@@Ards.Mercantile People back them wanted to succeed at whatever means, but now with regulations, worker's rights, and environmentalists, well it has gone to the drain. People were tough, determined, and self independent. Nowadays, they blame others for their failures, expect the government's assistance by taxing the rich, and they always are looking on news ways to mess up things, my friend
6:30 Even the most basic of necessary safety is NEVER wear upper long-sleeve clothing while using a lathe, or at least roll your sleeves up above your elbows while using a lathe
I was more than a bit worried about the exposed drive belts everywhere as well. A set of simple guards they could have fabricated themselves would save a life.
You could easily implement a gyratory jig for the purpose of holding the disk while its being sanded. Sort or let the disk free spin while you position the angle grinder comfortably. Just a peg would do really.
If I looked at the part first, I would have assumed it was flattened first, then bent into shape with the pieces cut out, all in one go. Aside from that little bit of machining on the lathe, that's what I would have thought happened. The part was moving around a lot. I can only assume it was to allow various cooldowns/reheats between setups to give it more strength maybe?
I hope that, as a nation, they will earn money quickly and improve living and working standards. It is a very hardworking nation and I think they will succeed. At the same time as the West will fall into disrepair, focusing on form rather than content.
I've watched a lot of these videos of how things are made in other countries and this is the first one where one of the employees is wearing boots. Wonder what kind of Money they make. I've had a lot of shit jobs when I was young so I can feel for these guys.
As someone who has worked in manufacturing, machining, and carpentry I fear for their eyes and toes. I don’t see but one man wearing anything but sandals.
How do you work on the ground, in the dust, with open sandals and without the slightest protection? It sounds like a primitive society that should still be living in caves, even if provided with a hammer, dilapidated oven and other few essential tools!
Not much. But these men stand in front of the impossible and make something of it. Everyone dies at the end. What matters is how you lived in the situation you were born into
You have to love all the open toed shoes :) There are like 1 million safety issues with these videos. I bet most of them wind up with lung problems unfortunately. I am no way a safety karen but man, they don't even have the basics....really sad.
cool to watch but the complete lack of any safety gear or personal protective equipment is awful, your employer should provide safe working conditions for you so as to prolong your life and improve productivity
I cant imagine living in a country to where ya wore your pajamas to work. Their safety record must be inhumane. No wonder a 30 year old looks 80 over there.
How crazy it is that it's not for them more economical to buy the sheet metal from a steel mill, instead they employ lots of people and have to run demanding machines to flatten a railroad rail.
Now, @ 1:30 the steel is brittle enough, ( high Carbon Content..?) but then can be @ 3:05 can be Rolled. What is going on here. Can anyone explain the sort of steel that is seen here...???????
![[TH] 2024 PMGC League | กลุ่มสีเหลืองวันที่ 1 | PUBG MOBILE Global Championship](http://i.ytimg.com/vi/I_FdxGT3WV4/mqdefault.jpg)
Hey My All Dear Friends Subscribe To My Second Channel
(Random Factory)
th-cam.com/users/RandomFactoryUp
My location p
Фф
youtube.com/@ilyaskhan6851
عمل جيد 👍🏻👍🏻👍🏻
ولكن ماهذا الشيء فيما يُستخدم
You are the back bone for the country! Great respect!
youtube.com/@ilyaskhan6851
That's the kind of process and industrial work the United States needs.
That is the kind we had in the 40s and 50s...
@@Ards.Mercantile People back them wanted to succeed at whatever means, but now with regulations, worker's rights, and environmentalists, well it has gone to the drain.
People were tough, determined, and self independent. Nowadays, they blame others for their failures, expect the government's assistance by taxing the rich, and they always are looking on news ways to mess up things, my friend
i applaud your skills. love the way you guys work at your craft
youtube.com/@ilyaskhan6851
I'm glad I got my disc's from Indiana,USA! But I do respect hard workers every where, both with their hands and or their brains
Much respect for these workers. They did not ask for this but they are out here trying to survive
youtube.com/@ilyaskhan6851
Молодцы! Ручная работа! Спасибо за ролик!
А чё это такое?
youtube.com/@ilyaskhan6851
Что это?
At last... saw a man with protective socks!!
