Ok, but will I be able to update the firmware when a new one comes out with this unlocked controller? The controller sold on Aliexpress does not update. Is this one any different?
Question, if your max g2 only goes into ECO mode but cannot go into any other speeds but you want your scooter to be faster does that mean you have to change your Controller assembly or the battery?
Yes makes sense, that its not showed that its actually goes to 35km/h. But it goes then you swap controller to unlocked one with USA serial number. Now thare also 40km/h version available! :)))
I recieved mine yesterday, today i installed the new controller. Everything went fine, i installed the ninebot app ,registered the step. I can change the slider till 40km/u in the app, but step only goes 30km/u max?
i m not much interested in speed but i need the cruise control enabled like in us version. I st linked a g30 to get the cruise control by changing region and serial. Are these controllers already set to us version and cruise control enabled in the ninebot app?
tai gi kas mokat viską patys pasidarot ir pigiai :) o yra kas nemoka tai ir perka kad jau paruošta būtų :) puiku vieta konkurencijai, įkurkit įmonę ir viską darykit pigiau :))
Still have problem? did you connect everythign right? As we sold 100+ controllers, we test all of them before sending, so it must be working :) did you really bought from us?
Yes, it is bought from you. Not working. Does not see start button. when I connect the plug it lights up briefly for 3 seconds and then goes out and doesn't light up anymore. The old one works. I sent the video by email but I have not received a reply yet
No its diferent controller. Also G30 have two types of controllers, the older ones can be hacket even to 50km/h :) but it requires to change the connectors to motor :)
You need to know the pasword or just change the screen to new one.www.shift.lt/en/spare-parts/1022-original-dashboard-assembly-for-ninebot-kickscooter-max-g2-electric-scooter-display.html
Is there a way to unlimit Ninebot F2 plus? With the new update it no longer allows you to do it with xiaodash by changing the fourth digit. Some light please, thank you!
Hello, so probably its the same as for G2, just replace controller with onlocked one, or buy a new from factory ant change fourh digit to "S", so it will be global version :)
@@bernadettenitcheu5465 you ordered new controller from factory/aliexpres which is not prepared to use out of the box. 35 error means its factory SN, so you neeed to use scooterhacking change SN to yours whic you can find on frame :)
#Shift lt Hello, after replacing this controller, you need to enter the original application and pair the scooter again until it is detected under a different serial number and connect it and then it is already unlocked and you can increase the speed in the application to 35??
I already bought this controller and tried this. It doesn't work, it says the serial numbers do not match once I open the app and try to register the scooter..... scam
Can we after replacing with new controller and changing the serial with xiaodash is it safe to connect to official app and do the updates ? I mean it won't effect the changed S/N and limit it to 25km/h again?
so I've tried this and once you replace it the scooter will start beeping the same way it does once you run it for a first time and will not start until you register it with the app. If you try to register it with the app it will tell you that the serial numbers do not match and you have to pop your old controller in as this does not work!
Its not that hard, as all connections ant plugs are different, so just unplug from one ant plug to other :)) but yes it takes some time :) But nothing really hard :) Its easier to bring scooter to scooter service center and pickup then its done :)
I have changed my controller but the problem now is that my scooter is showing error 35, I tried to reset to factory setting in order to connect to Xiaodash, but I still can't change the region, I tried to put the code of my previous scooter which was unlocked but it didn't work, any idea of to solve this, please?
![[ ออกกอง ] วัยหนุ่ม 2544 โลกหลังลูกกรง..ทัวร์กองถ่ายหนังใน "คุกของจริง" | JUSTดูIT.](http://i.ytimg.com/vi/vB--aOkZCpw/mqdefault.jpg)
Ok, but will I be able to update the firmware when a new one comes out with this unlocked controller? The controller sold on Aliexpress does not update. Is this one any different?
Are you suppose to disconnect the battery first -for safety?
YEs.
Нужно ли менять серийники черер xiodash или прочие софтины, или достаточно только поменять контролер ?
