338 Mach3 Turn wizards O.D. Turning & O.D. Fillet for beginners
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Roger Webb takes you through Mach3 Turn wizards how to use them, O.D. Turning & O.D. Fillet for beginners with a Harbor Freight Sieg CNC lathe 7 x 14 inch. Which has been designed and made over the last 18 videos in; The Australian Inventors Workshop
CARVECO 5% discount code is- ROGERWEBB5798
store-us.carve...
ArtCAM tutorials
/ @delcamartcam
Help support my channel and become a Patron
www.patreon.co...
This channel;
A beginner’s handbook to Wood-turning Wood Lathes, CNC's, Laser's, CAD/CAM, Carpentry and 3D printing
Sponsored By Autodesk, Fusion 360, ArtCAM and Carveco
Autodesk Fusion 360
www.autodesk.com/products/fusion-360
WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 18!
Disclaimer:
These videos, commentary and or advice are intended for entertainment and inspiration for adults over 18-year-old. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.
hello robert ,,, thanks for your videos,
i'm learner of mach 3 turn ,,
watch your video in minute 8,53 after setting the tool to 0 with the manual screen, as you do to start the cycle for it to start turning.
screen changes?
thanks ,,a lot. Joan.
The problem with the radius not being able to be larger then 4mm is not a problem. You were creating a radius from 18mm DIAMETER to 10mm DIAMETER. The difference is 8mm in DIAMETER i.e. 4mm radius.
You are right with this too, I was not feeling the best this day of filming, thanks.
Roger Clyde Webb
good job, Rog, I wish it were Centroid Acorn rather than MACH, but educational anyway.
Following closely
Thank you, for watching,
Please like, subscribe and forward the video on to a friend, Roger Clyde Webb
Hello sir ,
First time i watch this video ..but mach3 lathe wizards is not working. i put the all values then save settings and post code its not working..
What i do sir please
Half an inch is 12.7mm not 12.4mm.
A surface speed of 50 for aluminium is very slow. The insert manufacturer will have recommended surface speeds.
Thanks for the video.
Yep ok you are right, I will correct this in the next video
Thank you, for watching,
Please like, subscribe and forward the video on to a friend, Roger Clyde Webb
I'm watching , thanks for the info. I'm drawing up a homemade cnc mill / mill turn combo now. So you have a lot of pointers.
Thank you, for watching,
Please like, subscribe and forward the video on to a friend, Roger Clyde Webb
Why do OD Turning and ODFillet not work?
What are they for?
Greetings from Colombia.
Thanks for sharing.
How is the 3D part displayed on the mach3 screen?
The clicks have not worked.
Thank you for your valuable time and wise response.
Health blessings.
Hi, you will need Carveco Maker+ for 3D work
@@rogerwebb9600
Cordial greeting.
It really is in the same mach3; I have seen videos where the piece is rotated so that it can be seen in 3D.
If you look at the cover of the mach3 lathe manual, you can also see how the part is located.
Thank you for your valuable time and wise response.
Health blessings.