My first 14ft plywood stand up paddle board. Song is called Keep Moving, by Mr. Scruff!! I hope youtube doesn't decide to take the song off my video :s Please checkout my FB page for SUPs / 276249522442432
I don't think it is the Kaholo. I'm looking at the plans for it, and the shape of the bulkheads is completely different, unless he cut out a lot of material from the bulkheads to save weight.
You guys did a killa job, nice one!!! Beautiful finish and she looks fast. She didn't look to stable over mild chop would that be due to its width? British water feels like riding a hard wheel skate board over gravel! 😂 so I am looking for any design features to help smoothen the ride but yet I want that sick, sleek arrow look! Hit me up with any advice if you can please? 😎
Hey fellaz.... Thanx much for the kind words!! sorry i don't reply much on here. Yes the board is a modified clc kaholo. I also build the paddles spearguns boats... u name it :D if anyones interested in custom boards or paddles lemme know. You can check out and hopefully 'LIKE' my FB page... Lin is up on the video description! Thanx again!! Stay safe be happy :D
I really liked this project, congratulations! Can you send me a plan for this board so I can try to make one? I'm from Brazil and here it is difficult to find plans for this board.
Nicest chesapeake Sup ive seen without a doubt. Have you seen the jen paddleboard plan? About the same as the clc plan but wider all-around especially in the tail. Would be great for the bigger paddler, fishing touring ect. What would you charge to build one? If so how do i contact you?
Awesome job! I'm planning on making one but with different materials. I hope mine will look as good as yours. Did you consider foam filing to avoid any fast leaks?
I'm interested to have more info about the top layer, how thick it is? The heat press is used only for make the pattern with the different wood type? I don't plan to make a pattern like yours (even if is a pleasure to eyes I don't have access to that kind of heat press machine) anyway I want to build the top with a veener and my principal concern is understand what's the right thickness for have a lightweight layer but avoid unwanted flex when glassing
I cant wait till Tesla powerwalls are cheap enough to buy one just to put into something like this. make it into a electric jet powered craft that can run for hours.
Hi man, this sup is so dope!! I've one question to do: what did you use to get side handles on sup? Did u get onto just with screws? Cuz i need to put one of them on the center but my fear is that, screwing it, the water can penetrate into the board...how can i do that? Thanks!
Mr. Scruff from NinjaTune records... hell yea, so good to see people listening to good unknown artists ( in the US)
Beautiful job!! Nothing like the beauty of wood and hand crafted, one of a kind items!! I like the music as well!!! Thanks!!
Such a beautiful build! I love the hand made aspect of it all.
This is the best DIY I've seen in quite a while,Thanks for sharing
This is a masterpiece, very impressive. I'm hooked, this is my next project. Thanks for posting the video.
Beautiful board
That is a beautiful piece of craftsmanship!
That's a beautiful board, I like the hollow construction
Excellent workmanship
Very nice workmanship!
That is a thing of beauty.
beautiful board! nice work!
gorgeous work. entertaining vid.
nice job looks great and performs very well
That board is siiick man, great job. Exellent edit too
Looks like a lot of work went into making that! Totally worth it though! :-)
Very cool. My "someday" dream is to build an OC-1 this way.
wow!!! really nice board!! Congratulations!!
very very cool ! great video ! Thanks * * * an all the time good water under your board : )
wow.. looks great!!
Dang dude. Banging bod
that thing is beautiful......I LOL'ed when u fell in
Very cool.
Awesome work....
Nice build
That's a CLC Kaholo kit. Nice job!
Great job on the Sup, bro!
Top.:):) wowww nice work and video :):)
She's a Beauty!!!
Goodigood man, congrats!!
Hey fellaz thanx much for the kind words… I unfortunately do not have any blueprints etc etc. You can get some from the link posted below.
Hayaari Marine i couldnt find the link
VERY NICE! MAN!
Wow super cool!
que Maravilla,¡¡ enhorabuena¡¡
I don't think it is the Kaholo. I'm looking at the plans for it, and the shape of the bulkheads is completely different, unless he cut out a lot of material from the bulkheads to save weight.
Hello, I'm from Brazil!
I love your sup!!!
Where I can get this project to build my own sup here?
Congrats
Luiz
Thank you!! Took about couple weeks :) Now i can pop more than 5 a week ;)
That was really awesome.Loved the vid. :)
i really like your boards :) going to build my own but ill go standart foam/epox.
good job man
Nice job. :)
once i move up to skills with my inflatable, this is something that would be nice. A crafted Kaholo
Have you seen my DIY sup project mate? th-cam.com/play/PLAQXLUUtHVUDPyM1_H3GzbqHmXkaMTafn.html
Excellent!!
ok this is ultra cool and I want one!!!! if it isn't too heavy!!!
beautiful board! May I ask about how much does it cost to make your own? I would love to build some for my friends to use when I go out on mine
nice build
You guys did a killa job, nice one!!! Beautiful finish and she looks fast. She didn't look to stable over mild chop would that be due to its width?
