ฝัง
- เผยแพร่เมื่อ 8 ก.ค. 2021
- In this guide we'll be cooking a custom firmware for a Xiaomi m365 Mi Pro 2 (great naming guys - great ! just ! great.)
This also applies to other ninebot and xiaomi scooters, check
scooterhacking.org for more details.
In this guide we'll be doing the following:
1. unlock the top speed of the scooter
2. increase the current ratings of the various modes
3. eliminate the 5kmh before torque requirement
4. opt for a smoother acceleration map and operating mode
5. smoother e-brake effect - วิทยาศาสตร์และเทคโนโลยี
For those of you with new scooters (april 2022) that can't overwrite your DRV version, check this out: th-cam.com/video/EKa-uoOpaC0/w-d-xo.html
I have the same issue, I am planning to return it.
Mine just arrived, declined firmware update through the home app, custom firmware installed no problems
Thats not good, i just upgrade... f*ck
I have the same shit problems, nothing works !! Fuck
Are tou guys trying to downgrade the BLE before applying anything else ?
Very good tutorial. Thank you for explaining everything so well.
Hi darieee! Thanks for your video, my scooter got stolen and i had to do this again. Last time was over a year ago so didn't remember shit. With your video it took me barely 10 min and max speed is ok. Havent tried your config yet but I feel it will be better than the old one! Thanks again!
my pleasure 🤘
Great tutorial. I've been using it for a week without issues. I have a xiaomi nordic pro 2 and it was limited to 20 kmh. Now it can do 32 without any issues. Nice and easy tutorial and well explained too. 👍
Hey champ i have pro 2 nordic aswell but limited to 20 kmh. Did you use the same settings as he did in the video? Im just under 100 kilos so im worried that i should put lower numbers but would prob use those numbers. I just had a Ninebot ES4 before with 33 kmh top speed so even 25 feels a bit slow now.
@@mathiasweinreich1100 I used the same settings as he did for the battery and top speed. I'm 72 kilos and it's perfect for me. It gets up to 30 km/h without any issues and it can get up hills easily.
Hi. I also have Nordic.
Do you think it doesn't matter what firmware is on it from the factory, the update will still work??
as long as you haven't updated it to the newest firmwares, it should be fine
Hey man. It's sad that it's illegal in Denmark to go over 20kmh. May I ask why you tune it to go faster than whats legal? I don't know where you're from, but since you have the nordic version, my best guess is that you're from Scandinavia.
Thanks man👍🏻 I cooced upp it and it worked just fine. Let there be comments here from you/people around world infos about if over heatings/burnings comes upp. Great job jäbä😁🙏🏻
Great easy to follow video. I just flashed my xiaomi pro 2 this morning using this video and worked perfectly. It now wheelspins when I pull off lol
🔥🔥 ride on, brother
Heyy does it work on ble 1.5.7
How fast does it go?
Just done this and worked a treat thank you 🙌🏼
Followed your instructions and the flash itself works great, however the scooter wont turn off, it turns itself back on immediately after holding the power button down for 3 sec. Any suggestions?
I have tried the following:
- Flashed the stock (vanilla) firmware
- Hard reset (brake, power button and throttle)
- Disconnected the battery cable
- Tried to change region
The scooter wont connect to the Mi Home app anymore, I sometimes get the error code 29 but that disappears just by pressing the power button. The scooter is brand new, did activate it from the MI Home app but did not update the firmware so the BLE was not 157 when I flashed it.
Thanks for the video! Everything works fine
Is it possible to get the numbers to get a "cook file" so the maximum speed in sports Mode is 27 Km/h and standard Mode 23Km/h? i have BLE 1.3.3, DRV 2.2.9 and BMS 1.2.8
all I need right now from my scooter is a speed boost, in this case do I have to adjust the amperage or can I just stick with the stock settings just to be more safe and increase it to let's say 45km/h ? Also other than a faster depleting battery will it have any other negative effect such as heating up quicker?
depends on your weight - but - increasing a pro2 to 27A .. maybe even 28A, should be ok
the newer controllers are built way better, same with the batteries
unlock the speed to 45, or - better still - use DPC, which doesn't have any speed limit capability
and see how that goes, if you need more speed - increase the current too
Is it ok to flash a new CFW on top of a previous CFW? I want to try different settings and want to know if I can mess it up. Thanks!
