old content, but just picked up the pack to make a new wallet for my wife! My first project was a long wallet for her and it's time to upgrade after the last 3 years of small crafts! Thanks for keeping the pattern packs alive!
I picked up your pattern for the last womens wallet you made with the zipper pocket and it turned out great!!! I've only been leathercrafting for about a year now, and i have to say thank you for making these videos. It really helps us noobies. Helps give some guidance, and its much appreciated!
Made one of these with the zip pouch for the Mrs. She loves it and has gotten compliments on it out and about. She sometimes just carries it as a clutch too. 👍🏽 Love it!
Those video is from a while ago but I totally feel that this is actually easier than the bifold. I made the 9 pocket bi for my brother. Then his wife had a wallet and asked if I could make her a longer one. Thanks for the content and support.
You are good people and great teachers. I was trying to decide on remaking a 25 yoa long wallet I had purchased. But it used cardboard liners for CC slot slits . Will purchase your pattern and learn more about wallet making. Thank you
I will make this wallet without a pattern. It is enough for me to look at it and I will make it according to the size of the currency of my country. Thank you for the video
¡Excelentes patrones! 🤗 Ya los tengo, compré el PDF de la Billetera larga Universal y se puede jugar con los diferentes modelos que se pueden crear! Me encanta cada modelo que podré hacer con estos patrones! Gracias Corter por tan grandiosa idea! 💡 Manos a la obra! Saludos desde Lima - Perú 🇵🇪
Thanks a lot for this. I notice in the final shots some puckering at the fold line on the inside. I've had that problem too in the past, when I've lined the inside of wallets. Any advice for preventing that? Your glue up seems super thorough, and like it covers the entire area very well. So is it a case of getting the two sheets to fold only very progressively? Thanks.
We just used pretty thick lining leather - you'd want to go thinner, possibly use a french skiver on that 2" center. You can also glue it while it's slightly folded to clue in that bend as well, but as it is that puckering should wear in and go away over time :)
The solution is to glue it on a curve. Remember, if the lining is glued flat but then the pieces are bent, the inside piece will create a smaller radius curve from bending then the outer because it is traveling a slightly smaller distance (tighter curve). But since it's glued, it can't create that smaller radius curve (it's stuck to the outside), so it just puckers. Glue on a rounded 45 degree and you probably wouldn't have this issue. A cheap solution, when glueing, make contact with a 1/3 of the item flat, then the second third while wrapping around a rolling pin or can of Pam, etc. Then the final third flat again. Cut excess off inner piece.
When you stitch up that center line... how did you get your prickling iron to punch the holes evenly. Like it didn’t fall in a weird position on the pockets.
Take a trip to home depot`s tool section and find an oscillating spindle sander. This should be a cheaper option than the ower slicker with the drum sander. I use one and it works great.
Great tips, good looking wallet. Will have a go at skiving practice and I think it is time I replace some clunky Tandy tools as well (edger beveled for eg). Subscribed👍🏻
I was hoping to see how you come up with the measurements, like taking the size of bills and cards adding ease and seam allowances. So one step before this. Nice video even though it wasn't what I was hoping.
is anyone here got tips to avoid the wrinkles at the fold? should i put reinforcement paper on the other side or maybe i should glue the outer shell while folded? thank you..
@@Corter Thanks. I've always enjoyed your videos and I'm getting ready to begin working with leather... I work with fabrics and always use leather for the bottoms of tote bags and wantin' to expand.
Great job, you explanations are crystal clear. However, if it is possible I would enjoy that you offer an edit with just the making and no narration, the old way sort of. Don't get me wrong, I really like your tips and tricks, but it is a little long sometimes and it's nice to just see a work well executed without anything else in the way. Have a good day if you happen to see that comment.
I know you previously mentioned that you don't reallw use sewing machines. Have you ever thought of trying it to improve production speed? cool video BTW I really like the videos where you speak and go through the project.
If we do contract work that's machine sewn we outsource to a factory, I've got no interest in machine sewing because I love hand sewing :) We have streamlined our process for most of our stock items with cutting dies that we can spend the time hand sewing to keep the cost down
I am a little confused which is pretty normal, what is the Measurement of the outer shell?not good with math. A downloaded your pattern and I'm just trying to figure that out. With metric I have 20 mm Please help.