British water feels like riding a hard wheel skate board over gravel! 😂 so I am looking for any design features to help smoothen the ride but yet I want that sick, sleek arrow look! Hit me up with any advice if you can please? 😎
Hey fellaz.... Thanx much for the kind words!!
sorry i don't reply much on here. Yes the board is a modified clc kaholo. I also build the paddles spearguns boats... u name it :D
if anyones interested in custom boards or paddles lemme know.
You can check out and hopefully 'LIKE' my FB page... Lin is up on the video description!
Thanx again!!
Stay safe be happy :D
good job bro
Ok.. That was awesome job.. but I'm still curious, what is SUP for?
Very cool! :)
Great lookin board! I noticed you don't have vent plug or do you!
nice transition at 2:27 :D
You my friend are going to be stinking rich!
I really liked this project, congratulations! Can you send me a plan for this board so I can try to make one? I'm from Brazil and here it is difficult to find plans for this board.
Nicest chesapeake Sup ive seen without a doubt. Have you seen the jen paddleboard plan? About the same as the clc plan but wider all-around especially in the tail. Would be great for the bigger paddler, fishing touring ect. What would you charge to build one? If so how do i contact you?
@KEVANAVISION I made the top sheet... its hand layed veneer then heat pressed.
Wassim, cool board! Nice to hear news from you!
BTW Have you ever thought to build a wooden sit-on-top kayak?
nice work...
I guess you need to fix a leash which is used for surf borders..
muy bueno, quería saber qué se le aplica en la madera para pegarla ?
massive breda!
Great looking board...what's the length, width and especially weight? I suspect it's lighter than full frame boards.
Awesome dude ;:)
Nice! The topsheet is fantastic. That's a Chesapeake Light Craft Kaholo 14'., right?
Sweet board, bro! Great job! Are you planning on posting your plans somewhere, or even selling them?
OK, really quick video cuts, but you totally skipped how you made the top laminate. That really sets the board apart. How did you do it?
AWESOME
2:50 Сдуло волной контейнер ))
come to jamaica .. im planning on building paddle boards. we have cottages in negril and little bay
Awesome job! I'm planning on making one but with different materials. I hope mine will look as good as yours. Did you consider foam filing to avoid any fast leaks?
Hola, me podes pasar los moldes o medidas del Stan up asi tengo una idea para hacerme uno igual, gracias muy bueno el video.
Great jop man!! nice wood-joice! what kind of wood did you used for the "boat" and the top-sheet??grz and enjoy your rides on it...
Good evening my friend! Can with any way have this plan????? it was f@cking awsome !!!!!!!!!!!!!
Thanx brother! :)
I'm interested to have more info about the top layer, how thick it is? The heat press is used only for make the pattern with the different wood type?
I don't plan to make a pattern like yours (even if is a pleasure to eyes I don't have access to that kind of heat press machine) anyway I want to build the top with a veener and my principal concern is understand what's the right thickness for have a lightweight layer but avoid unwanted flex when glassing
Love your video. What did you put on coating to make your SUP looking shining?
Great vid! What's the name of the song? Very nice choice of soundtrack!
wow!
What kit did you use? What type of wood is the hull? Really nice!
VERY NICE BRO!! i like it, built anymore??
Excellent! btw, where is this filmed?
Great job man! where do you purchase the plan?
cool
Delicious
Nice
I cant wait till Tesla powerwalls are cheap enough to buy one just to put into something like this. make it into a electric jet powered craft that can run for hours.
@jamie4841 Thanx dude... Ya i built a few more.
Beautiful!! How long did that take to build?
This is the JEM kit, correct? Does it handle waves ok?
Can I have your SUP'S plan? I want to build that😍
Hola, podría compartir los planos para hacerlo? Gracias
Did you make the paddles as well? How did the paddle that had the ergonomic bends perform for you, where can I find one of these to try
I sure do! :)
Hola, podrías compartir los planos ? Gracias !!
Any chance on getting the plans?
what kind of wood did you use? what is the wood used for the side called that lets your curve your board like that? sorry im new to this
nice did you model the surface in a cad? solidworks?
I need this plan
Please
Good job
Thanks 👍🏻
I'm building a SUP out of 3mm ply, you might find it interesting mate! th-cam.com/video/hPWi1gfqZKI/w-d-xo.html
Hi man, this sup is so dope!! I've one question to do: what did you use to get side handles on sup? Did u get onto just with screws? Cuz i need to put one of them on the center but my fear is that, screwing it, the water can penetrate into the board...how can i do that? Thanks!
Very nice work
Where i can find the plans of this model thank you
what kit is that or where did you get the top sheet....that is something i have been looking for.