FIRE SPRINKLER FLOW SWITCHES & TEST SOLENOID TEST.
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- In Australia, we have to test all flow switches and test solenoids every six months to comply. The solenoids must activate & stop. The flow switch must send flow signal to the fire indicating panel... then to EWIS to start the evacuation process.
Very comprehensive video god job putting pictures and filming
Good job sir, more videos for learner sir..
Very nice sir
Bless Tuesday keep watching and support from Al Khafji Saudi Arabia.
Thanks Mate... Take Care always.
Full effort sa tutorial and editing ng vid tito! 👏😍
Happy 300+ subs more to come! 😇
Thank you for sharing your experience
Thanks Mate. Please tell others so they have can learn too.
Good job
Hi Elmer, could you please make a video for vigilant fip test and how to edit address for this brand detector, it's better share the other video about Tyco fip.thank you. ☺️
No problem Mate. It will take a while but it will happen. F400, MX and F3200. Cheers.
@@fireprotectionguy7943 thank you so much, your video is really helpful to me
@@qujacky5134 No problem Mate...that's the purpose...to help other guys in the industry.
Running the pump " manually " every time you test a flow switch to bring the pressure back up ... that's the dark ages , let the jockey pump do it automatically ( unless in Australia they have their own fire code regarding testing ) also, do you keep a record of time activation of the every flow switch ?
Annual Test? Don’t you guys have the AS1851-2012 in NSW? or did the FPA crash course misguide you guys?
This is awesome info. I assume that faults in the system can trigger a false alarm?
Fault is just a fault but If the flow switch activated (false activation) without losing pressure in the installation, it will create an EWIS activation and then it cascades. It won't call the fire brigade thou but the building will be in full evacuation. That's the sad part, residents shall be scratching their heads why no fire brigade is coming. It happened to one of my sites before but good thing is I was able to find the problem due to history log. Thnxs Mate.
Hi, I don't know why you need to start manually the pump to increase pressure, it is not automatic?, or the pressure drop was not enough to activate the pump? thank you
I just do it to quicken the job. It does run automatically.
Hello sir where the waters flow in that area? Did you you drain it? Because the pressure is 1500psi
There a drain pipe from level 19 (first solenoid and flow switch line) all the way to the sprinkler valve room. It's painted black.
They joky pump should compensate automatically for the drop in your pressure right?
Sprinkler system with assisted pump to maintain required pressure has no auto jacking pump. Auto jocking pump is only installed to restore loss pressure due to unknown reason. It's not suppose to be use in replacement to a diesel or electric pump mover.
Flow switch is installed wrong, it should be always on horizontal pipe on top of the pipe. Regards.
Sir,can you help me ? We need to siren alarm to be started when flow switch gives signal to the panel (wt6500)
I am failiar with WT6500. But the basic wiring of flow switch is just how you wire a switch light. If your output is the siren, then the flow switch should be connected normally open (conventional system). If your system panel is programmable, it will be easier. Designate a conventional zone to your flow switch and your output in alarm will be the siren.
What is the causes of water flow switch keep alarming?
Active Flow switch indicates water flow. Flow switch identifies the location where sprinkler head burst. No water flow.. some flow switch reset itself..the others , you need to reset it from the Fire panel or EWIS to clear the indication.
Sir pwede niu po ba maidisscuss ung system3 cp30 salamat po first time ko po mag fire alarm tech salamat po
Hi Mate...sorry...i need to know ano ba yung system3 CP30...baka iba ang tawag rito sa Australia.
Parang brand po sya ng siemens..system3 pyrotronics po nka lagay sa label ng unit sir
@@teknesyanraiz9687 ...Ang mga siemens here are Cerberus panel only. I have checked in goggles and that system 3 is not available here in Australia.
Uhm thank you po sir..very helpful ang mga video niu sir para sa mga kagaya ko na electrician biginner dito sa middle east
Simplex is American yeah? I didn't realise they had business in Australia.
They are worldwide. There's a simplex 40U here as well.
Sir meron ba kayo Fb page
Meron..yung other YT ko Ako sa Sydney ...check mo pangalan ko
😚 p̾r̾o̾m̾o̾s̾m̾
Ang delikado lang at maiwasan ang big issue? Kapag habang nasa area biglang magkaroon general alarm... Kaya very important na inform ang fire department Lalo na kung ang area ay naka connect ang alarm signal sa fire department... Naku experience kona yun Ang mapa punta ang Fire Truck, Fire Chief at Ambulance at sasabihin mo Sorry 😂😂😂
Totoo yan. I was doing a test before and then suddenly an unknown alarm activated. I-hold the alarm and ran to the area. Found out it was a burned toast. Luckily, the system is isolated otherwise it cost $1,560.00 per truck charges from fire brigade.
Use jockey
Thnxs. I asked that before and the answer was "is it used in manual or auto mode?"