Good afternoon, I would like to unlock the sport mode for speeds above 34km/h which cfw is recommended for those who do not have excessive battery consumption or burn the controller. thanks
I just want to restaure the cruise control on my pro 2 from october 2021, but it seems impossible ... What do I do ? Thanks
Your video is sooo good. Thank you sooo much. You made my life sooo much better. :)
I see this video is from 2021. Is this still your recommended settings if i have a Mi Pro 2? Thanks a lot!
Hi,i did also on my pro2 but the problem after i installed all,my scooter wont turn off anymore. When i turning off it’s automatic on by its own.
Hey @darieee i just saw that the battery symbol just blinks right after the update.
Does this always happen?
Hello, pour AovoES80 comment modifier la limitation de vissée ? l'application a une limite inférieur a 31km/s. ou trouvée une version précédente et stable du firmware. la version stable permettant cette modification est bien "B-01.0.11k" ? la trottinette dispose d'une interface directe sans passée par l'application ? Le contrôleur a la capacité de configurer des paramètres en dehors de l'application ? merci
Can you help me? I want to make the medium recovery mode, change speed in S mode to 30 km/h. What I need to select? I want to keep 300W in engine and other option.
It works! Legit stuff!! thanks
I Weight about 60kg and its spring is 10c and summer are 30c warm. How many amps can I put to my stock xiaomi pro 2?
I try to flash my bike to do 20 km / h in sports mode with 30 amp ... but it still does 32 km / h.
i see that the top limit is breaked.but can a set down speed limit ??
Thank you so much, this made my scooter so much better
no battery problem?
@@AdiRpg3 no, the battery can handle it just fine, only problem is that the motor overheats a lot faster
@@that_guy6116Does it only go quickly on sport mode
Have a badly done pro 2 that have all limits removed. It's basically dangerous to drive. Goes full gas at the smallest change and continue one second extra after releasing the gas.
Is there any way to return all the settings/firmware to stock? Atm I wouldn't let my kid use this.
finally i did it after 2 tryes it works.
i set it eco = 10km, drive = 16km, speed = 24km my perfect speeds for food delivery i been trying to do this for months
dacă-i prea repede te încurcă la livrat?
Mines stuck doing 15mph in s mode it's the xiaomi pro 2 will it go faster iv follow this vid but it it's still the same?
Hei after I flash my file it doesnt seem to want to load meaning ,nothing happens when I press the load button..it has before withal different dashboard ,well anywhos my friend did it for me and I think that's why it wont let me load the new upgrade..it can it only be done by his phone then since he was the one who upgraded it
I have a cybersoul x3 pro. I want to tweak it up aswell. Is there anyway to do it ?
Nice tutorial! I just bought my first scooter yesterday its a xiaomi mi 3. I am confident enough to try tweaking the scooter through your video. Any recommendations about the settings?
try staying below 750W, and if any drive train parts fail, be a good guy and don't send it in for warranty
replacements are cheap& super easy to install
otherwise we risk these becoming as hard to flash as iphones
I have a Pro 2 will something happen if I set my Sports Amps to 35 or 40 so I get a good speed
When I’m going downhill what do I press for the motor to not slow me down?
hello, will it work with the pro 2 mercedes amg version?
hi i bought my new pro 2 wanna try this but i already upgrade my firmware is there any step i need to do 1st
How many watts it's going to be with that and what is going to be the top km speed? Thank you
My brand new scooter's set up process seemed fine out of the box, before I made Mi's firmware update from within the Xiaomi home app. After updating the official firmware through the Mi home app, the LED dashboard is now always off/blank while the tail/break lights are blinking for a few minutes after which they turn off. The scooter is unusable, yet brand new. Must add that it isn't also possible to pair add it to the app any more; it says no scooter found. Any advice? This is driving me nuts to be honest.
