FOR ANYONE STUCK ON GETTING THE MOTOR ROD (PART F) TO FIT Try loosening some of the hex screws on the legs of part B and A. This allows you to wiggle the legs around rather than the rod so that you can get a good fit.
I have been stuck on this step for quite some time now. I tried loosening the hex screws but that did not help. Not sure if I undid the right hex screws.
What do you suggest if the motor rods don’t “line up perfectly” I have tried with force to adjust the motor rod but the pieces aren’t even close to lined up
Is the LED supposed to constantly be on display? Mine is currently at 99 and it shows the number the entire time. I thought it was suppose to go away after some time.
you're my hero!!! you literally walked me through step by step I never put together things I suck at it!!! thanks thanks thanks subscribing and liking!!!! #GirlPower Thanks Again
What do you suggest if the motor rods don’t “line up perfectly” I have tried with force to adjust the motor rod but the pieces aren’t even close to lined up.
Try loosening some of the hex screws on the legs of part B and A. This allows you to wiggle the legs around rathee than the rod so that you can get a good fit.
Whether you think I'm lazy or wise, the video instruction is so much better!
Mine went together perfectly. I watched this video, then followed the assembly directions. Hope it gives long life.
Very helpful video. Assembled entire desk and worked perfectly!
FOR ANYONE STUCK ON GETTING THE MOTOR ROD (PART F) TO FIT
Try loosening some of the hex screws on the legs of part B and A. This allows you to wiggle the legs around rather than the rod so that you can get a good fit.
howw
@@storybored3 yo you still working on this? I could hop on a call woth you and help if you want. I remember how frustratig this was
I have been stuck on this step for quite some time now. I tried loosening the hex screws but that did not help. Not sure if I undid the right hex screws.
@@whatamitalkingabout3im stuck on this rn can you help?
@@sha2paid sorry man I buult it so long ago i have no idea anymore
My legs came uneven and I can’t adjust it. The desk is tilted. What do I do?
Thanks for posting! I lost the directions to put together this desk after a move & this was what I needed!
What do you suggest if the motor rods don’t “line up perfectly” I have tried with force to adjust the motor rod but the pieces aren’t even close to lined up
Same here. I just put it together. Now only one side of the desk lifts up. Did you figure it out?
@@rezco7190 Same
I am facing the same issue. did you get solution ?
@@99tanuj was a while ago. I think took it back apart and did the steps prior but not in the sequence they laid out in the manual.
Is the LED supposed to constantly be on display? Mine is currently at 99 and it shows the number the entire time. I thought it was suppose to go away after some time.
you're my hero!!! you literally walked me through step by step I never put together things I suck at it!!! thanks thanks thanks subscribing and liking!!!! #GirlPower Thanks Again
The video helped me to set up my desk perfectly. Thanks for the video!
The package came with just one (1) part D. Where is the other one?
Very good instructional videos. I'm going to get one and follow your instructions for assembling. Thanks.
Does this model have collision detection?
Hi! Which color is this desk showing in?
Excellent instructional video!
Thanks for watching! -TK
omg thank you, very helpful and made it easy.
This will be my new desk
Any idea how to change the LED display to show the height in inches?
Do you have the model number of the motor? I need a replacement but company won't send a motor.
I get ER1 how can I fix this?
Raised one side too high how do I fix
Can you replace the rubber feet from the legs and replace them with caster wheels ?
They are not included but this is a possibility. You will be sacrificing more stability by adding casters though. - RG
@@btodtv hello i have the top table only and i need the stand, cables, power supply do you have any info like number where i can order them? please?
Thanks for the video.
what's the dimension for the frame?
What do I do for the error E-3? I just assembled it and it will not move at all, and nothing is on it.
do you have a number of SWH? i need parts maybe u still got boklet where to call them please?
this vid doesnt work for the new models
First screws were not “N”
Is anyone else's stuck on "69" and won't Zero out?
Did you ever figure this out ?
What do you suggest if the motor rods don’t “line up perfectly” I have tried with force to adjust the motor rod but the pieces aren’t even close to lined up.
@dresupreme I am facing the same issue. did you get solution ?
Try loosening some of the hex screws on the legs of part B and A. This allows you to wiggle the legs around rathee than the rod so that you can get a good fit.