Good for putting the makers details into the video title. They will appreciate it. A good re-use of old railway steel. Saves meting it all down again.
youtube.com/@ilyaskhan6851
Vah mere viro kya mehnat te kualti saluut a
Sheeeeeeeeet......I had to go and put some shoes 👞 on....just to watch the video! Sheeeeeeeeet!!!
Grande profissional muito bom excelente parabéns pelo vídeo que Deus abençoe sempre seu trabalho muito bom excelente 👏👏👏👏👏
youtube.com/@ilyaskhan6851
amazing working in a fabrication with out any safety precaution and even use sleepers ...
6:30 Even the most basic of necessary safety is NEVER wear upper long-sleeve clothing while using a lathe, or at least roll your sleeves up above your elbows while using a lathe
I was more than a bit worried about the exposed drive belts everywhere as well. A set of simple guards they could have fabricated themselves would save a life.
@@brianthesnail3815
Youre absolutely right
My favorite is all the open toed shoes
This is the first video of this kind where one of the workers has had some proper footwear (boots).
It's too hot in there for boots flip flops is a good substitute they've been there forever don't care...
بأدوات بسيطة يصنعون من لا شيء كل شيء تحية حارة لكم أيها الرجال الفولاذيين 👍🏻🔥
Marvellous they take a used part and turn into a useful farming tool
This nation will go far
youtube.com/@ilyaskhan6851
another great video brother from the imperial co California.
Thanks for watching
trabajo perfecto......muy bien.....saludos y bendiciones para todos
youtube.com/@ilyaskhan6851
Очень красиво работаете,Супер!!
Thanks for watching
Интересно её потом не закаляют? Хотя-бы по краям.
Я так понял это борона
youtube.com/@ilyaskhan6851
You could easily implement a gyratory jig for the purpose of holding the disk while its being sanded. Sort or let the disk free spin while you position the angle grinder comfortably.
Just a peg would do really.
youtube.com/@ilyaskhan6851
Great bro
Nice to do work talented worker
- Мустафа, у тебя стружка идёт красная?
- Фигня! Зато резец синий!
Это спец отпуск кромки)))))
Nice technology 👍
If I looked at the part first, I would have assumed it was flattened first, then bent into shape with the pieces cut out, all in one go. Aside from that little bit of machining on the lathe, that's what I would have thought happened. The part was moving around a lot. I can only assume it was to allow various cooldowns/reheats between setups to give it more strength maybe?
Enjoyed your video and I gave it a Thumbs Up for you
Thanks for watching
@@RandomThingsUp You're welcome!!
Thank you for this informative and educational video!
thanks for watching dear
youtube.com/@ilyaskhan6851
Good materail
iyi kalpli işciler ve harika işleri.
I love PAKISTAN. PAKISTAN ŹINDABAD.🌷🌷🌷🌷🌷
Good..👍👍👍
It's filmed in Bradford, UK ?
This is a gold star comment
I hope that, as a nation, they will earn money quickly and improve living and working standards. It is a very hardworking nation and I think they will succeed. At the same time as the West will fall into disrepair, focusing on form rather than content.
00:40 Great stuff.
А теперь я бы посмотрел как они превращают эти диски обратно в рельсы!!!
youtube.com/@ilyaskhan6851
Luar biasa
With all this metal work , do you guys make all the parts to make the industrial tools ?
No hard hat no safety goggles no steel towed boots.I love our country
I've watched a lot of these videos of how things are made in other countries and this is the first one where one of the employees is wearing boots. Wonder what kind of Money they make. I've had a lot of shit jobs when I was young so I can feel for these guys.
I'm from Japan. I always enjoy looking at it. What is this product?
DISC HARROW
It zid Amazing......... SOMWAR.......12//12/)2022.......
MASHAALLAHA
Pakistani number one
From where they got these tracks? The tracks look perfectly fine. Corruption and corruption only
Worlds most extreme pizza oven 🤣🤣🤣
Ii guess you can make anything from railroad rails
As someone who got tinnitus from angle grinders, i fear for these young men
they are protected from God almighty
@@abdoulovic lmfao 🤣🤣🤣
As someone who has worked in manufacturing, machining, and carpentry I fear for their eyes and toes. I don’t see but one man wearing anything but sandals.
Don't fear My friend. Just pray.
