Mini Cooper Rear Hatch Switch Replacement 2005 - 2015

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ส.ค. 2024
  • Replace the rear hatch switch on a hatchback Mini Cooper 2005 - 2015 R56 R57 R58 R59 R60 R61.
    To Get The job Done:
    -Complete Switch Handle Ready to use (Chrome): amzn.to/41lJfT8
    -Complete Switch Handle Ready to use (Black): amzn.to/3obpfnK
    -Socket set: amzn.to/3iBeuDk
    PROTECTIVE GEAR:
    -Face Masks: amzn.to/3D0zCiW
    -Safety Goggles: amzn.to/3fZQfNq
    -Safety Goggles (2-Pack): amzn.to/2PX2eR5
    -Ear Protection Ear Muffs: amzn.to/3QOBMrq
    -Ear Plugs: amzn.to/3CZJHfR
    -Shop Gloves: amzn.to/3aGzAgV
    -Nitrile Gloves (6-mil): amzn.to/3awjyWQ
    Other Mini Cooper Videos:
    -Mini Cooper Replace Manual Transmission & Differential Fluid: • Mini Cooper Manual Tra...
    -Mini Cooper Windshield Cowl Replacement/Broken Battery Hatch: • Mini Cooper Windshield...
    -Replace Parking Light Bulbs for Dash Warning: • How to Replace Mini Co...
    -Replace Mini Cooper Antenna: www.youtube.co....
    -Replace Mini Cooper F-Series Wheel Bearings: • Replace Wheel Bearing ...
    → Become a ScubaMoto Subscriber - goo.gl/iAwSQc
    → If this video helped, please give a thumbs up and subscribe for future videos
    → As an Amazon Associate I earn from qualifying purchases at no extra cost to you. Win!
    → Business Inquiries email: scubamoto@outlook.com
    → Support this channel - goo.gl/iAwSQc

ความคิดเห็น • 31

  • @byronn.2885
    @byronn.2885 6 หลายเดือนก่อน +3

    My daughter just bought a used 2007 Cooper S. It has the exact same issues. This will be the first thing I will deal with. It needs a good bit of TLC. Thanks for the video.

    • @ScubaMoto
      @ScubaMoto  6 หลายเดือนก่อน +1

      Glad you liked the video. Good luck with all that TLC.

    • @byronn.2885
      @byronn.2885 6 หลายเดือนก่อน +1

      @@ScubaMoto Just installed the new latch/handle last night. Solved the issues and she’s happy that she doesn’t have to keep jumping out and closing the hatch every time she starts the car. Thanks again.

    • @fabianavalos1386
      @fabianavalos1386 6 หลายเดือนก่อน

      Any oil leaks?

    • @byronn.2885
      @byronn.2885 4 หลายเดือนก่อน

      @@fabianavalos1386 nothing significant so far.

  • @mikemcelveen2973
    @mikemcelveen2973 ปีที่แล้ว +3

    Helped me tremendously! Thanks

    • @ScubaMoto
      @ScubaMoto  ปีที่แล้ว

      Glad it helped. Thanks for the comment.

  • @dumptodreamhome2630
    @dumptodreamhome2630 ปีที่แล้ว +1

    Appreciate the Mini Videos. I have to replace thr front Cowl and rear hatch latch on my 2013

    • @ScubaMoto
      @ScubaMoto  ปีที่แล้ว

      Glad to help. Good luck with the replacements and thanks for the comment.

  • @JHickmanIII
    @JHickmanIII 10 หลายเดือนก่อน

    Thank you, very informative

    • @ScubaMoto
      @ScubaMoto  10 หลายเดือนก่อน

      Glad it was helpful. Thanks for the feedback.

  • @bebichon
    @bebichon ปีที่แล้ว

    I appriciate the video!

    • @ScubaMoto
      @ScubaMoto  ปีที่แล้ว +1

      Glad it helped. Thanks for the comment.

