Enormous Respect for the Brothers! In most videos they come across as just two fun, happy-go-lucky guys, but with this video I have discovered they are in fact very determined, earnest engineers who will NOT quit until even the sketchiest and poorly equipped model finally files right. Big, Big salute to Pilot Robert & Captain Blaz!!! Kudos and respect!
You said it so beautiful my friend. I will always consider myself as amateur pilot and RC plane lover but I do like to think about the planes a lot and about their enginnering. And the more problems the plane gives me the more Iam determined that I will fly it no matter what 😊 Even if I crash it totally trying. As long as I have something to fix and glue together. I almoust thought that the story with this plane was over after third attempt when the whole nose of plane was gone in pieces and the wings broke from the plane. And then when I was searching for pieces in the grass I said to myself that I will fix it and try so long that it will fly so help me God. Big salute from Slovenia and thanks for support.
After your first try I started trying to find other videos of this plane. Rob, everyone has had trouble flying this plane and you're the only one I've seen to get it to fly nicely. Kudos!
Crazy ride Lauren but at the end Iam happy the bird was in the air. Its interesting, that the more problems I have with the plane the more I want it to fly good.
@@PetrincicBrosRC Ohh Yeahhhhh..Salute.. Yesterday I also modified my motor angle (down / right) to 5 degrees using washers as a solution. that seems to be the solution when I see your video. The servos are really weak. a servo broke while programming. 9gr. Servos with higher quality and you are on the safe side. Extraordinary to get the bobber safely back on the ground with such a rash. Respect.
@@olafshangar6223 With washers and good servos one could have fun with this plane. Its even more interesting to me becouse of all the problems. Somethimes I love chalanges like this bird. Will come and check your video my friend. I have heared about it. Big salute from Slovenia.
@@PetrincicBrosRC Salute from Germany. When the weather gets a little better again (60kmh wind), I'll test the changes and see what's in the little bobber. In my first video it was 12-13kmh wind. perfect for leaving you almost in the air with little use of the engine. use the flaps .. also at the start, this increases the lift.
After watching many TH-cam videos on the little bird. Your advice has paid off. My bobber flew first time no issues. Two small washers pushing the motor to the right works. Thank you for your sound advice.
Really glad to see this little plane fly I thought it was a really good-looking your persistance in getting it flying finally worked oh yeah and I got to give you credit Captain Robert you don't give up very easily
Maximum respect to Petrincic Aviation for finally getting this patchy plane in the air! There are many better birds than this, but there's only one RC channel for total fun. Big salute as ever from London.
Big Salute for getting the Bobber in the air! The three videos of this plane and the four (I think) of the Bushloader are some of your most interesting because they showed the process you went through to get them to fly. This is good instruction for new players and old heads alike. Thanks to you and Capt'n Blaz for making these videos! (NC/USA)
This just reinforces the old sayings,, if at first you don't succeed try, try again and the third time's a charm. Third video is what I mean. My favorite brothers never give up. Hat's off to you both! Big salute from Chicago! Oh yeaaah!
Thanks for kind words my friend. Maybe I will really have to start to sell them since I dont have my company anymore, but I really dont want to. They are like my friends and family. And also here in Slovenia you get nothing for second hand plane.
Thanks my friend. I think we will test this bird even more in the future when I will have time. Have a few more ideas to make it fly even better. I hope 😉
Congratulations Pilot Robert and Captain Blaz on your hard work and victory in finally flying this plane successfully. Your tenacity in continuing to work with this plane is fantastic!
FINALLY THE OFFICIAL MAIDEN! CONGRATULATIONS Capt. Robert! It was a big effort, but you got it right! Still it needs some improvements, but it FLIES! Thank you boys for your video, GREAT! Regards, George
Dis is it my friends. Big salutes Captain Robert and Captain Blaz, munted swervoes will do it every time. Landing, 10/10, dat was it, almost in the car. Salutes again, dat was something hey?
Great zooming CPT Blaz, great job of filming the Savage Bobber. Way to fly Pilot Robert. This is a hobby, this is my hobby, I do this hobby for fun. That little saying really works when you want to stomp or throw a plane that your having problems with or getting something to work. Fun one, Salute, Jeff in LA USA
Fantastic !!! 4th time lucky fella's I knew in my heart that you would get there and you were lucky to get it down in one piece on those servo's !!! 🙈 keep up the good work 👌
Robert, respect that you never give up. Such videos are interesting as well as a bit thrilling. Like as for example also with SR71 Impeller, you finally succeeded. Big salute!