Question, if your max g2 only goes into ECO mode but cannot go into any other speeds but you want your scooter to be faster does that mean you have to change your Controller assembly or the battery?
very good video. can you make a video showing how to replace the internal power supply?
its very similar, after you remove the controller, you need to uscrew the charging plug and then you can easily replace internal charger ;)
I was looking this to see does this controler work, what will i get, but except seeing how to untighten/ tighten screws, nothing...
Yes makes sense, that its not showed that its actually goes to 35km/h. But it goes then you swap controller to unlocked one with USA serial number. Now thare also 40km/h version available! :)))
Don’t understand. It goes 22mph out the box after a single ride. Is it more restricted outside the USA?
yes, in european version top speed is 25 kmh, in german 22kmh
I purchased a new controller, what software should I use to change the serial number? iOS
iOS its not for hacking. There are no apps on iOS sorry.
I recieved mine yesterday, today i installed the new controller. Everything went fine, i installed the ninebot app ,registered the step. I can change the slider till 40km/u in the app, but step only goes 30km/u max?
What about sealant? Did you apply it after?
i m not much interested in speed but i need the cruise control enabled like in us version. I st linked a g30 to get the cruise control by changing region and serial. Are these controllers already set to us version and cruise control enabled in the ninebot app?
If I'm on the latest firmware all I need is to replace the controller or do I also need to change some settings to unlock the speed?
Replace the controller.
Enlace de compra de la centralita?? Gracias un saludo
What torx did you use?
torx 15
Yeah i bought a torx set swapped it allready😊
erm what screwdriver you are using i cannot find it could you please help
Does this work with /master 1.11.1 Bluetooth 1.11.0 Battery 1.7.5.5 ????
108.90 eur cia kaina uz tai kad atvezate preke i namus, atvezat alaus, patys pakeiciate, aplaistot su klientu ir duodate 2 metu garantija ?
hahahahahaha, just buy STLINK for 10 euros, and do it urself so easy man, this is crazy 100 euro
tai gi kas mokat viską patys pasidarot ir pigiai :) o yra kas nemoka tai ir perka kad jau paruošta būtų :) puiku vieta konkurencijai, įkurkit įmonę ir viską darykit pigiau :))
I bought from you this controller and not work. Dont see power button when i try to start.
Still have problem? did you connect everythign right? As we sold 100+ controllers, we test all of them before sending, so it must be working :) did you really bought from us?
Yes, it is bought from you. Not working. Does not see start button. when I connect the plug it lights up briefly for 3 seconds and then goes out and doesn't light up anymore. The old one works. I sent the video by email but I have not received a reply yet
What’s the link to buy this product
if from aliexpres: s.click.aliexpress.com/e/_Dl9ag4n
if from EU: www.shift.lt/en/ninebot-max-g2-spare-parts/1021-controller-for-ninebot-kickscooter-max-g2-electric-scooter-motherboard-original.html
I recived and its f* good. One q. The yellow c. A put it under mother board its that ok?
Is there is any possibility we use that g2 controller on ninebot G30?
No its diferent controller. Also G30 have two types of controllers, the older ones can be hacket even to 50km/h :) but it requires to change the connectors to motor :)
Hola tengo un ninebot kick f2 está con contraseña si le cambio el controlador se desbloquea?
Como desbloqueaste ?
Hi. I bought used display for my ninebot Max G2 but I can't connect to it probably of code. Have you any idea how to reset or remove this code?
You need to know the pasword or just change the screen to new one.www.shift.lt/en/spare-parts/1022-original-dashboard-assembly-for-ninebot-kickscooter-max-g2-electric-scooter-display.html
Can I do that om segway p65e ?
Yes, but ant P65 its more comlicated
Is there a way to unlimit Ninebot F2 plus?
With the new update it no longer allows you to do it with xiaodash by changing the fourth digit.
Some light please, thank you!
Hello, so probably its the same as for G2, just replace controller with onlocked one, or buy a new from factory ant change fourh digit to "S", so it will be global version :)
does this work with g30d 2 ?
you need different controller ;)
i tried this and get an error 35 code with beeping, not sure what to do now.
