Can you make an install video for the Dagger comp? I want one but I'm unsure since it seems like the set screws will hit the barrel threads and potentially damage them. I was hoping to watch an installation to see but I cant find one anywhere.
Hey thanks for the reply. I have a beretta 92FS that I’ve had for years with no issues. I changed over to the brigadier slide and at first the gun kept jamming, specifically the next round would get stuck in the slide before going fully into the chamber. So might it be that a heavier slide is the issue? Once I piled it up a bit more it was doing ok. The range employee said it was due to me not gripping it correctly but I’ve NEVER had this issue before. Oh well, thoughts?
What is the minimum amount of threads needed? On my Gen 5 19, after backing the comp off until the barrel is in battery I can see about 5-6 threads showing on the comp.
I bought an m&p trybe defense barrel from optics planet, it looks like a really sketchy site but I got it within 4 days. Haven’t tried it out yet because I’m waiting for my comp but you should check there and look at some reviews of the different options the have.
This is a non sense ! To put glue and what? Do you clean your gun frequently or never? What about to use a suppressor time to time? This kind of compensator is bullshit !
This is the most fudd take ever and I’m surprised no one corrected you. Blue loctite can be removed with regular pressure with the tool to install. And you can still fully clean without removing the barrel from the slide. You just take out the guide rod.
Put this on my Gen 5 Glock 26 and the recoil was night and day difference. No malfunctions yet with about 300 rounds so far
Awesome!
What barrel did you use ? I have a gen5 26.
@@Yungguna_ True threaded barrel
Will this work on Gen 3 Glock 26? Slides seem to have same shape at front end
Installed on my G26 gen5. The balance it created withe the 26 was remarkable.
Loving your stuff. Waiting patiently for the FDE dagger comp. 😅
Thank you! Hoping to get some more soon 🙏
Thnx Sir, installed on my dagger with your video assistant!! After optest, comments to follow. Cheers!!
Works as advertised. Only problem is set screws get loose after 100 rounds or so. I'll try more lock-tight. Cheers on the Product.
Seems like they would make these kits for the .40 caliber glocks since they have more recoil. I would like to do this upgrade to my gen 5 G23.
Can you make an install video for the Dagger comp? I want one but I'm unsure since it seems like the set screws will hit the barrel threads and potentially damage them. I was hoping to watch an installation to see but I cant find one anywhere.
Just got my HC10 3.0 for Christmas!
Do we have to replace the guide rod with a softer spring after installing this compensator?
What will work for my 2 daggers? Both are carry cut but one has the gator mouth opening. Looking for one that will look like its blended in.
Great video. I cant wait to install on my 34 gen 5
This is a stupid question but does the barrel have to be threaded
Dumb question but do compensators help with jamming caused by recoil?
No if anything it will jam more due to not enough back pressure you need a softer spring
Hey thanks for the reply. I have a beretta 92FS that I’ve had for years with no issues. I changed over to the brigadier slide and at first the gun kept jamming, specifically the next round would get stuck in the slide before going fully into the chamber.
So might it be that a heavier slide is the issue? Once I piled it up a bit more it was doing ok. The range employee said it was due to me not gripping it correctly but I’ve NEVER had this issue before.
Oh well, thoughts?
Are those set screws tightening down on the barrel threads or the barrel?
Same question.. hoping for a answer from him..
Barrel
What is the minimum amount of threads needed? On my Gen 5 19, after backing the comp off until the barrel is in battery I can see about 5-6 threads showing on the comp.
Do you need to change the recoil spring for this compensator?
Can you use loctite 242 instead of 243?
What pound recoil spring works best with the comp
Come out with a dual top port comp for Gen 5 Glocks. I will definitely buy one. 💯💪🏻
We have one! It's called the HC92P.
Will the HC95 work on a G34 with a stock spring?
Do you take the comp off for cleaning so you can take the barrel out or just leave it on?
you have to take the compensator off to take the barrel out
I have a gen 5 Glock 35. I see you guys have comps but I’m looking for a threaded barrel, any companies you recommend?
I bought an m&p trybe defense barrel from optics planet, it looks like a really sketchy site but I got it within 4 days. Haven’t tried it out yet because I’m waiting for my comp but you should check there and look at some reviews of the different options the have.
excellent video, thank you.
Glad you liked it!
Your statement about getting it off easily I would say is incorrect mine won't budge
is there a specific threaded barrel you recommend? i was going to just get the generic one off of your website?
Both options on our website have been thoroughly tested and work well with our comps :)
@@herringtonarms appreciate the response. gonna be ordering one
@@herringtonarmsThe comp works with the sw3 slide?
what barrel is that?
Love ❤️ it! Any coupon codes for your loyal customers?!
Use "best2021" at check out 😉
@@herringtonarms You Da Man!!!!!!!!!!
Why does there have to be a gap between the barrel and compensator?
I think you mean the slide & comp but it's so the comp doesn't slap the slide
Wilson Anthony Martinez Thomas Brown William
Why come out with something so inferior to whats we are coming out with now with radian and shadow system your comp is dead in the water .
Cheaper and still effective
This is a non sense ! To put glue and what? Do you clean your gun frequently or never? What about to use a suppressor time to time? This kind of compensator is bullshit !
This is the most fudd take ever and I’m surprised no one corrected you. Blue loctite can be removed with regular pressure with the tool to install. And you can still fully clean without removing the barrel from the slide. You just take out the guide rod.
Waiting patiently for more HC43 to be in stock