Planes like this really atracts me becouse I want to figure out what is wrong and solve the problem if I can. Its like Iam helping the plane to fly becouse it really wants so bad. That is why I dont sell any. I look at them as my friends, my family. Really.
GOOD MORNING MY FRIENDS. IM SO HAPPY FOR YOU ROBERT. I KNEW THAT YOU WOULD GET THIS PLANE TO FLY. CONGRATULATIONS ON YOUR DETERMINATION TO GET THIS BABY TO FLY. THANKS FOR FILMING BLAZ'.🇬🇧 PETRINCIC BROS RC SLOVENIA 🇸🇮🕊️✌️👍
Wow I just realized you have 43k subscribers now feels like only yesterday you where at 20k man you guys are growing like crazy. This plane looks so sexy sorry you had so many issues.
Thanks for support my friend. But it goes slow I think. THere are some channels that I started to watch when they had arround 50k subs and then one day over 100k or 500k and all that in very short time. I really wonder how can that be. We are posting for 5 years now and didnt get to 50k subs. But still, I do believe we ahave one of the best subscribers 👍
@@PetrincicBrosRC I feel your pain Robert haha 3 years this month for me and I’m only at 7k. Our subject isn’t as popular as other channels but hay we have more fun with our toys 😉
I feel your pain, I had the same problem with a "GOOD FLYER" even after two modifications and putting in a gyro, the plane was uncontrollable. Must give you a thumbs up for getting yours to fly. Salute from Pittsburgh.Pa.
👍👍💪 finally !! Haha, congratulations!! Big salute to you both to make it fly's successful. Thanks for the recommendations and mod.. will surely buy the KIT and put in with metal gear servos.. (seems like pnp servo with plastic gear just not strong enough)
Knew you would get it flying my fellow brothers. Never quit and never give up. Try and try again, no such thing as fail. Always remember the final words. What could go wrong ha ha!!!!. Well done brothers.
Theres only one rc channel where you can get this kind of review, advice, and entertainment. Zee Petrincic Bros channel. Congrats on putting this lame duck in the air and beating the odds. Salute to persistence. Russ NC/USA
The Savage Bobber certainly earns its name! It's seems mostly "savage" to the grass AND your mind trying to get it in the air! Glad to see you finally taming this "Savage" and turning it into the "Obstinate Bobber!" NIIIIIIIIIIIICE! 😁👍
need to see if other Bang good planes use those servos...not so cheap if you must replace them every flight. Thank you for sticking with it , and finding all the faults an telling how to correct them.
Its interesting that the more problems I have with the plane the more I want it to get in the air and fly it as good as is it possible. Thanks for kind words Thomas.
Back it the days when all RC planes had to be scratch built or kits I would use a Robart incidence meter. I would use it to check the wing, horizontal stab and motor angle. Congratulations on the flight!
I just love good challenge my friend. Really. And i will work on this plane more and test it. Cant wait but not right now. Have so many to film before that. Winter project.
You finally got it to fly, congratulations! Like the looks of the plane (although the fuselage is very short), but I think, that the edges of the main wing are very thick and the tail is too massive. 600 g is already light, but there seems to be still a lot of room for improvement. Glad you both did'nt give up and gave us the whole (well filmed) picture. Greetings from Germany.
You said it great my friend. There is still room to make this plane better. And I will in the winter. Will take time and check it all from spiner to the rudder what is going on here.
Got to love persistence! Seems like a tricky little beggar. I would like one but I do think it's overpriced also my hanger is full. I salute you guys, one of best RC channels on the Tube!
For sure, never give up never surrender paid off. But I believe it is true that with enough power and the right cg you can get a brick to fly. lol Good job guys.
I am happy to see you get it in the wind finally!...but any plane that can not carry snoopy and the bunny isnt worth it!! But im sure you can send this plane to "area-52" and they can put some edf on it and make it into a stealth plane for snoopy and bunny! SALUTE!
I'm very glad you finally got to fly it. I'm trying to think of why this aeroplane would be so difficult. Do you think it might have something to do with the lack of keel surface? Keel surface (the side of the fusleage) really helps to contribute to stability in yaw. The lack of keel surface will decrease the overall weight, but seems to really make the aeroplane too difficult to fly. Well done Pilot Robert for getting this unmanageable thing in the air - You've earned the title of test pilot without a doubt!