try seeing if downG or the scooterhackinh android apps can connect to it .. otherwise either send it in for warranty if that's an option, or look into st-link reprogramming of the BLE, DRV and BMS components (first is the dashboard with its bluetooth module, second is the motor controller, third is the battery manager)
Any way to do this without an android phone ? I only got a pc and my Ios
Hi, why cant i make it work on my es4? I folowed all the steps but it dosent work? :(
Hello. I tried flashing my scooter because it was in both D and S mode going 31km/h. I bought the scooter second hand and I wanted to flash to to original again. Unfortunately after flashing it, it didn’t work and still goes 31 on both D and S mode. Because I really want to reset the scooter back to normal, I want to ask if you know how this could be. I’m looking forward hearing from you and I really hope you can help me😅. Kind regards,
Sander
Why in ECO mode i drive only 5km/h? Why my rear light dont strobo , only flash? Why my charger dont stop when is 100%?
Cool tutorial, thank you!
Thanks for the great video. I just bought pro 2 and I would like to start modifying it, but I'm not aware what's going to happen if I flash an older version of drv. Currently the scooter is activated and running on drv 229, bms 128, ble 132. Please let me know if it is safe to flash older versions. 💥
it's super safe to flash older firmwares ✌️
you're good to go 🤘
Quick question.. so all modes run the same thats not an issue did read befire hand it might happen and how to resolve it.. question is.. if going them speeds in eco or walk with the settings in video will it damage motor/battery.. and if not shall I just rode around in eco cause it's set to less but goes same speed? Thanks again
could you rephrase the question - I didn't quite understand
@@Darieee thanks for reply.. because D mode goes same speed as S should the amps be set the same for D as with S
you need to differentiate between torque and top speed
torque is how hard the thing pulls you when you hit the gas / or / how steep of a hill it can still climb (that is the amps figur)
and top speed is governed by your battery voltage (you'll see the wheel spinning freely at a significantly lower speed when the battery is discharged, even with no load)
more amps will get you to your top speed faster, and more inefficiently, as all the losses go up exponentially 🔥
@@Darieee thank you... i get it now 😅🙌🏼
where is the scooter app u are using on your phone ??
Hi, I did everything same and the result is amazing. Thanks for the tips, but I have a question: After upgrading firmware to custom, the battery chargers light never turns green even battery is 100%. What is the problem and how can I solve this?
Did you solve it? did you saw green light again?
How fast did it go
@@abdulhadialjumaa7826 I've seen max 39km downhill, and 30 km flat road. Ps. I am 96kgs
I had the same problem.
@@goktanambarc9016 and battery feels ok? What distance you can manage?i dont know m6 weight 85kg what setting best to choose, to get best comfort and safety to scooter
Thank you so much for your video!
I've bought today my Mi Pro 2 AMG edition :)
Do you know if any differece regarding this edition in terms of firmware?
When i've connected it to xiaomi app did asked me to update software... wich I didn't :)
awesome ❤️
there shouldn't be any firmware difference - check my 10 minute pro 2 firmware video - that should get you up to speed real quick 🔥
@@Darieee I've already done it and worked fine!! Now I have top speed 31kms/h and also feel it more stronger (even that I've used some values a bit lower than you show on your video)
After that I can't use the xiaomi app anymore as fail to connect... What app do you use to check speed and battery?
you'll need m365 tools to do that going forward
unfortunately android only for the moment
i don't get it, did they remove the option for Scooter Companion?
Hi can someone please help me? So Ive up my scooter from 25km/h standard to 30km/h, but sometimes when it goes to 33km/h in the downhills, it auto brakes? How do i remove that auto braking?
Thanks for the video you convinced me to cook my own FW..
Just got a pro 2 with DVR Ver: 2.3.6 do you know if anyone anyone has cooked a FW for one?
Just want to make sure there is no added security meassures in place.
the version doesn't matter - just flash whatever version scooterhacking gives you 🤘
@@Darieee I did the hack and everything works perfectly. No app issues or error codes.
awesome -- have fun 🔥
I followed your instructions, everything works except the speed, it doesn’t go more than 27km/h instead of 45km/h. Please help. Xiaomi pro 2
Hi, can you use the firmware to lower/limit the speed for example on Xiaomi Scooter 3 for the kids?
I may make a video on the mi3 got it to go 45 on full battery never seen it before
what does the error raising level mean?????
