Love that reverberating ring when it opens. That makes this knife so awesome. I now want all my knives to have a musical tone. Ideally, I could play a song if I had them tuned properly. Like hand bells, but knives.
I'm so glad someone finally disassembled the damn thing thank you nick! I've been dying to see the inside of this thing just to see how far outside the box the design truly was and it's on another level of engineering and design very impressive to say the least!
Winterblade co put out a disassembly video last week. He likes to slide the scale back on to keep the lock and washer in place to avoid them getting pulled into the magnets.
What an amazing new way to approach a pocket knife. Really cool idea. Magnets are showing up all over the place. Wow! Perhaps the blade is proud to one side because of the magnet. 🎃
I use sponge tipped q-tips and put a drop of oil on them to paint my oil on my knives, and my guns also. It's way easier to control and put oil at exact locations
@@brendenw6423 it’s actually not considered an auto even by California law. It’s no different to an assisted knife since it still requires manual force to open (detent)
@@Muscovy7 the law as interpreted by any given law enforcement officer or judge may or may not be the same. I'd imagine you'd have no issues the majority of the time, but it only takes one bad time to screw you over
@@E1337N3SS yea, if a cop really wants to waste everyone’s time with litigation, you’re right but honestly, if it goes to court you could probably sue the city.
Lol I find it the easiest when putting it all together.. to do it on something very soft for the under side like a pc of foam to give the button a little cushion... it just makes the whole process a little easier....
I love this knife and its unique design, but if I were gonna disassemble it very often, I’m pretty sure the magnets would drive me to drink. Laughed a lot through this video.
Really like this design. I just don't have the kind finances that would allow me to buy jewelry that has no real value. Neat is enough for me to spend $400 on something I'd never use. Most be nice I can't afford gas. Let alone pocket jewelry.
Gosh damn... u are scratching knives with ur torx bits... just scratching all over... u need to be more careful... watch how careful MC is with knives.... take note. I would NEVER send one of mine to you (it would come back damaged).... I have no problem sending to MC... he cares about the knife
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
Love that reverberating ring when it opens. That makes this knife so awesome. I now want all my knives to have a musical tone. Ideally, I could play a song if I had them tuned properly. Like hand bells, but knives.
This is pretty cool to see, thank you for sharing! 💯🔥🙌🏼
That looks really good, and honestly that ringing when you open it… my inner child can’t help to imagine it is some sort of sword being deployed
Has to go back and check your video again in order to put mine together😂 thanks Nicolás
Love that "SCHWING!" when the blade opens!
I'm so glad someone finally disassembled the damn thing thank you nick! I've been dying to see the inside of this thing just to see how far outside the box the design truly was and it's on another level of engineering and design very impressive to say the least!
Great job! Hope to get one next week. Thanks for the demonstration!👍🏻
I haven’t really been watching much EDC/knife content and I forgot hot funny/cool guy you are. 😂
Winterblade co put out a disassembly video last week. He likes to slide the scale back on to keep the lock and washer in place to avoid them getting pulled into the magnets.
I love this knife. I will likely never even hold one. But I love it.
The M1 Garand Knife! PING!!!
Best sounding acoustics of any knife made to date!!!
Ohhh thank you! Had hoped you'd get one to review! So much! Very appreciative here! Got my alarm set, and hope to get one of the first 200 pieces!
Did you?
What an amazing new way to approach a pocket knife. Really cool idea. Magnets are showing up all over the place. Wow! Perhaps the blade is proud to one side because of the magnet. 🎃
I commend your restraint in oil application for this disassembly! I imagine that was a pretty jarring experience
I'm so exited to get this in hand.
I'm going to start the Winterblade Co. Barbershop quartet and use the knife to find our notes. I swear that's perfect A.
Such a cool design. I must have one.
It's a polarizing, attractive design. Expecting a both positive and negative review. I'll see myself out. 🤸♂️👉🚪
Is that the blue??? Looks different than the blue on the site if it is. Please let me know so I can decide on a color
kool vidio cant already bought one cant freaking wait .
Mechanical friction replaced with magnets. I look forward to either the electronic, or light powered knife.
I am working on one but it requires antimatter to run properly. Batteries not included.
I use sponge tipped q-tips and put a drop of oil on them to paint my oil on my knives, and my guns also. It's way easier to control and put oil at exact locations
The ping sound when you open the knife is addicting
The opening ring makes me excited in ways I don’t understand
Looking forward to it, drop is scheduled for the 31st from his last post.
Ordered 2 last night and thinking about another...
Why would you want to replace the flipper bar with a non-flipper???
auto laws in california
@@brendenw6423 it’s actually not considered an auto even by California law. It’s no different to an assisted knife since it still requires manual force to open (detent)
@@Muscovy7 i'm giving the reason stated at 4:44 in the video.
@@Muscovy7 the law as interpreted by any given law enforcement officer or judge may or may not be the same. I'd imagine you'd have no issues the majority of the time, but it only takes one bad time to screw you over
@@E1337N3SS yea, if a cop really wants to waste everyone’s time with litigation, you’re right but honestly, if it goes to court you could probably sue the city.
wat does the black carbon fiber thing do that u put in changed out thks
I need more ting in my life. Hope I get a spot on the Pre order.
Did you?
Using all titanium hardware would fix the magnet-related challenges of reassembly
Have done a review on this yet?
Is the pocket clip reversable? Looks like it should be.
Yes
Lol I find it the easiest when putting it all together.. to do it on something very soft for the under side like a pc of foam to give the button a little cushion... it just makes the whole process a little easier....
Looks like it needs titanium hardware to make it a touch easier
Exxon Shabazz has finally succumbed to the skyrocketing price of oil.
Ahhg I don't WANT this knife, but damn do I want to just handle it for a little while!
first time ive seen a pocket knife with magnets in it!
Is this considered an assisted knife? Is it legal in Canada?
You want a lawyer, not a TH-camr
Probably not since it's a socialist crap hole lol
It went a lot smoother than the crktritual
Can you remove the magnets?
Yes
I love this knife and its unique design, but if I were gonna disassemble it very often, I’m pretty sure the magnets would drive me to drink. Laughed a lot through this video.
TIIIIING!
All that function and only 36 magnets!
TING!
Magneto made this knife.
New business proposition nick shabazz owned quarters for $5
Really like this design. I just don't have the kind finances that would allow me to buy jewelry that has no real value.
Neat is enough for me to spend $400 on something I'd never use.
Most be nice I can't afford gas. Let alone pocket jewelry.
Thank biden
Gosh damn... u are scratching knives with ur torx bits... just scratching all over... u need to be more careful... watch how careful MC is with knives.... take note. I would NEVER send one of mine to you (it would come back damaged).... I have no problem sending to MC... he cares about the knife
This is the least amount of oil I’ve see Exxon Shabazz use 🫣 Edit:100usd of the knife price is the assembly labor lol!