Stripping and cleaning an old 3 jaw scroll chuck.
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Short video to show cleaning and reassembly of a 3 jaw scroll chuck.
Its an old unit - possibly from the 1950's - and was quite stiff to operate.
After a thorough clean, its back in excellent working condition. - แนวปฏิบัติและการใช้ชีวิต
i got a 5 inch burnerd chuck off ebay last year still in the original packaging covered in that sticky grease what a chuck it was dated 1965 it was really tight at first but loosened up just great with a ;little use
Sounds like a good score - well done.
Alan.
Yes I put a drain cock in my parts cleaner with a filter to recycle the fluid a coupler time before replacing.
Christopher from Queensland
Now that is a good idea. Tipping the tub over to pour the degreaser (Kenco) out is a dodgy business. I used to use the pump to eject most of it but the flow through brush has made that unworkable. I haven't bothered with a filter as I find that a lot of the crud settles out of the drained degreaser in a day or so. Then I just pour most of it back without disturbing the sediment.
A drain cock has just gone on the todo list :)
Cheers, Alan.