DEEPSEA MODULE defective, not communicating, memory corrupt, no display, how to fix it? benzblogs
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2021
- in this content, I explain to you how to recover or fix the defective module, how to work it back as a normal working module and here I teach you how to flash and update the module back to the normal condition.
Kapatid i have a Cummins qst 30 with gcs and dse 7310. It gives ecu shutdown after crank. The ecu fault flash code is 1211.i swapped the mpu it would crank for a bit longer but then again ecu shutdown code again
Thanks for your explanation. Best wishes ❤❤❤
Bless you sir
@@benzblogsVlogs Thank you sir 😍😍
Chrck mo po sa video ko meron doon
I have a similar problem to the 7410 MKII model. I have updated the program and before the download is completed, the update stopped and a note appeared on the model’s screen. memory corruption refer to manual . What is the solution please?
What firmware update you did just put the latest updat on it like if version 1 update it v1.1 or 2 like that in order to work make sure update is propperly done
Thanks my brother..watching from the Solomon islands...
Welcome sir have a bless day
@@benzblogsVlogs my brother.. I've try to solve that problem memory corrupt..but when update using update firmware it stop bcos there is a password on the deep-sea electronic control board..what is the next step?
@@DaveTopi-jb9ss its should no password make sure that previouse config did not put any password from the module coz should not be asking pasword during update
@@benzblogsVlogs my brother good evening...we have put password on scada>maintenance>module lock.. someone try to change the setting..somehow memory corrupt..cfg1 eng1 and etc appears on screen..therefore we use update firmware but on process it stops updating at 71 %
@@DaveTopi-jb9ss thin try to use lower version
My module is called DSE6120 MKIII. The problem is that the generator output is measuring 234 volts Phase to Neutral, but the module is reading 275 volts Phase to Neutral, causing the generator to shut down, what could be the problem?
Give datail of your voltage output and this is single phase or 3phase okay
Thanks for the knowledge share, how this flashing process works and to removed Membre courrpt or Comm faill. I am encountering this problem now
Shukran/ thank you
@@benzblogsVlogs Sir I am awaiting your reply
merci beaucoup pour ton aide cela a fonctionné pour moi !
Yes sir do this check your battery if good condation check the fuel thin try to bleed to remove the air in the fuel galery agter that start again use manual pump at same time crank it
Por pabor english pls.
@@benzblogsVlogs lol that was french and it’s por favor
it's always good to have both options on the table concerning panel rectification. can i please get to know about the flashing procedure as well please?
Open the dse config thin go update firmware and di the conrrect model what you wabt to upgrade done
Yes
Go to your app thin connext module to the latop and find the upfate firmware after that onece you click its show what type of module and version u want juat follw instruction deepsea give
hi there, can you please help me out with the link that re- programs those panels and how it can be done?
thanks
Just what modulel of the module so we can identify
Thank you sir the module reading is different from the measured output but is it possible to adjust the module with DSE system?
Not posible we can calibrate the reading or dse module unlike compap you can calebrate
I have a same issue a green screen no display. where can i find the flash file for the DSE 8610MK2 . Thanks for sharing your video. appreciated.
Bless u sir
Help with the link for the flashing. And even while working on the Memory Corrupt, I didn't see what you operated on the laptop, the camera is only showing the display board of the DSE.
Ok even without flashing i found out just go in the app open deepsea thin go to click the firmware update thin select the model ang version of your module thin write it ok thin back to normal
Thank you for the help however there's still more. When the panel doesn't display and just the LCD backlight showing but still works with the buttons. What are my to do. Do I need any flash file and how do I get it to return to display.
@@benzblogsVlogs i tried to update my deep sea 6110 MKII controller but the display is still green
@@ayazshah8453 of this green means defective already try to open it check the rebon inside
@@benzblogsVlogs along with green screen warning light is blinking
hello i have a problem with my DSE 6020 MKII which can not come on when i put the power inside but when the computer is connected through the DSE software it can come on . what could be the cause of that?
Just update the firmware to make it easy or if replace the lcd
Hi thanks for this educational video, how do I get hold of that link you mention for the flash file?
No need flash just update firmware
Thank for all you do here. i have a DSE8610MKII that is displaying MSC data Error hence it is not communicating with the other DSE8610MKII is the synchronizing panel. how do i solve this problem thanks
Check how many pcs you synch thin end to end should have 120 ohms thin double check the connection if there is wrong or ither reversly connected or cut thin if same msc fail ahm check the multiset in the config ither wrong program
@benzblogs after flashing our module and all lamps are red instead of making configuation manually as you did in this video; can we also copy directly to another module wich working and paste on our modeule directly
You have to do it manually to other
Why its red light all meaning no program at ll need to do it again
Hello, I have a 7320 module which working fine but no display. What should i do to fix that. Will Fireware update fix the issue?
