Great video! Thanks for sharing. But you should always perform the last step which consists in placing the new key close to the start induction coil and pressing the ignition coil for 10 seconds. Sometimes the new key works without this step but sometimes it doesn't, so the best thing is to never skip any steps.
Good day, I purchase a Autel IM608 then i notice there was a more updated one witch is the IM608 pro 11 so i email to get a refun so i couod get the new one insted before they ship it off so they did give me the refun, so my question is before i make a mistake again, what is the difference with the IM608 11 and the IM608S 11 or is it the same machine with two different name?
Joe, can you address what may seem trivial too many? Key orientation. First I've seen holding prox in that position. Most lay it flat up against coil vs. perpendicular, but require multiple attempts to read. Your thoughts? Excellent vid as usual!
I have a question about a remote. See if you could help me. If you don't mind, when you program a remote, why doesn't it beep when the keys in the car? Usually when you have the original it beeps and doesn't let it lock the car but aftermarket turns on the car unlocks the car
Love this video, its just what i was looking for. Im sure its the same process to program a key on a 528i with the otofixIM1 right? Looks very similar.
@jonathanromero8639 I did a test run on my 2015 F06 640i with CAS4+ using my OTTOFIX IM1 using this video earlier this evening. I tested up to the point of programming since I don’t have a blank fob yet & all the menus are exactly the same. It appears that the IM1 is capable of OBD programming just like the Autel. I used my IM1 with the included XP1 key programmer to program a new key for my 2008 E60 528xi with CAS3++ & it did it within 2 minutes! I followed a video for the Autel IM508 to do that one. So far the IM1 has been very impressive!!
Great work, Thanks for sharing BRO😍
Great video! Thanks for sharing. But you should always perform the last step which consists in placing the new key close to the start induction coil and pressing the ignition coil for 10 seconds. Sometimes the new key works without this step but sometimes it doesn't, so the best thing is to never skip any steps.
KING 👑
Did u hold the key to the coil and push the start button for 10sec ?
Thanks for the video
Can the back up coding use to restore CAS module if break?
Good day, I purchase a Autel IM608 then i notice there was a more updated one witch is the IM608 pro 11 so i email to get a refun so i couod get the new one insted before they ship it off so they did give me the refun, so my question is before i make a mistake again, what is the difference with the IM608 11 and the IM608S 11 or is it the same machine with two different name?
Super , thanks for video .
Joe, can you address what may seem trivial too many? Key orientation. First I've seen holding prox in that position. Most lay it flat up against coil vs. perpendicular, but require multiple attempts to read. Your thoughts? Excellent vid as usual!
Jack I have a post about this on my VIP pages, www.patreon.com/posts/bmw-f-series-key-84521896?Link&
where do you buy this new key please?
Great job! I like it
I have a question about a remote. See if you could help me. If you don't mind, when you program a remote, why doesn't it beep when the keys in the car? Usually when you have the original it beeps and doesn't let it lock the car but aftermarket turns on the car unlocks the car
Thank you brother
Great video
Good job 👏
perfect ❤
Can you do 2020 RAV4 akl smart key with im608 pro
Yes
Does it work for COMFORT ACCESS as well?
Is it 100% can for im508? Or high risk?
Im508 can also do it. Yes it is high risk
Thank you
Where You Buy the BMW keys?
Uhs-hardware.com
@joe comment reparer cas si on echoue a la prgrammation via OBD ?
hi, how did you maintain the battery voltage? 12.9v Which tool do you use mate?
Schumacher
Super 👌
Love this video, its just what i was looking for. Im sure its the same process to program a key on a 528i with the otofixIM1 right? Looks very similar.
@jonathanromero8639 I did a test run on my 2015 F06 640i with CAS4+ using my OTTOFIX IM1 using this video earlier this evening. I tested up to the point of programming since I don’t have a blank fob yet & all the menus are exactly the same. It appears that the IM1 is capable of OBD programming just like the Autel. I used my IM1 with the included XP1 key programmer to program a new key for my 2008 E60 528xi with CAS3++ & it did it within 2 minutes! I followed a video for the Autel IM508 to do that one. So far the IM1 has been very impressive!!
@@marcwoodward8056 Did it work on your 2015 with a blank?
Hi , can you add 868mhz key same way on F10 2016 with autel Im508s? Thank you
Thank youu
Can this be done with KM100?
yes
Can for km 100 or not???
No
Is all keys lost possible via obd 2014 bmw 535 with im608 pro
Watch out it’s a bench one
Hi bro in add key no need to read ISN FROM ecu
Top tenho imo508 agora aqui nó Brasil nome de Jesus nós vamos fazer chave de BMW sem precisar desmontar glória a Deus 🙏🏿
Where can i get a working key?
N❤