I love multipiece wheels, forged rather than cast, with a knurled surface that works like a bead lock. The Signature SV303s is my favorite, with a chrome lip and gunmetal spokes but the cost is astronomical. Dear Santa Claus, I was really good this year...
Price wise no, but customization & the fact that if something goes wrong in a accident, parts are easy to replace & technically you don’t have to worry about something being discontinued because as long as your faces are intact you are good & if they do become discontinued, they become more sought after 👀
Miraculously finding and buying a brand new staggered set of discontinued 3pc 19’ Work Euroline LS406 was the best decision ever made regarding the wheels I’ve got on my W211 E55 AMG. I would never go back to the standard ones.
@@FitmentIndustries i cant help but wonder if he bought them from yall🤔 does fitment industries give you the experience of dealing with major delay when making a purchase as big as wheels and tires? we aint got thousands to just throw away we literally save up that money from like 2 years bruh- aint no joke
You can fine tune a 2-piece welded wheel fitment/offset in 1 mm increments vs 3-piece where you can only put together what you have to work with. But you’ll be limited by width with 2-piece. I own both and there’s pros and cons for both.
Well I think for looks they are okay. For performance just go with single / monoblock lightweight cast or forged type wheel. For the price of the 3 piece I would rather get a cast or flow forged wheel with the right specs and keep the change.
Not for me. I don't care for the exposed hardware look but I admit you made a point about keeping them for other cars later and PCDs and so on. Weight is a big issue for me though.
I am Sam, Sam I am, I wear lip stick when I am, awake asleep being neat, and a creep. Cooking with pam sprayed from a can I am. Keep up the good work your getting more comfortable and less, Um but ah or eh etc etc. much love. This reminds me I need tires…. 🤘🔥😎🔥🤘
The people who will argue against paying 2K for a set of 3P Wheels. Are the same people who will buy a second set of cast wheels for ANOTHER $1000 because the first set they broke cracked on a 5in manhole on the highway.
While I have absolutely no experience with a "Multi-Peice" Wheel, they are Super Yrick thanks to BBS and Anovia. --(Y'all keep changing the Brand name of these In-House Wheels, WHY?) Is there a rubber gasket/seal that goes between the Rear Barrel and Front Barrel, or can RTV/RVT be used? I would absolutely jump on some "3-phase" Wheels for my 2020 Toyota Yaris Sedan, but there is ABSOLUTELY NOTHING available for Widebody or Aero Kit for my "PRETIOUS PONY"... 😿 Many thanks, -T🖖 Western Washington State
Aodhan makes “fake” or replica 3pc wheels. The hardware around the outside on some of there models are just for show and are non functional, which makes them fake.
@@debbaronero stay away from Aodhan. Garbage wheels even for reps. Just look for Enkei wheels secondhand or even buying new, they are cheap for good wheels.
There trying to find as many reasons to buy these overprices wheels when u can get better looking wheels one pice wheels for way cheaper but they want you to buy the most expensive stuff on there sight if you follow this channel for information they will obviously be biased since they seek all wheels they want u to buy the most expensive ones these
What do you guys think of multi-piece wheels?
For all wheels, tires, & suspension! 👇
www.fitmentindustries.com/
I love multipiece wheels, forged rather than cast, with a knurled surface that works like a bead lock. The Signature SV303s is my favorite, with a chrome lip and gunmetal spokes but the cost is astronomical. Dear Santa Claus, I was really good this year...
The BBS LM is my top wheel ever. Love how the the mesh looks. Reminds me of the 80s euro cars coming up
BBS LM's are a vibe, they're great wheels! -Edgar
Price wise no, but customization & the fact that if something goes wrong in a accident, parts are easy to replace & technically you don’t have to worry about something being discontinued because as long as your faces are intact you are good & if they do become discontinued, they become more sought after 👀
Miraculously finding and buying a brand new staggered set of discontinued 3pc 19’ Work Euroline LS406 was the best decision ever made regarding the wheels I’ve got on my W211 E55 AMG. I would never go back to the standard ones.
Ordered my work s1 3p for my widebody genesis coupe in October 2021. Still delayed till this October 2022😢
Oh man.. 🙁 -Edgar
@@FitmentIndustries i cant help but wonder if he bought them from yall🤔 does fitment industries give you the experience of dealing with major delay when making a purchase as big as wheels and tires? we aint got thousands to just throw away we literally save up that money from like 2 years bruh- aint no joke
You can fine tune a 2-piece welded wheel fitment/offset in 1 mm increments vs 3-piece where you can only put together what you have to work with. But you’ll be limited by width with 2-piece. I own both and there’s pros and cons for both.
