+Shane Low | Ya Shane, I only stumbled on it after owning it for a while. I feel Native Instruments' biggest fault is not showing off all the tools buried in their apps.
All you really need is a device that can talk midi, even make one off a keyboard. There are used rig kontrol 3 and 4. If you go for berhing fcb1010, get the uno chip or eurakaprom chip, its all the worlds different. Its easy to install. But you can even use both. I cant understand why Bias fx does not have a looper. I think guitar rig should put down the prices on theyr software because they really begin to lack behind all other software sound vice, but its still usable. Thanks for the video
I haven't touched GR6. Looking at the manual online, looks like they redesigned a lot of it -- all of it? It mentions Envelope has some looping ability. And the Traktor components do some beat slicing, which I'm not familiar with.
Can you use Pedal after you put the live effects on it and connect it to the amplifier and use it with the same effects you set it without connecting to your computer?
So are you saying that everything that is connected to the pedal and is not connected to the computer is not worth it? For example, can't I use the Pedal for a live show?
Brian, I have been trying to get the looper to work on Guitar Rig 5 (full) with a Rig Control 3. The pedal and switches work fine on all other components I have attempted but I cannot get the looper to record. The switch shows Rec/Play/Dub and lights when pressed but has no effect. Any ideas?
My goal is to be able to switch between 2 of the presets with a pedal. I am new to guitar rig so for now I am using the presets just to get used to using it. So for example a song that has a clean-ish intro but then kicks into heavy metal tone, I would use say, Clean Cave then switch to and fro between Big Monster. I am having trouble setting this up. I dont have a pedal so my thought was if I could get the space bar of a keyboard to be the pedal switch, I could for now, put an old usb keyboard on the floor and hit space easily with my foot. could this be done do you think?
Something like that might work, for sure! The software will map keyboard or MIDI channels to any of the main controls. So if you can get any MIDI device and plug it in, it will work. Looks like folks have made DIY foot controllers www.instructables.com/Arduino-Midi-Foot-Controller-for-Ableton-Live/. Or pick up a used midi keyboard with pads, or a pad controller ... and it'll work.
Hi,I can't find the guitar rig kontrollers,maybe the production of these stopped.Can u recommend other pedal controllers who are working on guitar rig??
Hey Andrey, I didn't realize the Kontrol was discontinued, but it seems to have been a while since they decided to kill it. I don't know what's a good replacement. I think most Midi pedal boards should work, as long as you can map the controls which is standard these days. Behringer seems to have a nice, budget model, FCB1010. I currently use a Motu Track 16 which has mic and guitar inputs, but no pedals. It's a great device. I still have the Kontrol for pedal stuff.
All you really need is a device that can talk midi, even make one off a keyboard. But there are used rig kontrol 3 and 4. If you go for berhing fcb1010, get the uno chip or eurakaprom chip, its all the worlds different. Its easy to install. But you can even use both
Hey, Robert, I don't recall anything special about the bass tone here. But generally, I find the most important thing with bass is adding compressor. Find any good compressor and it will add more punch and keep volume consistent. Also if you're trying to fake a bass tone with a guitar, octave effects are good. The GuitarRig one is called 'Octaver.'
I dont know why mi Guitar Rig 5 has the volume down (example 30% instead 100%). I reinstalled the software but its the same....Do you know something about this? I tried it with Mainstage 3 and its good, only happens with Guitar Rig 5
+Digital Ink Arts I hear you! NI makes some very sophisticated stuff, and without official tutorials and instruction, there's only so much we users can figure out.
Hey, glad you liked it. I didn't remember it being anything special, but fortunately it's saved on my machine. It's the Citrus head and matching cabinet; Bass is maxed. And the real key to the sound is the Oktaver effect after that. I have Direct at 12 o'clock; Oct 1 to the max, and Oct 2 shut off bc it's too much to sound natural. You can also play with Octaverb to create a bit of deep reverb.
hmm, tried to do like that, but it sounds like 2 octaves at the same time. I understood right that the Oct 1 is all the way to the right and the Oct 2 is all the way to the left?
That is possible, but it'll depend on the input source. I don't think I would try to use a microphone, for example. You may get better quality signal out of the digital convertor in the Focusrite for that. But for line input, I think it would be good.
they started rebuilding everything in GR a couple years ago. They didn't have any looping for a while, but now there is a new Loop Machine Pro. I haven't used it. And I don't think Rig Control is supported anymore. I think the last version that worked with it was GuitarRig 5.
Thanks, yes i used guitar rig 5 in ableton 10 with rig control 3 under win 11. That was great because it was made for the software and I had all in one controler (which is still in a good condition). The setup does not work anymore. And I dont want to spent time to setup roland or behringer devices. So its also not worth for me to update guitar rig. I have to figure out something more convinient which means more pedals again.