  • @johnhall8455
    @johnhall8455 10 หลายเดือนก่อน

    Excellent vid….thanks..👍

    • @ScubaMoto
      @ScubaMoto  10 หลายเดือนก่อน

      Glad you enjoyed it. Thanks for the feedback.

  • @mikebashaw2411
    @mikebashaw2411 6 หลายเดือนก่อน

    What do the 4 screws actually screw into? The brackets have small rubbberlike inserts that do not really give a securely attached feeling and the screws dont snug up tightly. Is there any resolution to the unsnug screws?

    • @ScubaMoto
      @ScubaMoto  6 หลายเดือนก่อน

      The four screws go into what is called a Plug-in-Nut. It's plastic. Search P/N 51137416329 These types of body nuts are typical of most vehicles. If a previous owner over-tightened it, the plastic threading may have stripped. The plastic may also have become brittle and simply cracked. First confirm that the screws are centered by trying each screw without the handle in place. If the plug-in nuts have loosened up but are not broken, you might get by with a larger screw or insert a short length of thin zip-tie along side the original screw to tighten it in the nut. If the plug-in Nut is broken, then confirm the part number I gave above is for your vehicle model and year and replace as necessary.

  • @kw20924
    @kw20924 3 หลายเดือนก่อน

    I’m struggling finding 4 screws on the f57! Do you know how the ones after 2017 are attached?

    • @ScubaMoto
      @ScubaMoto  3 หลายเดือนก่อน +1

      The F-Series unscrew from the inside. 2015 was the transition year. Pop off the interior hatch card and it's held on with Torx screws that you remove from the interior side of the hatch.

    • @kw20924
      @kw20924 3 หลายเดือนก่อน

      @@ScubaMotothank you so much for such a fast response on this!!

  • @kellyb1687
    @kellyb1687 6 หลายเดือนก่อน

    Great video. Minis are junk though. At least mine is.

    • @ScubaMoto
      @ScubaMoto  6 หลายเดือนก่อน +1

      In the end, cars are all junk until we fix them. BMW just likes to keep us busy. Great job on the repair.

  • @fritzkreig1314
    @fritzkreig1314 4 หลายเดือนก่อน

    Hi so a replacement on eBay will work? I asked a guy who had one on there and he said it wouldn't.

    • @ScubaMoto
      @ScubaMoto  4 หลายเดือนก่อน +1

      The piece in the video is still working great and it has also dropped in price considerably since the after-market supply is competitive. We also confirmed fitment for our R56 before the purchase. Most vendors selling these have good ratings and a good return policy in case there is an issue. You could choose to buy direct from MINI using your vehicle's VIN for absolute certainty. We have no inventory of these nor any relationship with the vendors linked in the video description. The links are there for convenience. We simply make an effort to find sellers and items with good ratings. Commissions occur under certain conditions and do not affect price. If people report consistent issues with one, we switch to another vendor. I always recommend keeping everything needed to return items in case of defects or fitment issues.

    • @fritzkreig1314
      @fritzkreig1314 4 หลายเดือนก่อน

      @@ScubaMoto thanks! i don't think I explained it very well to the ebay guy. I am going to get one and try it out. Thanks!

    • @ScubaMoto
      @ScubaMoto  4 หลายเดือนก่อน +1

      If the vendor says it won't work, I would definitely try another vendor. Once they say it won't work, you've lost your return option. Good luck with it.

    • @fritzkreig1314
      @fritzkreig1314 4 หลายเดือนก่อน

      @@ScubaMoto thanks. I'm going use your link because it's the same problem I think. It pops open randomly. It stays closed but unlatches

    • @ScubaMoto
      @ScubaMoto  4 หลายเดือนก่อน

      That does sound like a stuck hatch switch button just like the video. The button switch was stuck depressed. You could keep it closed by resetting the lock mode with the key fob since the ECU responds to the hatch button in a toggle manor. I don't know what year you're working on, but just make sure the hatch handle/switch you buy is compatible with your vehicle year/model.