Thanks for the info fam! This is good to know. 🤝🤝🤝 -Edgar
If I were to drive normally and avoid bumps and pot holes would the wheels be safe from any damages?
Well I think for looks they are okay. For performance just go with single / monoblock lightweight cast or forged type wheel. For the price of the 3 piece I would rather get a cast or flow forged wheel with the right specs and keep the change.
i widebodied my brz first, and had it looking annemic for like a whole year on its stock wheels before my 3 piece wheels actually arrived
Not for me. I don't care for the exposed hardware look but I admit you made a point about keeping them for other cars later and PCDs and so on. Weight is a big issue for me though.
Can I get the little crayon spikes for all the little bolts along the wheels like I can the lug nuts?
Its not the first time my comment got a heart from fitment industries
-pt cruiser gt to the death
But I'd like an asnswer, better yet send me a link
Are you shipping your wheels here in the Philippines? That would be dope!
Shoot us an email at wheels@fitmentindustries.com and they can answer that homie! 🤘🏾🤘🏾🤘🏾 -Edgar
@@FitmentIndustries I love you! ❤️
i usually like how regular wheels look over multi piece. obviously there are some that look great but a lot look ricey to me
👏👏👏 -Edgar
makes sense most expensive wheels look rice haha
@@jakelikeslowcars sorry if the take was too hot
Do yall sell barrels for business 2 piece?
We don’t sadly. :( however you can shoot us an email at wheels@fitmentindustries.com and we still may be able to help! -Edgar
I am Sam, Sam I am, I wear lip stick when I am,
awake asleep
being neat, and a creep.
Cooking with pam sprayed from a can I am.
Keep up the good work your getting more comfortable and less, Um but ah or eh etc etc. much love. This reminds me I need tires….
🤘🔥😎🔥🤘
👏👏👏 bravo! -Edgar
The people who will argue against paying 2K for a set of 3P Wheels.
Are the same people who will buy a second set of cast wheels for ANOTHER $1000 because the first set they broke cracked on a 5in manhole on the highway.
Been on my "cheap" $1000 one piece wheels for months now in PA pothole haven
i appreciate this video!
We appreciate you 🤝🙌🏽 -Edgar
So they are like super-fancy hub caps.
wow, thats the most ghetto comment in here😂😂
Throwback to gangnam style reaching 1bil in 6moths 😅
While I have absolutely no experience with a "Multi-Peice" Wheel, they are Super Yrick thanks to BBS and Anovia. --(Y'all keep changing the Brand name of these In-House Wheels, WHY?)
Is there a rubber gasket/seal that goes between the Rear Barrel and Front Barrel, or can RTV/RVT be used?
I would absolutely jump on some "3-phase" Wheels for my 2020 Toyota Yaris Sedan, but there is ABSOLUTELY NOTHING available for Widebody or Aero Kit for my "PRETIOUS PONY"... 😿
Many thanks,
-T🖖
Western Washington State
What do you guys think about forgiatis lmaoo?
Fitment🤝some random guy on his 4th day of asking for so you want a Mazdaspeed 6
🤝🤝 -Edgar
What about brands like Adohan? They are not that expensive and still 3 piece!
Aodhan makes “fake” or replica 3pc wheels. The hardware around the outside on some of there models are just for show and are non functional, which makes them fake.
@@TMWYT are they heavy? I need some wheels for my first track car and I care about looks, but weight is even more important!
@@debbaronero stay away from Aodhan. Garbage wheels even for reps. Just look for Enkei wheels secondhand or even buying new, they are cheap for good wheels.
They are prone to leak
Monos ftw
I’d buy a 3-piece wheel and just… not wide body and ruin my Nismo 370z….
Hey now.. -Edgar
Dude chill 😂 at least get a set of fender flares for it to cover up that exposed tyre surfaces poking out the fenders
Less than a minute and I'm here
Welcome to the party! -Edgar
Monobloc all day, everyday…
Nope not worth it. To me its just a "flex" to show.... hey I got $$$ wheels. No real purpose served.
OZ stop making multi-piece wheels right now.
6thst 😏🥴
First!! 😏
💽💽💽 -Edgar
There trying to find as many reasons to buy these overprices wheels when u can get better looking wheels one pice wheels for way cheaper but they want you to buy the most expensive stuff on there sight if you follow this channel for information they will obviously be biased since they seek all wheels they want u to buy the most expensive ones these
Day 284 of asking for a "So you want a nissan juke"
🍖🌮🍚 -Edgar
@@FitmentIndustries 3️⃣🅿️ 🎡
562st
💎💎💎 -Edgar
TE37SL FOREVER! 💪
Day 430 so you want a suzuki
🐳🐳🐳 -Edgar
This shit sux with out Alex. I'm out
I mean.. he’ll still be around. :( -Edgar