Yes 🙌 Hi this is Deano this is my other account It’s awesome to see that sexy bird fly. I bought one too still in the box. So my question is so it will not fly with a 3s battery. And I wondered how did you set the motor angle with How many washers. And did you run the factory CG? Some day I really hope to meet you guys. I love watching your show keep it up you guys make me laugh and enjoy the hobby. Your buddy Deano
I had the same problem when I was learning to fly. the problem is called a ground loop . it happens when the wing fly's before the tail is flying . It is a problem with high wing tail draggers. we beat the problem by adding power and jerk the plan in the air.
Another honest evaluation. I wouldn’t buy it for a dollar, either. They are too important to cheap out. I like Captain Blaze’s assessment, “they should have a -0 rating.” That says it perfectly.
Glad you gents stuck with it. The plane is not for beginners for sure. Too many "bugs" to sort out. Id guess its an Advanced model for the experienced modeler who has the time. Its a really good looking bird. It might have needed a 1inch longer wing for its weight. The landing gear might need to be beefed up, and the servos might need to be replaced? Dunno? Great flight.🙂
@@PetrincicBrosRC I will love to watch the awesome video! You know I will be there. I think the savage bobber is a great kit, I think the designers should have ironed out the bugs before letting it go to market. The landing gear should be a 1 piece leaf spring like the ugly stick. and the engine angle should have been pre set. Me personally, I would have extended the wing length a 1/2 inch on both sides and made the wing chord a touch wider for more lifting surface, just a touch. Its a heavy bird which needs speed to keep it going, but the concept of this bird seems to focus on the beginner-intermediate pilot...Love watching you guys have a blast!!!!
It is like in the manual just a few milimeters more to the back but you cant get it with recommended batterie. If there will be the second filming I will tell exactely where it is.
OMG- Robert Your Very Patient, and its paid off but the servo's are Nothing , Get some good servos and it will be much better because at the moment its sounding like a juicer machine/coffee grinder he he he awesome flight and almost put it in the car was so funny great save and well done to you all Guys Salute to you Both :-)
Enormous Respect for the Brothers! In most videos they come across as just two fun, happy-go-lucky guys, but with this video I have discovered they are in fact very determined, earnest engineers who will NOT quit until even the sketchiest and poorly equipped model finally files right. Big, Big salute to Pilot Robert & Captain Blaz!!! Kudos and respect!
You said it so beautiful my friend. I will always consider myself as amateur pilot and RC plane lover but I do like to think about the planes a lot and about their enginnering. And the more problems the plane gives me the more Iam determined that I will fly it no matter what 😊 Even if I crash it totally trying. As long as I have something to fix and glue together. I almoust thought that the story with this plane was over after third attempt when the whole nose of plane was gone in pieces and the wings broke from the plane. And then when I was searching for pieces in the grass I said to myself that I will fix it and try so long that it will fly so help me God. Big salute from Slovenia and thanks for support.
After your first try I started trying to find other videos of this plane. Rob, everyone has had trouble flying this plane and you're the only one I've seen to get it to fly nicely. Kudos!
Hello, look at Olaf Borchert on TH-cam
Crazy ride Lauren but at the end Iam happy the bird was in the air. Its interesting, that the more problems I have with the plane the more I want it to fly good.
@@PetrincicBrosRC Ohh Yeahhhhh..Salute.. Yesterday I also modified my motor angle (down / right) to 5 degrees using washers as a solution. that seems to be the solution when I see your video.
The servos are really weak. a servo broke while programming. 9gr. Servos with higher quality and you are on the safe side. Extraordinary to get the bobber safely back on the ground with such a rash. Respect.
@@olafshangar6223 With washers and good servos one could have fun with this plane. Its even more interesting to me becouse of all the problems. Somethimes I love chalanges like this bird. Will come and check your video my friend. I have heared about it. Big salute from Slovenia.
@@PetrincicBrosRC Salute from Germany.
When the weather gets a little better again (60kmh wind), I'll test the changes and see what's in the little bobber.
In my first video it was 12-13kmh wind. perfect for leaving you almost in the air with little use of the engine. use the flaps .. also at the start, this increases the lift.
Thanks for your persistence. Nice to see the plane fly.
