. It's the hope that kills you haha.
I've never seen anyone run the plywood diagonal like that before - should I be doing that with mine? Is there a big advantage?
I wonder too. Maybe it’s just to look cool
its to stop your wheels clipping the edge of a piece of plywood if it sticks out and it looks cooler
Its way more comfortable to roll on since your hitting the gaps one wheel at a time
yes, big regret from my first mini but it was so it could be moved...building one soon though
Eliminating perpendicular seams makes for a smoother ride. However, that was entirely negated by only using one layer of plywood under the top layer.
Can I pay you guys to build me one😂
2 sheets of ply and one of them is like what 2mm? surely someones wheel is gonna go right through that
I don't see anything in the description other than overall dimensions. I'll have to convert metric to standard. I'd like to know the transition radius as well.
Curious how you put the screws into the 2x4's from the center plywood piece; were they angled in? Minute 2:37
it's smarter to build the two ramp sections separately and use a large bolt or a bunch of screws to join them
You shouldn't have to worry about doing that unless the ramp you're tying to build is over 6 feet wide if so every 6 feet you should section it
I'd be worried that's not enough of a riding surface. Generally would want two layers of 3/8" ply, then whatever your top surface is. I'm guessing you went with sanded Fir or something similar?
Outstanding work!! Bad ass ramp, what length are the transitions? If I’m saying that right, it looks like maybe 7? Very nice
What’s are your using on the wood to protect against the elements?
What is the width and length??
How long, tall and wide is this and also what was the cost of everything in total
Shaun Mckay My guess is 12 feet wide, 4 feet tall, and from my personal experience it would cost 1,500 to 1,750
its in the desc
Who is playing the guitar solo? 2:17
Hey any chance you could share your plans for this ramp?
how did you put the coping?
Great video!! What transition radius did you use?
Is that regular 4x8 plywood
Yes
Nice job but the masonite were still damp from the rain....
what are the dimensions?
וואו נראה טוב אני גם מנסה לתכנן בנייה של רמפה לסקייטבורד ומסתבך קצת אם איזה סוגי עצים צריך אשמח אם תוכל לרשום איזה סוג עץ אתה משתמש לכל חלק
podrias subir los planos ? gracias !
how much was the overall cost of the material
how did u get ur clips in end to speed up and slow down like that??
Editing
What is the purpose of using the router at 2:02-2:07? I understand smoothing the sides to make sure that they're all even, but what exactly are you doing in 2:02-2:07?
Exactly as you say, make it all even. You can do it also with jigsaw only
Hola, quisiera saber que radio usaron? un saludo desde Chile.
Wtf?
How much did it cost
You woukd have got it done alot quicker if you had a cup of tea every now and then. Tea's up lads.
מגניב !!!
Why is the sheeting placed in a 45 degrees angle?
So both wheels don't hit a crack at the same time, smoother ride ;)
Did you leave any spaces in between the top layer of plywood?
No
Yo! im looking to copy this build for my backyard! if you don't have any objections, would you email me the plans ? like the amount of wood and sizing
How much
was this project?
$1500 read the description
Thank helps me build my own
Cool
cool
What type of material did you use for the finishing surface?
Looks like Gator Skins. There's only a couple outdoor wood skate surfaces on the market, Skatelite and GatorSkins, probably more, but those are the only two I've heard of in my research on making my own miniramp... Gatorskins is a bit cheaper than Skatelite.
@@brocmt No Way thats Gator Skins or Skatelite with a $1,500 build cost. That's plywood, probably marine grade birch. That's what I'm putting on mine
@@whitneylemelin7400 I can't afford the pro stuff either - my plan is to lay down my heavy ply layers and then run a layer of tar paper over it, and finally skin it with 1/4" birch ply - that way when the rain eventually wrecks the top I can just peel off the thin top layer and everything underneath it will be protected by the tar paper and I just just reskin the top with the cheaper thin stuff. I'm also going to try to keep it tarped when it rains but that can be a pain in the ass
@@TheIronDuke9 Remember you're going to have hundreds of screw holes in the tar paper for water to leak through. We Thompson sealed all our substructure and sub layers
@@TheIronDuke9 That was my original plan as well. After a month of leaking tarps and wet warped plywood, I bit the bullet and paid for the Gator Skins. I now never cover it and it looks great still.
my dream is to have one of this in my backyard, but at my country the price is so much expensive that there's no way you get to buy one of this between 3000 $
Yo yo yo
magniv!!
אתה ישראלי? כי שמעתי עברית
The list below is all the requirements for this
1.Wood
2.Wood
3.Wood
4.Wood
5.Wood
ahavti ;)
This looks cool, but it's completely unnecessary to put the surface at an angle. It would have been more practical, durable and faster to use Gator Skins. In addition to that, Gator Skins is so smooth and fast while providing just the right amount of grip and it doesn't need covered.
Your lucky you can get a half pipe my parents can't afford one