Just open check the rebon remove clean it and insirt back kalas done
Can you assist me with a dse 7420 flash file, am having a similar issue but mine is coming on just that the display isn't showing anything
No need flash file just update firmware and follow inatruction thin all is good
have a similar issue, my module screen went blank... back ground light is ON but nothing displayed. no lights on the start or Man.
Check first open the module check the LCD if the rebon is properly installed or clean it
hi there, i tried updating firm ware but the system stiull fails to get back to normal. cam you please teach me how to flash the deep sea panel?
What is the problem with your module pls
Hi Benz, I have the same problem on a Deep Sea 335. the error message displayed: ''Memory corruption Refer to manual''.
can you help me with the restore procedure or the link for the Flash program.
No need flash juat update the firmware version
Or if you have a config file dame version of the module write it done
thanks for your teachng, may i have the link of the model 7320 falsh plus file and a text format tutorial ? thanks very much.
Sir no need now not mesesary juat open deepsea config connect the defective module find the update firm ware and follow the instruction there that it
Hi brother
Can show me the link for reprograming the deep sea module which dont have any display light and indicator light on. Genset at rest mode.
Just open and check the lcd ither defective or rebon is dirts need to clean
Good job sir
Thank you sir
We are encountering an error with DeepSea Module 7320, which has been unused and is displaying a calling application error. I have attached a snapshot of the error for your reference.
Check the config something wrong
hello, good night, I have a deep sea 7320 which presents the common ac fault, and even if I flash it, the fault continues to appear. I hope you have a good day and thank you very much for your help.
Sir do you have picture on that so i can really identify
@@benzblogsVlogs yes, where can i send it?
thanks for this info, but how to get the flash link for deepsea 7320 ?
Now as new update flash link is not nesesary just update firmware thin kalas afyer that config back and its work juat follow the process
I have a DSE 7320 Module that display does not show anything. I have updated the firmware but the issue still, how can I fix it? Thank you in advance.
You can try to open it there is one rebon there try to remove and insert back due to vibration and dust its happen sometimes
@@benzblogsVlogs Thank you so much, I will check that and I'll let you know if it fixed.
Welcome sir
It fixed! Thank you so much for your advice.
I had commented about my defective dse5110 .
You responded to my comment but found later that the modules I was buying wasn't at all authentic Deep Sea Modules.
These were cheap Chinese manufactured knock offs and made to look like Deep Sea Electronics modules. They even use DSE logos and claim to be Deep Sea Modules.
That's exactly why these cheap imitations won't at all hold up and stay working correctly.
With this, I contacted DeepSeaElectronics in Chicago Illinois and placed an order for the Deep Sea Electronics DSE 7210 MKII with Heated Display.
Sad this is the problem that its good to buy authentic
Sir goodday pwede magtanong if what part number of engine oil you normaly use from generator fgwilson thank you much
I give you the ths spic tomorrow
sir i connected dse 4520 controller to my pc.
but controller detect model no. 4523. this model not availble one dse website. pograming procces not done.. please help me sir
Check if this is genuine product if not not possible to config using software ither do manul config
Hi Benz…we having an issue with our gen module regarding corrupted memory…I’d appreciate if you could assist with the software download link…thanks
It’s for dse 7310
No need the link just update the firm ware link now is not working ornly update firmware ok
Boss our controller shows *memory corrupt*but this was done due to the dead of CMOS battery I replaced the battery but the problem is still there,so how can I rectify this problem
You have to update firmware
Hi can iyou give me the link for flashing please 🙏🏻 my modul all so thesame (memory corrupt)
Sir no need what ever the module your doing just update it at higher version of same type of the module go the the latop open deepsea in the top you cleck the update firmware and follow the instruction geven to by the deepsea app while doing the update ok
Asap me so i can give you instruction how to do it
@@benzblogsVlogs iam still trying to update firmware
And still waiting for begin
How did you do for update firmware
Send me the picture module at the back soni can see the model so i can send you the flash file send me your email in benzblogs measanger thank
I tried to firmware update my corrupted memory module DSE7320 but it istel not working. Can you please help me?
Make sure your correct firmware and updated your sofeware
Nice 👍
I have problem with dse7310 control panel
BRUNO GENERATOR
Display lights up but no words
Buttons work e.g engine starts bit then it will cut out after 5 seconds. Your video shows buttons not working. Can I re program this?
