ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
0:00 | Introduction0:48 | Create Corridor surface and apply boundaries 4:40 | Generate points at Road Edge7:48 | Apply Elevation and Descriptions to Points12:26 | Import Points with descriptions
Sir I want to draw point both side on surface alignment at fix interval, (ex: 0, -5 ,-10, -15, -20 and 5,10,15,20,) at every station perpendicular.After draw I want this report in Excel In format station offset. Elevation.Thanks
You can create points using method shown in video......and extract all point from C3D to Excel......
Nice sir,Still both side superelevation text with arrow, is missing.
I send you procedure for that on LinkedIn. Let me know if that is not clear. I will create separate video for that.
facebook.com/Autocad-Civil3D-Tricks-Tips-102098738311213/
0:00 | Introduction
0:48 | Create Corridor surface and apply boundaries
4:40 | Generate points at Road Edge
7:48 | Apply Elevation and Descriptions to Points
12:26 | Import Points with descriptions
Sir I want to draw point both side on surface alignment at fix interval, (ex: 0, -5 ,-10, -15, -20 and 5,10,15,20,) at every station perpendicular.
After draw I want this report in Excel
In format
station offset. Elevation.
Thanks
You can create points using method shown in video......and extract all point from C3D to Excel......
Nice sir,
Still both side superelevation text with arrow, is missing.
I send you procedure for that on LinkedIn. Let me know if that is not clear. I will create separate video for that.
facebook.com/Autocad-Civil3D-Tricks-Tips-102098738311213/