I did everything, I chose all the options exactly as in the video, I reached the step where you donate (otherwise you don't receive the file), I donated and guess what, nothing happened. I went back, I searched through the files on the phone, in vain (no file receive)... honestly it's a waste of time and money.
Now if I go to the page, every time for every download of the file/ settings that you make asks you to donate...wtf.
I have tried to tick the brake glitch, but can't make it work...
Dear All! It is work also in case to iEZway pro m365?
pro 2 01/2022 can be unlocked at 30km / h?
I can't see the "remove 30km/h speed limit" option
Is it possible to do some kind of dual booting. I have heard that you can boot the overclocked (illegal in my country) firmware, when holding 'break' and 'power' when turning on the scooter, but if only turning on the scooter with the 'power' button it uses stock settings (max 20km/h), great when being stopped by police and they test the speed...
yup - on scooterhacking you have the Presets tab at the top
there you need to tick brake glitch
Please help... On my pro 2 32km/h worked right after flashing, but when restarting, I can't get into that mode again. When scooter is turned off, I hold brake and short press power button. Immediately after boot I let go... But it still only runs 21km/h... If I hold the brake red number 15 and wrench comes up in the display.... The only way of getting back to 32km/h is setting it through the shooterhacking app, which seems risky... If stopped by police...
If this bricks (kills) a Pro2 how can we restore firmwire? We would need special wire and soldering iron?
I just ordered one of these yesterday, but before i want to do this mod: is this safe if i follow the same steps? Because i’m scared i might brick it out of the box.
very hard to brick these - but, maybe leave it stock for a day or two until you get the gang of it
it truly is dangerous going 30kmh if the road isn't perfect
@@Darieee I did exactly this, have used it for couple of days with stock firmware. Just upgraded using your video and it's so much faster! Thank you very much. Flashing the firmware with the app was very easy.
for 84kilos what power select for sport d eco ?
hey mate, If I was to firmware hack my pro 2 by only changing the speed limit on drive modes and something goes wrong with it, will the scooter still be covered by warranty if I reset to default settings via xiaomi app by updating? I really want to do this but I am worried if anything happens the warranty wont do anything about it
Also if I do update it for default settings is there a risk of the scooter getting bricked?
the scooter can't really get bricked - there is always the option to buy an STLink programmer and recover the controllers that way
it's risky with the warranty though
Can I use this on the 1S model?
is this gonna work on nordic editon
Hello , i ordered dashboard from Aliexpress...they said the BLE is 0.9.1 what is the procedure now? i flash with BMS 126 and than DRV 155 ? or i need to do something before ?
Thank you.
I guess you can flash anything you want
I for one had better results cooking with pro2.cfw.sh - that cooks on top of 2.x, and yields a somewhat lower top speed, but is way smoother
BMS I usually leave as is
the dash might come with a 9.x firmware - indicating it's a clone
in that case you should try cooking for downG and scooterhacking - one of the apps may fail to flash via clone dashes at times
Is it possible to increase the motor power but leave the top speed at 25 with software hack? Is there an objective test video comparing the standard and the flashed acceleration or hill-climbing ability?
you can totally increase the power and keep the 25 kmh limit
just remember not to enable DPC, as that has no speed controls
just leave the acceleration algorithm to speed-based and play around with the top speed numbers
We have tried this with my mates scooter but there is a delay once we let go of the throttle so the speed is still on for about a second after we let go? any fix on this?
I think that's just due to either the older firmware used by the CFW builder
or maybe the russian power algorithm I recommend - try doing a firmware with that off
Please explain I have the same issue
Thanks for taking the time to do this it just worked flawlessly on my Pro 2 (2020 model), may help it move my bulk around easier set at 30amp! I rarely use the scooter & only for short trips (with a few hills) do you reckon I’d get away with higher amps or best leave at 30? 👍🏻
I've been experimenting with incremental increases. I'm currently at 34amps and it's doing quite well. No Thermal warning or anything as of yet. I do have KERS off though.
@@callenpeel4404 I actually did same 34amp after my post & while I don’t ride it much it seems to run fine 👍🏻
Thanks. It helped me
Is there a way to do this on iPhone?