If no display sir check the rebon inside of the module or ither disply is defective already
@benzblogsVlogs ribbon looks good, do you mean continuity test? I plug them out and in again in case it was a bad contact but made no difference.
@@jon44sweeney meaning lcd is the problem with this module
Hello sir..
How to fix communication failure only when we want to write configuration to module DSE 7420 MK II? But the application success to read the configuration from the module. Thx..
Check your usb if connected prperly snd if same update your sofetware
Have a power zone model number 7741 need programming to relearn any help?
What you mean sir what program
@@benzblogsVlogs the controller needs to be reflashed.
@@gabrieljacquez4058 the problem is if i give u a config my be it not match to your module version
Display backlight not switching on.. but info shows on display in black and white..
Just adjuct the contrast using the laptop
How , to do with the dse 7320. When it gives Ac Comms fail. Can you share me the link on how to fix it and the flashing file.
Thanks
Ac comm fail?
Waht module you are using
If that is the alarm meaning check the fuses and the voltage
Hello, Can you please give me the link on how to communicate with dse , i have memory corruption . Thanks
Just simple open your deepsea connect to your latop open config in the top you can see update firmware thin follow the instruction select the latest version done
Thank you I like ur training, may I follow you
Thank you sir have a bless day
Sir kailangan ba talaga ng flashfile?
7320 new module does not communicate with my laptop usb says doesn't recognized?please help me
Just update the sofeware make it updated
Hi I can't update firmware my 7320 module doesn't appear on deep sea configuration software
Sir i had 6010 MPU V.1.
5. The timer symbol is always and i cant start the genset.even i lower down all timer setting but its always on. Whats the problem
Is this new install module or you did the config
New
sir, am trying to flush a deepsea panel 7320MKII. You said you would send us a link to help us during this process but it never comes. can you please help us out with that link for flushing?
I seed no need link you do it without it coz im in vaction that why i font have my computer
During the proces open deepsea connect usb to the latop and deepsea put supply for deepsea thin in the aplication click in the top firmware update thin look my yt how to do it
hi sir, thanks for the good work. please send me the flash file to flash a blank screen module. thanks again. please keep the good work up.
Sir no need flash file for that make sure led button is light thin try to update firmware version only
@@benzblogsVlogs ok sir, thanks
I also have new 7320 that stops communicating, doesn't display light at all how do i fix it pls. Thank you sir
Do one thing connect paower supply after that connect the usb to the latop check if any communication betwen your deepsea and the laptop if there is thin update the firmware if no thin meaning to say that your module if fully deffective or not posible to repair
Good day sir
Pls can I reset a red alarm on the module and amber indicator
No you need to rextify first before your can reset
i only have dDSE confoguration suite how can i fixe the issue ?
To make it easy just update the firmware of that module thin follow the instruction from the loptop
I've got the same configuration suite, when you figured it out let me know.
Thanks
My module is called DSE7320 V7.0. The problem is "MEMORY CORRUPT REFER TO MANUAL", When I try to update firmaware to the lasted version 14.0 the dse config show me" INCOMPATIBLE HARDWARE
UNIT IS MODEL CODE 7320, MODEL VARIANT 0, HARDWARE VARIANT 1.
FIRMAWARE FILEIS MODEL VARIANT 0, HARDWARE VARIANT 2."
PLEASE HELP ME Mr, thank you.
Thin try yo downgrade there is no issue
Thanks Mr,
sorry, but i dont understand your explanation, i try downgrade in config suite or in dse site?
please helpe@@benzblogsVlogs
@@user-bm4on5rx3f due to not allow the company rules
@@user-bm4on5rx3f downgrade the firmwarevrrsion
good job pare.
Salamat pre
good day sir.. my dse 6110 mkii auto start showing memory corruption refer to manual..pls how du i fix with my pc
Just do update firmware and follow instruction while updating okay
Sir, anong compatible laptop para maka download ng software, windows 8/10, 32/64 bit? tsaka po anong gamit nyo na cable to connect from laptop to the unit (DSE 8610)?
Usb windows 10
Go yo website deepsea make account so you give permation to donload the app
Sir I have one deep sea controlar 7510 problem bms alarm waht happened pliz tell me
Bms mean its not communicating send me pic
I'm having this same issue on a deal sea 7320, can I have the link please
No need the link justupdate firmware and good to go
I am having the same issue DSE memory corrupt, how can i get it solved?