@@abdoulovic 😂😂😂kuch bhi
Belle scarpe anti-infortunio
John Deere and Case International needs to visit this factory for their rich farmers
Wow a guy had safety shoes, I am impressed. The guy with a loose t-shirt next to a belt drive, hmmmm
iyi iş👍👋🇹🇷
Finally a video with someone wearing boots
How do you work on the ground, in the dust, with open sandals and without the slightest protection? It sounds like a primitive society that should still be living in caves, even if provided with a hammer, dilapidated oven and other few essential tools!
Wonder what the life expectancy is for these guys.
Not much. But these men stand in front of the impossible and make something of it. Everyone dies at the end. What matters is how you lived in the situation you were born into
I am surprised that this is even happening in my country. I grew up in the US from 8yrs of age.
youtube.com/@ilyaskhan6851
That old train rail seems very brittle
Old small railway tracks rails..these rails abondened in pakistan now
19th century technologys.
C'mon man, don't be a toxic shit. Whats your problem?
Is... Is that wood fired powder coating?
позвольте, разве рельса должна так ломаться под ударом кувалды?
How i can bay those disks from that compani?
СУРОВЫЕ ЧЕЛЯБИННСКИЕ МУЖИКИ - УВАЖУХА!
this is train rail,right?
Varume vanodya simbi inopisa!!
You have to love all the open toed shoes :) There are like 1 million safety issues with these videos. I bet most of them wind up with lung problems unfortunately. I am no way a safety karen but man, they don't even have the basics....really sad.
No heat treatment or temper on the steel, makes those worthless for agricultural purposes.
Hopefully there's a trade in deal, cause the first rock you hit with that is gonna do some damage.
I like the not existing safety gloves they are wearing.
So this is where all the stolen railroad tracks end up. 😆😆😆😆😆😂😂😂
Bhaiya hamare per bhi Ave kam Ave bula lo
po ile sprzedajecie te tależe do tależówki ?
Pakistanis have removed rail tracks and sold them for profit, result is ever decreasing length of railway tracks.😂🤣
Фрезы для дискования почвы !
👏
cool to watch but the complete lack of any safety gear or personal protective equipment is awful, your employer should provide safe working conditions for you so as to prolong your life and improve productivity
I agree! They don't even have the bare minimum. How about a few guards on those belts, some shoes, respirators?>
2:00
So much for OSHA safety guidelines, this guy is wearing sandals.
How many feet injuries are there ?
برای چی استفاده میشه کاراییش چیه
I cant imagine living in a country to where ya wore your pajamas to work. Their safety record must be inhumane. No wonder a 30 year old looks 80 over there.
Can't imagine living in a country where kids take bulletproof backpacks to school.
Not rather the oppsite? An 80 yr old looking 30
I can't imagine coming from such an uneducated country as yours where you think they are wearing pajamas
At least they still got equipment to press/cut the metal….
My office, all use hand….
Я не могу представить как одна страна уничтожает менее сильные страны ради ресурсов. Ливия, Ирак, Афганистан, Вьетнам и так далее
👍👍
How hot do they heat the steel before it is rolled?
+ -
Back pain is common
1st guy has something like steeltoe boots, 2nd guy has gloves, WHAT THE FUCK AM I WATCHING
MashaAllah
" chaud devant, pizza....."
es rica la picsa bien elaborada
How crazy it is that it's not for them more economical to buy the sheet metal from a steel mill, instead they employ lots of people and have to run demanding machines to flatten a railroad rail.
That footwear looks dodgy .. . but from what I could see, u all still have your ten toes.
They are wearing safety Sandles.
@@GerardHammond from where I come from, we call them Japanese riding boots. .
@@GerardHammond lol safety sandals. I wish I had thought of that!
Aap ka nmbr mil sakta hai?
1949?
I'm all for hard working people but man wear some steel toe boots.
ماشاء الله
Now, @ 1:30 the steel is brittle enough, ( high Carbon Content..?) but then can be @ 3:05 can be Rolled. What is going on here. Can anyone explain the sort of steel that is seen here...???????
And all with savety boots
Does no one in this workshop ever pick up litter or sweep up garbage?
One more thing no ear plugs
No gloves, Jesus sandals, and pajamas. What could go wrong?
PLEASE USE PROTECTED WORK CLOTHES, ESP GLOVES, SHOES, EYE GLASSES, RESPECT MORROCO
Just think how much John Deere will mark them up when they ship them to the US….
DISC HARROW