I have one question, when speed reach to 30 it starts beebing, do i need make new flash and set that beeb off like that or is there somewhere in this app that setup button for that?
you need to tick the beep disable ✌️
Thanks, and sorry mine dummy question i was so adhd when i did this first time that i didnt put tick on😁i thought that it is on when that tick is empty🙄10000000things in my head at the same time🤯syntax error💥😁thanks again🙏🏻
no worries - I can relate - I work the same 🤣
once a professor told us 3 times to write all answers on the question sheet - he repeated that so many times I thought something must be up -- wrote everything on a separate sheet -- failed the exam 🤣
How can fix firmware that my scooter goes faster?
Plz help
thank you for the videos :)
my pleasure ❤️
any help for olsson fresh wild red??
How do u get into the app? (Help
)
a want to go faster wats the highest you would recommend
30A with unmodified hardware
if you reinforce your controller - I have it on good authority you can go 35A
also - that doesn't make it any faster, it makes it quicker
it only accelerates faster - it still goes 30kmh
if you want to go faster than that you need to consider going with a higher voltage
Hey dude I followed exactly your video, but when I put it in Drive mode (25 A) It reaches 30kmh and not 25 kmh (like stock sport). I tried to put a speed limit for the drive mode at 26kmh per hour but it still goes faster than that. Any idea?
did you enable DPC like I suggested?
I think that bypasses all speed checks ... so ... perhaps have DPC set to always off and try again
I just noticed that the other day
Would anyone describe how to do that? thanks
@@BigGerosh do what? The firmware flashing?
@@mwhodatboi
No,to set DPC. I didn't see this statement
@@BigGerosh DPC means direct power control, you can see it in video, turn this functionality off and then flash it
Hello there . Thank you for the realy good video. I just flashed my m365 and I removed the charging mode to add an extension battery . The scooter goes very well without any issue . The problem now the indicator for the battery livel shows fully battery whole the time. Anyone knows how to solve the problem ???? What I have to do ? Shall I flash it again 🤔
Hey, I have a Xiaomi Pro and I'd like to have Pedestrian Mode instead of ECO mode like PRO 2 does; I set the max speed to 5km/h but going up a small hill will lower it to 1 km/h. The amps are set to 17A for that mode. Should I increase it even more so I can go up a hill with 5 km/h?
I use Scooter Hacking Utlity
to be very honest I never managed to get anything usable out of pedestrian ..
never used ECO .. but pedestrian makes no sense imho
I think that the starting speed of the motor is set to 5 to save the motor.... especially with a aggressive throttle curve. My motor never made any weird sounds until I floored it at a low speed it's saved me from getting hit. so it was worth it but now at low speeds.... like super low under 3 if I hit High throttle it makes a weird like humming... its hard to describe. I just don't hit the throttle when I'm going super slow I ease into it. I have to be quite aggressive on the throttle to make it do it. Thank you for making this video. I didn't know this software existed on a laptop. I've always used my phone.
I don't know .. I've had that 0km/h start speed hack for the entire lifetime of the scooter, and my pro2 motor never changed sound ..
it's weaker now because I overheated it a couple times .. buuut, yhea, apart of demagnetising my magnets by taking them close to their curie point (probably - it's how I imagined it all went down), I've noticed zero side-effect
I have also hade full speed map since start. Bought it two years ago and put 2361km on it!
Ive hammerd so hard any its still runs good 💯 Love to be able to do rolling burnouts with the front wheel 😂
What kinds of max range do you get per charge with the faster top speed? I get 32km of range on fhe stock top speed of 25kmh. 30kmh would be nice but don't want to drastically cut down range.
don't worry about the range - if you don't floor it too hard and have higher max amps - it won't be noticeably worse
and getting there faster will feel amazing every time - there's a very noticeable jump from 25 to 30 .. way more than you'd think
crazy settings
How can i fix firmware that my scootet goes faster?
Do you think that this setup will be good on xiaomi scooter 3 ?
I never touched a 3 ... there are some mentions of some updates to the cfw generator to support it so, it should be fine so long as you manage to flash it (via a clone or unupdated dash)
I dont understand how did he connect his scooter to his laptop. The settings he changed on his laptop how did it go to his scooter
Essential?
is this fine on the mi 3
Thanks :)
How fast does it go, 45kmh?