Bravo. It's 1:35 here in New Hampshire USA. Happy to see a success!
Good morning my friend. Its 6:37 AM here.
Good job staying with it. congratulations on you successful flight.
Thanks Jim. I really had to do this flight to sleep good again 😉
After watching many TH-cam videos on the little bird. Your advice has paid off. My bobber flew first time no issues. Two small washers pushing the motor to the right works. Thank you for your sound advice.
Really glad to see this little plane fly I thought it was a really good-looking your persistance in getting it flying finally worked oh yeah and I got to give you credit Captain Robert you don't give up very easily
Iam also really happy that we can see another bird in the air. I wonder if there will be flight review video 😉
@@PetrincicBrosRC
U may wanna swap out the plastic gear servos for metal gear servos.
Thank you for your honesty, “I wouldn’t buy this plane for $1”. 👍
Salute from Sydney, Australia.
Ha , I thought you were going to land in the car too !
Congratulations on getting this plane to fly .
Salute from Canada .
I almoust did 😁
I salute you, for not giving up!
Big salute back.
Maximum respect to Petrincic Aviation for finally getting this patchy plane in the air! There are many better birds than this, but there's only one RC channel for total fun. Big salute as ever from London.
You said it great my friend. Thanks and big salute back from Slovenia.
Congratulation, that you learn it flying !!
I really did my friend 😁
Great respect to you. As always, a super video. Keep up the good work, absolutely great. Beautiful greeting from germany
Wow what a little devil! Well done for getting this baby airborne 👍
Big Salute for getting the Bobber in the air! The three videos of this plane and the four (I think) of the Bushloader are some of your most interesting because they showed the process you went through to get them to fly. This is good instruction for new players and old heads alike. Thanks to you and Capt'n Blaz for making these videos! (NC/USA)
Its interesting that the more problems I have with the plane the more I want it to fly good and the more efford I will put in that.
Finally she up in the air what a challenge she was but hey it’s flying good one an Blaz great videoing as usual
congrats ! you are rewarded on your perseverance !
Thanks my friend. I feel good.
This just reinforces the old sayings,, if at first you don't succeed try, try again and the third time's a charm. Third video is what I mean. My favorite brothers never give up. Hat's off to you both! Big salute from Chicago! Oh yeaaah!
Yes Yes Yes. We Have SOMETHING!! The 10th time is the charm. Congratulations gentlemen. Excellent. Love your vids.
Finally my friend 😁
You guys are a real blessing on the RC community!! You should maybe concider sell off some of the planes you have to fund more new planes!!
Thanks for kind words my friend. Maybe I will really have to start to sell them since I dont have my company anymore, but I really dont want to. They are like my friends and family. And also here in Slovenia you get nothing for second hand plane.
Congrats on finally getting her in the air nice job fellas!!!!
Well done Guy's you won the battle. Big Thumb's up.
Thanks my friend. I think we will test this bird even more in the future when I will have time. Have a few more ideas to make it fly even better. I hope 😉
@@PetrincicBrosRC I will be looking forward to it. Big Salute
Congratulations Pilot Robert and Captain Blaz on your hard work and victory in finally flying this plane successfully. Your tenacity in continuing to work with this plane is fantastic!
You finally got that bird in the air! Salute!
Looked good in the Air!
Not bad my friend. But really strange to control.
I like how you never gave up on this plane. Now time to put it in the hanger as a trophy on your victory and move on to other planes.
Maybe I will modify it even more and try to fly it even better. Great challenge for me. I love it.
You got it 🐱 my friend
Finally my friend.
Good job boys👍👍patience always pays off👍👍
Thanks my friend. I had to do this no matter what.
Good morning, I get only Dutch subtitles cause everyone is sleeping yet. But I like your special English;-)
Hey my friend. I dont know what is with that Dutch subtitels 😁
Well done guys for persistence alone. Nice flyer once you moved the motor. Job well done.
I will tgry to fix it even more during the winter.
The only time I have seen one fly properly so massive salute to you Robert!
Thanks my friend and big salute back.
Yo bro you got it to go lol well done Robert big salute it looked great in the air though
Never give up 👍👌👍 Nice job ! You stuck it right that time 😂
I almost stuck it in my car 😁
Brilliant that she finally got in the air, almost landed back in the car 👍🏻
I really feel good now my friend.
Fantastic! I love that feeling when your struggles pay off!!! 👍👏
Its the best my friend.