You can store two loops in memory. I find it pretty hard to create both in a live situation -- (you would need two feet to switch to loop B AND hit record-start at the same time). But once you have them stored, you can flip between the two when the looper is in play mode.
Is there any way to do this without the RK3? I am looking to integrate guitar and vocals into maschine. Even if it was done in a different way. I’ve heard of people layering with samples of guitar and vocal parts and building that way (kind of doing verse and chorus-sized samples this way). If anyone has any info it would be greatly appreciated. Have had the MK3 for a while now and haven’t been able to put as much ‘hands on time’ in on it yet. I’m mainly looking to use the maschine along with a daw to create ideas/ live jam and even create whole songs and projects from start to finish using instruments (mainly guitar and bass) and mics for vocal parts. I know this probably sounds like a dumb question, but It’s hard to word it right to search it on google and get an answer to my specific question without actually asking someone who knows what they’re talking about. And the seller (guitar center) was no help when I had these questions for him back when I bought the MK3 about 4 months ago.
Very Informative...I have been using Kontrol 3 for about a year and never even thought to use the looper functions with it..ty very much ! :)
+Shane Low | Ya Shane, I only stumbled on it after owning it for a while. I feel Native Instruments' biggest fault is not showing off all the tools buried in their apps.
**facepalm** I didn't realise there was a looper on Guitar Rig. Thanks for the demo, that was very helpful.
Thanks for the lesson. Simple and easy to follow
+Daniel DeMayo Yes, all the NI stuff works as well on Mac, as on PC, in my experience. Enjoy
I'm interested in what you are using on the guitar to bass preset? Sounds good..
All you really need is a device that can talk midi, even make one off a keyboard. There are used rig kontrol 3 and 4. If you go for berhing fcb1010, get the uno chip or eurakaprom chip, its all the worlds different. Its easy to install. But you can even use both. I cant understand why Bias fx does not have a looper. I think guitar rig should put down the prices on theyr software because they really begin to lack behind all other software sound vice, but its still usable. Thanks for the video
Any idea where is the loop Machine in Guitar Rig 6?
I haven't touched GR6. Looking at the manual online, looks like they redesigned a lot of it -- all of it? It mentions Envelope has some looping ability. And the Traktor components do some beat slicing, which I'm not familiar with.
Brian, thanks bro... .... Much Appreciated
Como configuras cambio de presets next and go back?
Can you use Pedal after you put the live effects on it and connect it to the amplifier and use it with the same effects you set it without connecting to your computer?
Hi. The rig kontrol pedals require a computer. The sounds are in the computer software, not embedded in the pedal board.
So are you saying that everything that is connected to the pedal and is not connected to the computer is not worth it? For example, can't I use the Pedal for a live show?
@@אילוןזלוף You can use the pedal live if you have for example a laptop with you on stage
loop menu on my guitar rig5 is missing, and can not drag from menu too...please help
Tank you.Great Job.
Brian, I have been trying to get the looper to work on Guitar Rig 5 (full) with a Rig Control 3. The pedal and switches work fine on all other components I have attempted but I cannot get the looper to record. The switch shows Rec/Play/Dub and lights when pressed but has no effect. Any ideas?
theres no reason this wouldn't work with mac anymore is there? looking to buy one ;)
My goal is to be able to switch between 2 of the presets with a pedal. I am new to guitar rig so for now I am using the presets just to get used to using it. So for example a song that has a clean-ish intro but then kicks into heavy metal tone, I would use say, Clean Cave then switch to and fro between Big Monster. I am having trouble setting this up. I dont have a pedal so my thought was if I could get the space bar of a keyboard to be the pedal switch, I could for now, put an old usb keyboard on the floor and hit space easily with my foot. could this be done do you think?
Something like that might work, for sure! The software will map keyboard or MIDI channels to any of the main controls. So if you can get any MIDI device and plug it in, it will work. Looks like folks have made DIY foot controllers www.instructables.com/Arduino-Midi-Foot-Controller-for-Ableton-Live/. Or pick up a used midi keyboard with pads, or a pad controller ... and it'll work.
@@bwagner_dev thanks for the reply and advice, much appreciated
exactly what i needed to know, thank you !
Hi,I can't find the guitar rig kontrollers,maybe the production of these stopped.Can u recommend other pedal controllers who are working on guitar rig??
