The haptic motor feels like a Z Axis, and looks like a Z Axis, an improvement over the A33's essentric mass motor Felt exactly like my S7's motor :) (Oh and fun fact: the S21's motor actually works well with the S7, too bad it just won't fit, and if that's the case, I think its possible for the same thing to happen to the A34, but fitment, like the S7, will be the issue.. the S7 with a S21 motor felt just as good)
Hey on my phone it is not recieveing service anymore, maybe 20 percent of the time, not because of un paid bills and got a new sim card. I opened it up to take a look and everything looks fine other than that grafite film is puntured. This would not cause a loss of service in anyway right?
Nice vid, mostly well done, But , what heat and how much? and what adhesive and where, with out these tow pieces of info how could anyone proceed? Teaching or showing off...
If you properly apply the original water resistant adhesive made for the phone, then should retain the water resistance. If you use a generic adhesive and cut it down to size then no.
if you mean the sub board, you need to make sure you get the same model number version since there are different region versions with different antenna configurations.
@@PBKreviews I have a samsung A34 5g. The supplier tells me that the pieces have been tested but they are two pieces that are not accepted by the network. Old piece everything is fine, except the microphone.
You would need to heavily modify the frame itself to cut out an area and add a second vapor chamber since you can't modify the original. Wouldn't really be worth going through the trouble for the amount of difference it would make.
yeah, unless you use the original pre cut adhesive made for the phone to re apply the back. As long as its installed properly, will retain water resistance.
It isn't too difficult to replace the screen. All you have to do is pry off the back, and remove the screws on the bottom speaker assembly and remove that then disconnect the cables from the sub board and remove the sub board, pry off the old screen apply the new one and re assemble. It seems like a lot of work but compared to most other phones, its much simpler.
@@087_anggerpribadiwibowo5 samsung from entry level up to flagship these time totally uses the same design. only s23 ultra is different than others 😵💫
Can you please let me know what the name of that black circle part on the sub board is that has the 3 letters and 2 gold squares and what is the use of it , because on mine a34 it's missing and the touch isn't working
The vibrator motor? that is not on the sub board, the sob board sits over it making a connection with the gold contacts. It would not cause you to have touch issues if its missing. However, a damaged screen cable, or the flex cable which connects the screen cable to the main board can cause an issue. Also a damaged connector on either of those, or just a defective screen.
Someone pls let me know what that black circle thing with the letter is on the sub board and it importance because on my phone it's missing and the touch isn't working
not sure what you're referring to. Give me a time stamp and a better description. Also post a separate comment instead of a reply so it will show up for me to reply again.
This year they made their S23 lineup look like the A lineup
And they did good
A talented electronic engineer. It broadens my mind. Million tks
👍 you're welcome!
man you dont know you just safed my life love you ❤
As always, smooth and detailed presentation! 8.5 repairability is relatively rare. Great job!
Thanks 👍
Perfect Disassembly, Wow Superb...
SAMSUNG made a Great Design
What adhessive did you use for the back panel?
The haptic motor feels like a Z Axis, and looks like a Z Axis, an improvement over the A33's essentric mass motor
Felt exactly like my S7's motor :)
(Oh and fun fact: the S21's motor actually works well with the S7, too bad it just won't fit, and if that's the case, I think its possible for the same thing to happen to the A34, but fitment, like the S7, will be the issue.. the S7 with a S21 motor felt just as good)
👍
Accidentally put the sim ejector in the secondary mic, so thankful man , so thankful , my heart can rest in peace
4:48
Wish this was made in Canada and usa. Does the Galaxy a14 have the same protection for the mcrophones when you stick the sim tool in the wrong hole?
No
What is the name of the piece that the Main flex is connected to below?
Hey on my phone it is not recieveing service anymore, maybe 20 percent of the time, not because of un paid bills and got a new sim card. I opened it up to take a look and everything looks fine other than that grafite film is puntured. This would not cause a loss of service in anyway right?
So you dont have to take out the screen if you want to replace the battery
Nice vid, mostly well done, But , what heat and how much? and what adhesive and where, with out these tow pieces of info how could anyone proceed? Teaching or showing off...
B7000 glue
Watching on a34 🥲🥲🥲
Lm was samsung A34
yep, i'm also
Me too ahahah
SAME
teardown 😅😬😬
Can you replace a broken camera glass without opening the device?