Did you check the video? Follow update firmware and that it
I have a 8610mkii with memory corruption how do I repair this
Simple just update firmware no need flash file
Thanks please how you can help to get the flashing link
No need flash just update firmware finish
hola buenos dias tengo ese problema con mi modulo ya descargue el sofware pero no me deja hacer nada
Hello sir what the problem of your module by the way charginging failure?
Hi, Bro.. how are you ? Hope you are doing well.
I am SALIM from Singapore.
I have watched your video.
I have a device model 7320 which is the same issue as mentioned in your this video.
So please advise me to solved the issue and share me to link and flash file.
Thank you 🙏
Sir for now have update deepsea but try it if still wprking try to update the firmware if your module to higher version that it
Hi sir..can you pls help me with the link for the flashing and how i can do the reprograming pls. Thanks
No need the link just update the firmware after that it will be back to normal
Alright..thank you sir, i appreciate@@benzblogsVlogs
hi, I have 7320 model it is show on screen a memory corruption ,what the steps to recovery
Simple thing open your latop connect your deepsea go to update firmware update it in higher version and follow the instruction what computer says that it and also follow what i do in the vedio
@@benzblogsVlogs i have this problem to with dse7320 to, what step i need to do, i see your video but i dont see your leptop screen and how you do it, so please what i need to do mister
@@khairulanam6395 simply open deepsea config connect the module and ho to update firmware update it in higher version and follow the instruction during process
@@benzblogsVlogs oke i wil try, by the way thanks for replaing me ☺
@@benzblogsVlogs thx, my genset was fully working now, thanks for your help brother
My dse7320 also has the problem of "memory corruption". Can you tell me the specific operation in detail? I am an idiot😢😢😢
Update firmware
Hello friend, thank you very much for your video, I'm following you from Angola and I have a deap sea 6110 module that suddenly its screen had first turned to writing and now it turned black. Can you give me a tip on how to resolve this? I am grateful to you from now on.
If only disply is gone and its working meaning ither lcd is problem or just adjuat the contrast of your lcd now if still same thin open check the ribbon of it clean it and put it back
@@benzblogsVlogs thank you so much
Hi, does flashing mean firmware update?
Its little defferent but also in firmware you can do and solve the problem
Where is the link on how to fix the corrupted memory please?
No need the link just follow update the firmware that it just make sure that you softeware is updated
I have dse 8610 mkii memory corrupt how do ido please help
Pls update the firmware to lataste of downgrade so it will become new again but make sure you can do the configuration after the upgrade
Hello Sir please i need your help I have dse7310 MTU Generator my display is showing memory corruption refer to manual and AC comms failed. Please what can I do. Many thanks in advance
Just update firmware version but im
Not sure now if still working that process coz deepsea update the config software
Thank you very much Sir i do appreciate
Hello sir, how do I get the flash of a thing?
Sir no need falash juat update firmwar to updated version done its work
Hi where i can find de link for the software
No need the link just update the firmware and done follow theninstruction tgat give to you after that finish
Hi I'm Boakye from Ghana please my module screen displays memory corruption and in this video you reset the same memory corruption but you didn't show the procedure so please make a video to teach us step by step.thanks.
Just update firmware
How to do it?
I've got the dse5110 v4 i need the flash file for.
No just update firmware thin kalas
please how can i flash 8610 MKII?
No more flash file needed go to you computer just update the firmware of your module after that follow what is the instructiom given to you there that it
where can i find the flash file? thanks
No need for the flash file sir just need to update firm ware and follow inatruction while process
Hello sir i need help
I want to change engine run time
Go scada maintenance thete you can find
me podrias apoyar con el archivo plus del DSE7320
Nice work sir, please how do I get the flashing link?
Sir no need flash link now you need to do is only update the version to higher that is
Yung DSE 8610 MKII ng cummins genset namin, pag start mo nag crank sya at umaandar, ang problema wala syang display na voltage, speed, frequency as in no display ng parameters. Ano kaya problema??
Check mo sir gamit multi meter para sure kong may volatge talaga after kong meron check mo sa likod ng module yung wire na V1 kong may pomasok na voltage okay po
@@benzblogsVlogs wala sya kahit ano, hindi lang po voltage wala, pati rpm, frequency wala din
Ang nasukat ko 2-3V lang po. Hindi po kaya loss of excitation?? Paano po mag excite??
Hallo sir im from Botswana
Im having a module 7320 dse saying
Memory curruption
Help me with the steps please
Follow what in my yt juat update firm wate no need flash file
Can you please share the data for this corrupt module problem?