Hey Andrey, I didn't realize the Kontrol was discontinued, but it seems to have been a while since they decided to kill it. I don't know what's a good replacement. I think most Midi pedal boards should work, as long as you can map the controls which is standard these days. Behringer seems to have a nice, budget model, FCB1010. I currently use a Motu Track 16 which has mic and guitar inputs, but no pedals. It's a great device. I still have the Kontrol for pedal stuff.
if you are good with electronics you can use an arduino and make one
All you really need is a device that can talk midi, even make one off a keyboard. But there are used rig kontrol 3 and 4. If you go for berhing fcb1010, get the uno chip or eurakaprom chip, its all the worlds different. Its easy to install. But you can even use both
From where can I DL a nice base sound like yours?
Hey, Robert, I don't recall anything special about the bass tone here. But generally, I find the most important thing with bass is adding compressor. Find any good compressor and it will add more punch and keep volume consistent. Also if you're trying to fake a bass tone with a guitar, octave effects are good. The GuitarRig one is called 'Octaver.'
Yeah...I was talking about faking a bass tone, thanks. I'll try that.
I dont know why mi Guitar Rig 5 has the volume down (example 30% instead 100%). I reinstalled the software but its the same....Do you know something about this? I tried it with Mainstage 3 and its good, only happens with Guitar Rig 5
me ajudou muito amigo, obrigado!
falou cara!
I have had this for over a year and never knew it had a looper. This company needs to tell their customers whats in this thing.
+Digital Ink Arts I hear you! NI makes some very sophisticated stuff, and without official tutorials and instruction, there's only so much we users can figure out.
Maaaan, I really need that fake bass preset :0 Can you somehow upload it somewhere? I will be so thankfull!
Hey, glad you liked it. I didn't remember it being anything special, but fortunately it's saved on my machine. It's the Citrus head and matching cabinet; Bass is maxed. And the real key to the sound is the Oktaver effect after that. I have Direct at 12 o'clock; Oct 1 to the max, and Oct 2 shut off bc it's too much to sound natural. You can also play with Octaverb to create a bit of deep reverb.
hmm, tried to do like that, but it sounds like 2 octaves at the same time. I understood right that the Oct 1 is all the way to the right and the Oct 2 is all the way to the left?
why this pedal not working on fl studio when i used guitar rig 5?
I'm not familiar with FL studio. Most programs allow you to enable or disable midi controllers or USB devices. Is there a way to do that?
I haven't the pedal board^^ How can i use the loop player with my keyboard?
Right click the green button on the looper thing go click learn press any key for me its space
Yes
I wish i could buy that hardware i have to make do with keyboard binds
Can i use gt 1 as audio interface with guitar rig 5? I mean can i replace focusrite audio interface with gt1?
That is possible, but it'll depend on the input source. I don't think I would try to use a microphone, for example. You may get better quality signal out of the digital convertor in the Focusrite for that. But for line input, I think it would be good.
Hey, how did you set up that "Bass sounding" guitar tone?
theres a few premade presets for bass tones on guitar rig that drop a regular 6 string tuning down to bass tuning
VERY GOOD
agreed
and 2024 with guitar rig 7 ?
they started rebuilding everything in GR a couple years ago. They didn't have any looping for a while, but now there is a new Loop Machine Pro. I haven't used it. And I don't think Rig Control is supported anymore. I think the last version that worked with it was GuitarRig 5.
Thanks, yes i used guitar rig 5 in ableton 10 with rig control 3 under win 11. That was great because it was made for the software and I had all in one controler (which is still in a good condition). The setup does not work anymore. And I dont want to spent time to setup roland or behringer devices. So its also not worth for me to update guitar rig. I have to figure out something more convinient which means more pedals again.
@@georgehuss2976 yeah it's a bummer they stopped supporting this stuff. It's crazy what new pedals cost today! Good luck with your setup
What about 'loop a/b'?
You can store two loops in memory. I find it pretty hard to create both in a live situation -- (you would need two feet to switch to loop B AND hit record-start at the same time). But once you have them stored, you can flip between the two when the looper is in play mode.
You're right - thnx a lot!
Is there any way to do this without the RK3? I am looking to integrate guitar and vocals into maschine. Even if it was done in a different way. I’ve heard of people layering with samples of guitar and vocal parts and building that way (kind of doing verse and chorus-sized samples this way). If anyone has any info it would be greatly appreciated. Have had the MK3 for a while now and haven’t been able to put as much ‘hands on time’ in on it yet. I’m mainly looking to use the maschine along with a daw to create ideas/ live jam and even create whole songs and projects from start to finish using instruments (mainly guitar and bass) and mics for vocal parts. I know this probably sounds like a dumb question, but It’s hard to word it right to search it on google and get an answer to my specific question without actually asking someone who knows what they’re talking about. And the seller (guitar center) was no help when I had these questions for him back when I bought the MK3 about 4 months ago.
Great !!!
+Gustavo Fraga Thanks. You play much guitar through Guitar Rig?