What type of plastic is used on back?
Would the back piece unstick?
Can you change the battery?
Hi bro how much cost original battery cover for the a34 ?
Does the RAM located underneath the processor?
Unboxing samsung galaxy a24 and teardown please
hey, i have a question, if the screen is black but the phone is up, whats the issues that could be?
bad display, bad backlight for the screen, loose cable, water damage etc.
By the time the battery has lost its usable capacity a replacement would probably be hard to find
not really, Samsung replacement parts are widely available.
how to fix ghost touch because of water? my phone got ghost touch and can't use the home button after fell off to my water bucket😢
Awesome review as always.. ❤️
I think they miss thermal paste :v between the graphite film and the vapor chamber.
Does the A34 use a Lithium Ion or a Lithium Polymer Accu ?
Lithium Ion
Thank you very much !
Hello where can i get an a34 5g screen or could you source 1 for me would really appreciate it
www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=a34+5g+lcd&_sacat=0&_odkw=a34+5g+lcd&_osacat=0
can it still be water resistance after reassembling
Of course, you need to apply new adhesive
How do you re stick the back plate,mine is slowly peeling off.
th-cam.com/video/T4iiPUIM7-Y/w-d-xo.html
Is it still water resistant afterwards?
If you properly apply the original water resistant adhesive made for the phone, then should retain the water resistance. If you use a generic adhesive and cut it down to size then no.
Is it vapor chamber as cooling system?
Yes
You are the best!
thanks 👍
after changing the microphone it doesn't connect to the network, why?
if you mean the sub board, you need to make sure you get the same model number version since there are different region versions with different antenna configurations.
@@PBKreviews I have a samsung A34 5g. The supplier tells me that the pieces have been tested but they are two pieces that are not accepted by the network. Old piece everything is fine, except the microphone.
My problem the back plate so easy to scratch already put casing stil have scratches 😅
lol yeah
Jesus... the plastic back panel is so thin..
Do the teardown of lava agni 2 5g bro
Is it possible to modify vapor chamber make it more wide than originally?.
You would need to heavily modify the frame itself to cut out an area and add a second vapor chamber since you can't modify the original. Wouldn't really be worth going through the trouble for the amount of difference it would make.
And after reinstalling, the Samsung Galaxy A34 lost its water resistance 🗿
yeah, unless you use the original pre cut adhesive made for the phone to re apply the back. As long as its installed properly, will retain water resistance.
2:58 Isn't that ambient light sensor?
Yes
Me watching on my A34
😬
원가절감 뒷면 대박ㅋㅋ
I hate the way the s looks like the a line up.
Yeah they should keep each series looking a unique way and not the same.
Replacement of display is a big issue 😒
It isn't too difficult to replace the screen. All you have to do is pry off the back, and remove the screws on the bottom speaker assembly and remove that then disconnect the cables from the sub board and remove the sub board, pry off the old screen apply the new one and re assemble. It seems like a lot of work but compared to most other phones, its much simpler.
no sir. you're wrong, these is s23 plus. not a34 🤢
Wdym? S23+ use glass back cover, lol 😂
@@087_anggerpribadiwibowo5 samsung from entry level up to flagship these time totally uses the same design. only s23 ultra is different than others 😵💫
thanks
good♡
👍
☕🔥
The vivo V27 5g teardown
I don't usually get many viewers for vivo phones to justify purchasing the device.
❤️👍🇲🇦
👍
Bekar mobile h
you are a bot
Can you please let me know what the name of that black circle part on the sub board is that has the 3 letters and 2 gold squares and what is the use of it , because on mine a34 it's missing and the touch isn't working
The vibrator motor? that is not on the sub board, the sob board sits over it making a connection with the gold contacts. It would not cause you to have touch issues if its missing. However, a damaged screen cable, or the flex cable which connects the screen cable to the main board can cause an issue. Also a damaged connector on either of those, or just a defective screen.
@PBKreviews ok thanks because the phone got fixed and they took a cable and the touch isn't working but the LCD is fine
Someone pls let me know what that black circle thing with the letter is on the sub board and it importance because on my phone it's missing and the touch isn't working
not sure what you're referring to. Give me a time stamp and a better description. Also post a separate comment instead of a reply so it will show up for me to reply again.