If I only remove speed limit, without changing any setting in power the max distance I can make is affected?
only slightly
try it out and see -- you can always revert back to a stock firmware from the xiaomi app if you don't tick the "version spoofing" check box
@@Darieee have you tried a 48v battery?
I would like to know the safe A and Phase current limits with stock controller and motor
i have a iScooter E9T, can you still download these files on to the scooter?
absolutely no clue ..
it works thans sooo much
Hi, I have a pro 2 scooter and I would like to remove the speed limit when leaving the place and the maximum speed limit, but before that I would like to save the current software, with what program can I back-up the actual software? Can I lose my warranty if I make these changes?
you can reset the firmware back to normal in the app
you can use scooterhacking to flash the default unmodified firmware back
if you burn out your controller they might not fix it under warranty - spares are pretty cheap though in any case
@@Darieee where can I find the default firmware. unable to find it.
the scooterhacking app (android only) has a setting for a default app ?
Hello! Can you explain what DPC is? And also would 28A on sports make it go 45kmh+? Im very lightweight. THANK YOU! 🙂
the max speed you can go is whatever the wheel spins at when you lift it off the ground ..
it depends mainly on the voltage you supply to your controller (half battery - ie 37v will spin the motor at 25kmh .. fulk - ie 42 will do 35kmh)
I think it has to do with the time it takes to build up the magnetic field on each cycle
if you want to go faster you'll need a speed battery (ie a battery placed in series with the main one, to increase the overall voltage)
Once again Thank you👍👍
have fun man - no worries 🤘🤘
Idk did the same and it said error ( max retries)
Grazie amico
hello, I'm French so Google translation, I don't understand what this "brake light mode" setting is for, it's when you brake, you choose how the rear light comes on? Or is it permanently on? Thank you
Hey bro i have a pro 2 and i just had it repaired with a new display but now when it shows up in the scooterhacking app it shows as a pro 1 (or just pro) do i download a pro 2 or a pro zip then?
never encountered this .. do ask on the scooter hacking facebook groups/forums
and do let me know as well I'm kind of curious
@@Darieee i think it just shows as a pro because of the bluetooth part is in the display and since the display is from a pro that's probably why
@@Darieee well ive gotten no help from any facebook groups ive tried so i dont know what to do...
hmmm, if I'd have to choose I'd probably also cook up a pro2 firmware ✌️
I would recommend disabling KERS to lower the stress on the controller, this also means you can cruise without constantly having to be pressing down the throttle on flat ground or when you ride downhill. The auto regen braking shouldn't net you much anyways.
I recently flashed mine with the default/factory speed-limiting throttle, will try that for a few days before trying DPC, my only worry with DPC is that I will lose the ability for shorter peak currents going uphill. Also you have to feel comfortable with knowing the longer-lasting effect of a specific constant current, as wanting to hold a specific speed at any current moment depends on wind, level and type of ground your riding on.
Also, having a dashboard app (and phone-mount on the scooter) that shows your current usage live would be a good reassurance though.
will be getting that m365dash any day now ❤️
as for regen/kers - on low - it won't pass more than 200w through the controller as far as I've seen
I live in a >super< hilly city so - if I can pump 200w for 10 minutes into my battery - I'll gladly take it 🔥
plus - I'm also a retard and often times find myself talking on the phone while riding (albeit a lot slower), and, kers does allow one-peddaling the ship quite smoothly - especially with a super slow ramp (180 I think I used)
good day guys. question about "kers" so if i disable it it will drive smoothly on downhill without having feeling that it breaks when it reach the top speed.
nono - KERS has no effect when you press the gas
that limit is enforced by either your firmware (you can disable the 20/25 limit), or by your pack's voltage
a stock 36v pack, charged fully to 42v, will usually spin the motor up to 33kmh
@@Darieee how can I disable the cruise control after flashing the CFW?
use the xiaomi app .. or if you have an android phone - m365 tools
Anyone know about updating an isinwheel i11?
Great tutorial but it does not matter what software u use it up to the hardware from the motors or other things in it