Thanks for saving us some money on this one!
Really hard to recommend it.
All hail the Petrincic Bros. They NEVER give up. That was a spectacular Re-Re-Re-Maiden Pilot Robert!!!!!!!! Big salute to both of you.
Well done Robert! You persevered with this difficult plane & it paid off. An enjoyable presentation.
Some aeroplanes are a bit shy, and need a little love and encouragement to bring out the best in them.
Salute!
FINALLY THE OFFICIAL MAIDEN! CONGRATULATIONS Capt. Robert! It was a big effort, but you got it right! Still it needs some improvements, but it FLIES! Thank you boys for your video, GREAT! Regards, George
Dis is it my friends. Big salutes Captain Robert and Captain Blaz, munted swervoes will do it every time. Landing, 10/10, dat was it, almost in the car. Salutes again, dat was something hey?
Landed almoust like with SR71 😁
I am truly happy for you. You did it. I could hear the frustration in your voice on the other videos
Great zooming CPT Blaz, great job of filming the Savage Bobber. Way to fly Pilot Robert. This is a hobby, this is my hobby, I do this hobby for fun. That little saying really works when you want to stomp or throw a plane that your having problems with or getting something to work. Fun one, Salute, Jeff in LA USA
To tell you the truth I really love to have a plane like this from time to time. Good challenge for brains to figure out what is wrong here.
Well done for sticking at it!! 💪🏻 seems like they have made a bit of a lemon with this one, but you made it fly in the end!! Big salute from 🇬🇧
Almost landing in the car, nice! 😂
To tell you the truth I wasnt planing this 😁
I'm glad it's finally flying, I knew the thrust angle was a little off
Cool good work rc friends. Big Salute 👍👌
Thanks my friend. Finally.
@@PetrincicBrosRC Yeeee great work. 👍
salute! I am glad to see the plane fly. Those servos really stink. LOTS OF PAIN
Nice to see you want fix all the problems and fly again.
Servos are nothing here. You have seen that two broke on single flight.
Never give up that's what you teach me THANKS
Thanks for stopping by my friend.
無事の飛行におめでとうございます！エルロンで左右を調整したみたいですが、翼のねじれでバランスが悪かったのですね！他の方の飛行機も同じ現象でした。
ありがとう。 飛行機がついに空中に出てよかったです。 スロベニアからのご挨拶。
Brilliant! You got it flying very nicely after all.
Finally my friend 😄
Fantastic !!! 4th time lucky fella's I knew in my heart that you would get there and you were lucky to get it down in one piece on those servo's !!! 🙈 keep up the good work 👌
Robert, respect that you never give up. Such videos are interesting as well as a bit thrilling. Like as for example also with SR71 Impeller, you finally succeeded. Big salute!
Planes like this really atracts me becouse I want to figure out what is wrong and solve the problem if I can. Its like Iam helping the plane to fly becouse it really wants so bad. That is why I dont sell any. I look at them as my friends, my family. Really.
@@PetrincicBrosRC 👍
GOOD MORNING MY FRIENDS. IM SO HAPPY FOR YOU ROBERT. I KNEW THAT YOU WOULD GET THIS PLANE TO FLY. CONGRATULATIONS ON YOUR DETERMINATION TO GET THIS BABY TO FLY. THANKS FOR FILMING BLAZ'.🇬🇧 PETRINCIC BROS RC SLOVENIA 🇸🇮🕊️✌️👍
Oh I feel good my friend.
@@PetrincicBrosRC SO YOU SHOULD ROBERT 🇸🇮👍
Re-naming you pilot "never give up" well done sir
Thanks Mike.
A good lesson in not giving up...
Always my friend.
Wow I just realized you have 43k subscribers now feels like only yesterday you where at 20k man you guys are growing like crazy. This plane looks so sexy sorry you had so many issues.
Thanks for support my friend. But it goes slow I think. THere are some channels that I started to watch when they had arround 50k subs and then one day over 100k or 500k and all that in very short time. I really wonder how can that be. We are posting for 5 years now and didnt get to 50k subs. But still, I do believe we ahave one of the best subscribers 👍
@@PetrincicBrosRC I feel your pain Robert haha 3 years this month for me and I’m only at 7k. Our subject isn’t as popular as other channels but hay we have more fun with our toys 😉
I feel your pain, I had the same problem with a "GOOD FLYER" even after two modifications and putting in a gyro, the plane was uncontrollable. Must give you a thumbs up for getting yours to fly. Salute from Pittsburgh.Pa.