For now no need its only update firmware thin all the problem gone afyer update do the config again
Hello boss i have defective dse 7320 it is always reset could you help me thanks
If always reset try to update firm ware of if not working hy update replace the battery
@@benzblogsVlogs is there any video how to update dse7320
@@benzblogsVlogs it comes up (starup) and after few second restart
Sir benz, magandang araw sa iyo, i have a deep sea module 6020 mkii the problem is i can't edit any parameter in this module and all indicator lights are lit, is there any solution on this?...
Just update firmware that the solution
Copy first the config before updating the firmware
@@benzblogsVlogs Sir, lastly if i have 2 DG and if i bond their both neutral while running, is there anything will happen?
Hi bro I have facing same issue how to fix it can you please help me
bro just open the deepsea app thin find the firmware update and follow the instruction during the process using the highest version during a firmware update.
Hello, link on how to fix a module with a memory corruption problem
Sir now hae new update if happen like this hust try to write back the config if not thin just update the firmware only that
Can you please give me the flash file link or more videos for defective and memory corrupt DSE7xxx
Or how do I get the flash file to resolve defective and memory corrupt issues on DSE 4521?
Sir no need flash just only update firmware so it work back again
Sir Good day..now ko lang nakita blog mo nagsubscribed na ako turuan mo nmn ako paano mag programm
No prob sir
Hello,
I have the problem of corrupt memory on my 7320, but when I try to upload thefirmware it does not start the process, after turning on the power it returns to the memory notification and the system does not start the data transfer, and in memory the usb is corrupt it stops working, how to solve it?
Sir only firm ware update you for that just make sure your usb is not faulty and correct firm ware accordingly to the type of the module ok
If u can show me how the process you do much good
@@benzblogsVlogs Hello,
i am connecting the usb cable to the controller and then going to option update firmware, then it asks to disconnect usb and power supply, then select firmware and they ask to connect usb and power supply, from that the controller does not enter in update mode and starts in normal mode with status screen and then goes to corrupt memory, at this stage there are errors in the usb connection!
@@DomingosVarela dont remove usb just off pwer supply
@@benzblogsVlogs power off and power on with same power source?
Hi bro.. How to recover manually memmory corruption
Dse 6110
Just update firmware bro that it to returen back to normal but you need to config again
Sir i have the same fault memory corruption what will i do
We use laptop and said disconnect the usb from the module and disconnect the module from any power supply
Yes only powersupply need to remove this put back
Dear sir
How I get the flash file for dse 3110? I need your help
Its with or without flash file just follow this go update firmware and follow there rest give u instruction in the latop
@@benzblogsVlogs i try to update firmware but failed
“Incompatible hardware
Unit is model code 65535, model variant 255, hardware variant 0. Firmware file is model code 3110 MPU,model variant 0, hardware variant 0”
Can you help me with this problem, sir
Thank you
The module has no display and no backlight
Greetings am Nicholas from uganda.
Help me with the flash file for deepsea controller.
No flash file just update firmware version
TKS BRO. DEEPSEA 7210 "MEMORY CORRUPTION REFER TO MANUAL" . HOW TO FIX IT
Sinple bro follow the vedio or follow what i say here
Open deepsea config click tools ,update firmware thin follow wizard quide through firmware update thin update it in the new update version ok
@@benzblogsVlogs tks bro so much. from Viet Nam
Welcome bro bless you keep safe
hi bro ...does internet needed when i perform the firmware update?
No need internet only need deepsea app
And update firmware
pls bro i will like you to help me with the flash file for 6110 module and how to do it.
As this years no jeed that flash file go to update firm ware thin follow the steps and after that done but if you have a new latest mk3 is not working now deepsea is update it my be because you know
@@benzblogsVlogs okey bro where can i download the firm ware software
hi sir it is applicable for DSE 7420MKll?
Yes pi any of the deepsea
hi sir can you give me the link pls...
Sir just go ditectly to update firmware and follow the instruction given to you in your laptop
Sir plz tell the procedure how to reset forgotten module pin of dse6120
Sir we can not change that even if you reaet it password nit changable you have to ask for dse costumer service
Ok sir thanku for response
Sir gud day ask ko lng nawalan Ng function Yung push button Ng dse 7220 nung una may ilaw pa SA push button tapos bigla nalang nawalan Ng ilaw at ayaw na mag command please response salamat po
Meaning ither hard ware of software issue nayan sire try mo save ang program tapos try monupdate firmware pag ganon parin palit kana ng module
@@benzblogsVlogs wala Kasi display to sir ung LCD Nia pero nag pa function Naman push button Nia nung una pero nung 5 times na namin ulit I test run wala nag function push button Nia Ty sir
Baka my moisture yan sa loob sir chrck monalang