Did you fix it?
@@bernadettenitcheu5465 yeah, it was a faulty controller I got another and works perfectly
@@bernadettenitcheu5465 you ordered new controller from factory/aliexpres which is not prepared to use out of the box. 35 error means its factory SN, so you neeed to use scooterhacking change SN to yours whic you can find on frame :)
Does it really work? Just simply replacing the controller and then you can run it to 35kmh?. Or still you have to register it once again in the app?.
Enough just to replace. Now its new controllers, they go up to 40km/h :)
@@TomasValaitisDrfrom where we can order the New controler
#Shift lt Hello, after replacing this controller, you need to enter the original application and pair the scooter again until it is detected under a different serial number and connect it and then it is already unlocked and you can increase the speed in the application to 35??
Yes
I already bought this controller and tried this. It doesn't work, it says the serial numbers do not match once I open the app and try to register the scooter..... scam
You need to change the serial number to the one that's on the bottom of the scooter using SHU app.
@@borky1987 I'll give it a try tomorrow. Hope it works and thank you for the response!
А где это приложени искать
@@dobroslavgeorgiev8376получилось???
@@Максим-з3щ7у ниет. Serial numbers still don't match scooter is beeping and doesn't want to run.
50€ on aliexpress btw
Link please 🙏
Link please 🙏
@@TheDenis675 s.click.aliexpress.com/e/_Dl9ag4n
Theres even a 40kmh version for 70€
Where is unlock process, this is not unlock, its how to replace controller ??!!
Can we after replacing with new controller and changing the serial with xiaodash is it safe to connect to official app and do the updates ? I mean it won't effect the changed S/N and limit it to 25km/h again?
so I've tried this and once you replace it the scooter will start beeping the same way it does once you run it for a first time and will not start until you register it with the app. If you try to register it with the app it will tell you that the serial numbers do not match and you have to pop your old controller in as this does not work!
I see' plug n play doesn't seem to work since you have to register it once again'?.
@@dobroslavgeorgiev8376 you have to unbind it from the ninebot app first, than bind again with new controller
You don't deliver to United Kingdom :(
i unlocked mine in 2 minutes without undoing a screw BLE scanner off play store s22
35kmh
We deliver to all the world! just write of if there no shipping option in cart. ;)
Cancelled my order after I saw this video.. 😢
Its not that hard, as all connections ant plugs are different, so just unplug from one ant plug to other :)) but yes it takes some time :) But nothing really hard :) Its easier to bring scooter to scooter service center and pickup then its done :)
@@TomasValaitisDryou are Greek?
@@TheBIGsokinNo, Lithuanian :) but i was told then i was in Greece that its like greek
i unlocked mine in 2 minutes without undoing a screw BLE scanner off playstore s22
7:00
我有40KM/H的控制器
I have changed my controller but the problem now is that my scooter is showing error 35, I tried to reset to factory setting in order to connect to Xiaodash, but I still can't change the region, I tried to put the code of my previous scooter which was unlocked but it didn't work, any idea of to solve this, please?
If there is any place in germany that I can come and you can help me guys will be good 🤑
128 euros,? Haha 😂 and only until 35kmh
up to 40km.h :) there is chealer optoion from aliexpress: s.click.aliexpress.com/e/_Dl9ag4n
No go!!!! Loss of warranty! Loss of driving license and high fine!! ⛔️
Does he believe that people can see what he is doing correctly 🤣🤣
No go!!!! Verlust der Garantie! Verlust des Führerscheins und hohe Geldstrafe!! ⛔️
😂😂😂😂 weiter verarschen 😂😂😂
?
Why not just change the country to USA? You get your 35km/h that way. No hardware necessary.
It doesnt work on european nought scooters. If it is universal bought then yes but not if like to germany specially you get it?
@@jaakkohartikainen1992 Ther is another version ? Spain with no limit?
it doesnt work like that, here in Europa you can't change anything, incl region selection
What countries does this work with? Australia?