Tenacity pays off. Not sure the frustration was worth it. But hey it looked good in the air. Nice job guys. NEEEXXXXTTTTTT
👍👍💪 finally !!
Haha, congratulations!!
Big salute to you both to make it fly's successful.
Thanks for the recommendations and mod.. will surely buy the KIT and put in with metal gear servos.. (seems like pnp servo with plastic gear just not strong enough)
Knew you would get it flying my fellow brothers. Never quit and never give up. Try and try again, no such thing as fail. Always remember the final words. What could go wrong ha ha!!!!. Well done brothers.
That was so fun to watch. I think -10 = p.o.s. Such a cool looking plane just needs some really good gear. Peace out.
Theres only one rc channel where you can get this kind of review, advice, and entertainment. Zee Petrincic Bros channel. Congrats on putting this lame duck in the air and beating the odds. Salute to persistence. Russ NC/USA
Savage Bobber...the first FNF (fix and fly) RC plane! Thanks Guys!
You said it great my friend. FNF 😁
Obviously bad R&D and QA from the manufacturer of this plane. My hat off to the Slovenian brothers that always gives us viewers a superb show.
Finally it flies. I've seen a few others having a good time with it, but also too many people having the torque issue.
Well done.
Thanks my friend.
The Savage Bobber certainly earns its name! It's seems mostly "savage" to the grass AND your mind trying to get it in the air! Glad to see you finally taming this "Savage" and turning it into the "Obstinate Bobber!" NIIIIIIIIIIIICE! 😁👍
To tell you the truth I do feel good now 😊
need to see if other Bang good planes use those servos...not so cheap if you must replace them every flight. Thank you for sticking with it , and finding all the faults an telling how to correct them.
They are really not good my friend.
Děsné divadlo pro mne. Dost, to stačí.
I'm so impressed by your determination, nice job! You should be the official test pilot for all of these companies :)
Its interesting that the more problems I have with the plane the more I want it to get in the air and fly it as good as is it possible. Thanks for kind words Thomas.
Back it the days when all RC planes had to be scratch built or kits I would use a Robart incidence meter. I would use it to check the wing, horizontal stab and motor angle. Congratulations on the flight!
Maybe you have something there my friend. I really wonder what kind of incidence angle it is. The motor angle is not correct for sure.
This Plane is a single cramp. I want to land and redeem it with my Benelli 828. Salute 😎
Big salute back my friend.
Finally, great review
Thanks my friend.
Finally she flies !!!
Oh yeah my friend.
Good job getting this bad news baby to fly. This plane looks like it is more trouble than it is worth.
I really cant reccomend it my friend.
Great flyin Robert I think a 5 th attempt after everything is fixed would be nice. A challenging plane :)
I just love good challenge my friend. Really. And i will work on this plane more and test it. Cant wait but not right now. Have so many to film before that. Winter project.
IT FLYS!!!
This video is hilarious and this channel should be called. Panic brothers RC and I can’t wait for delivery of this plane that I ordered today! 😂
Always for good fun here 😁 Good luck with your bird.
Glad to see this one flying Looks really good in the air The ground performance still has a lot to desire but hey She flys now 😁
Great job guys 👍✌️
At least we have seen this plane in the air 😁
AWESOME...!!! If at 1st you don't succeed TRY,TRY. AGAIN...!!!👍👍😉😉😎😎
Nice! So much effort to get this one flying. This should be something eh ? 😎
Never give up my friend.
@@dronepilot260rc I just had to try again my friend.
You finally got it to fly, congratulations! Like the looks of the plane (although the fuselage is very short), but I think, that the edges of the main wing are very thick and the tail is too massive. 600 g is already light, but there seems to be still a lot of room for improvement. Glad you both did'nt give up and gave us the whole (well filmed) picture. Greetings from Germany.
You said it great my friend. There is still room to make this plane better. And I will in the winter. Will take time and check it all from spiner to the rudder what is going on here.
Great video! Seems like the plane is not really tested from the fabric. Very nice job from you two Pilots 🙃
Look at Dis. OH YEAHHHHHHH 😘. So happy for you it's flying. Do love me some Brothers because you don't give up 🤣. ✈️🧔💝💝💝
Got to love persistence! Seems like a tricky little beggar. I would like one but I do think it's overpriced also my hanger is full. I salute you guys, one of best RC channels on the Tube!
finally you made it :P
And i feel good now 😊
@@PetrincicBrosRC i can bet that, must be frustrating when it won’t work even tho it’s built the right way :)
@@pyroboyswe The more problems I have with the plane the more I want it to fly.
@@PetrincicBrosRC hehe I understand, keep up with the great videos, I’ll keep on watching from Sweden, salute 👨✈️
For sure, never give up never surrender paid off. But I believe it is true that with enough power and the right cg you can get a brick to fly. lol Good job guys.
Oh I love to assemble crazy planes. Like you said with good CG and thrust you can fly anything 😊
Just shows that a good Pilot can even fly a Banana with wings...Well Done.....gotta work on the landing...SALUTE!
I think I will get me one just to see if you had faulty one.. this little plane looks so nice 👌
Try my friend. Would be interesting to know. Keep me posted.
It is clear now also for me, the naked fuselage has effect on rudder and vertical stabilizer, the same behavior in turns as like as my printed Savage.
I am happy to see you get it in the wind finally!...but any plane that can not carry snoopy and the bunny isnt worth it!! But im sure you can send this plane to "area-52" and they can put some edf on it and make it into a stealth plane for snoopy and bunny! SALUTE!
I'm very glad you finally got to fly it. I'm trying to think of why this aeroplane would be so difficult. Do you think it might have something to do with the lack of keel surface? Keel surface (the side of the fusleage) really helps to contribute to stability in yaw. The lack of keel surface will decrease the overall weight, but seems to really make the aeroplane too difficult to fly. Well done Pilot Robert for getting this unmanageable thing in the air - You've earned the title of test pilot without a doubt!
Maybe see throu plastic foil would help. I think that even the real one is not so easy to fly.
Yes 🙌 Hi this is Deano this is my other account It’s awesome to see that sexy bird fly. I bought one too still in the box. So my question is so it will not fly with a 3s battery. And I wondered how did you set the motor angle with How many washers. And did you run the factory CG? Some day I really hope to meet you guys. I love watching your show keep it up you guys make me laugh and enjoy the hobby. Your buddy Deano
I had the same problem when I was learning to fly. the problem is called a ground loop . it happens when the wing fly's before the tail is flying . It is a problem with high wing tail draggers. we beat the problem by adding power and jerk the plan in the air.
a-haaa A late one you tricksters!Finally you got it to fly good.
Well, its 6:30 AM here my friend 😊
@@PetrincicBrosRC you have a great morning,i hope bacon is involvrd somewhere🖖👍
16:44 The pilot is a woodpecker!😂🤦👏👏👏
It really sounds like that 😁
Another honest evaluation. I wouldn’t buy it for a dollar, either. They are too important to cheap out. I like Captain Blaze’s assessment, “they should have a -0 rating.” That says it perfectly.
Glad you gents stuck with it. The plane is not for beginners for sure. Too many "bugs" to sort out. Id guess its an Advanced model for the experienced modeler who has the time. Its a really good looking bird. It might have needed a 1inch longer wing for its weight. The landing gear might need to be beefed up, and the servos might need to be replaced? Dunno? Great flight.🙂
They are making over 2m one now for glow engine. I hope to test one in the future.
@@PetrincicBrosRC I will love to watch the awesome video! You know I will be there. I think the savage bobber is a great kit, I think the designers should have ironed out the bugs before letting it go to market. The landing gear should be a 1 piece leaf spring like the ugly stick. and the engine angle should have been pre set. Me personally, I would have extended the wing length a 1/2 inch on both sides and made the wing chord a touch wider for more lifting surface, just a touch. Its a heavy bird which needs speed to keep it going, but the concept of this bird seems to focus on the beginner-intermediate pilot...Love watching you guys have a blast!!!!
Well done chaps, so where was the cg in the end?
It is like in the manual just a few milimeters more to the back but you cant get it with recommended batterie. If there will be the second filming I will tell exactely where it is.
OMG- Robert Your Very Patient, and its paid off but the servo's are Nothing , Get some good servos and it will be much better because at the moment its sounding like a juicer machine/coffee grinder he he he awesome flight and almost put it in the car was so funny great save and well done to you all Guys Salute to you Both :-)
Iam really glad that I was flying it at the end my friend.