I bought some veg tan bellies from weaver, but the inner side looks really rough for any project. Just wondering how do you deal with this kind of problem.
old content, but just picked up the pack to make a new wallet for my wife! My first project was a long wallet for her and it's time to upgrade after the last 3 years of small crafts! Thanks for keeping the pattern packs alive!
I picked up your pattern for the last womens wallet you made with the zipper pocket and it turned out great!!!
I've only been leathercrafting for about a year now, and i have to say thank you for making these videos. It really helps us noobies. Helps give some guidance, and its much appreciated!
I second that!!!
Facts
How gorgeous! Be ethereal in light pink!
Made one of these with the zip pouch for the Mrs. She loves it and has gotten compliments on it out and about. She sometimes just carries it as a clutch too. 👍🏽 Love it!
Just downloaded and can’t wait to make different versions of this long wallet. Thank you for all you do.
Love the new format with you chatting through the video, giving tips etc. Great work. 👍👍
Huge PLUS to the videos! Excellent teaching stye. I'm really enjoying these new videos and never miss them.
awesome cant wait to start pass these out as gifts
Thank you so much for the detailed explanation - so helpful!!
Those video is from a while ago but I totally feel that this is actually easier than the bifold. I made the 9 pocket bi for my brother. Then his wife had a wallet and asked if I could make her a longer one. Thanks for the content and support.
Nice looking wallet! enjoy the narrated videos, I always learn something that I can use towards my own projects, so thank you!
You are good people and great teachers. I was trying to decide on remaking a 25 yoa long wallet I had purchased. But it used cardboard liners for CC slot slits . Will purchase your pattern and learn more about wallet making. Thank you
Another Great Video By Corter Leather. I am always excited about watching the next new video.
Muy bueno sus trabajos.. Es usted un maestro.. SALUDOS desde Bolivia..
You make this look so easy
Fenomenal piece. Keep doing marvelous pieces and video for us. I love it
going to try this. thanks for sharing.
Wonderful work, very clever idea. 12 patterns on one.... Wow that's amazing. Well done. Greetings from Brazil 🇧🇷... :-)
Fabulously informative!
Great video! Thank you for the content.
I will make this wallet without a pattern. It is enough for me to look at it and I will make it according to the size of the currency of my country. Thank you for the video
I could do the same but i bought a pattern to support his channel, i like his videos.
I love this pattern. Made so many wallets with this. Still need to do a lining yet. Tried once but wasn’t very good
¡Excelentes patrones! 🤗 Ya los tengo, compré el PDF de la Billetera larga Universal y se puede jugar con los diferentes modelos que se pueden crear! Me encanta cada modelo que podré hacer con estos patrones! Gracias Corter por tan grandiosa idea! 💡 Manos a la obra!
Saludos desde Lima - Perú 🇵🇪
Thanks a lot, your video is great as always
Thnak you for your free pattern and a lot of tips ^^
Awesome lesson on skiving. TY
Really nice pattern
Thanks a lot for this. I notice in the final shots some puckering at the fold line on the inside. I've had that problem too in the past, when I've lined the inside of wallets. Any advice for preventing that? Your glue up seems super thorough, and like it covers the entire area very well. So is it a case of getting the two sheets to fold only very progressively? Thanks.
We just used pretty thick lining leather - you'd want to go thinner, possibly use a french skiver on that 2" center. You can also glue it while it's slightly folded to clue in that bend as well, but as it is that puckering should wear in and go away over time :)
@@Corter Thanks. That's very useful.
The solution is to glue it on a curve. Remember, if the lining is glued flat but then the pieces are bent, the inside piece will create a smaller radius curve from bending then the outer because it is traveling a slightly smaller distance (tighter curve). But since it's glued, it can't create that smaller radius curve (it's stuck to the outside), so it just puckers. Glue on a rounded 45 degree and you probably wouldn't have this issue.
A cheap solution, when glueing, make contact with a 1/3 of the item flat, then the second third while wrapping around a rolling pin or can of Pam, etc. Then the final third flat again. Cut excess off inner piece.
When you stitch up that center line... how did you get your prickling iron to punch the holes evenly. Like it didn’t fall in a weird position on the pockets.
Beautiful! Brazil 🇧🇷
Olá manu, tenho esse modelo pronto disponivel
Great Video!
Can you tell us how thick the leather you used was ?
Bought it 🖤
Great content😍 can you do a skiving tutorial of your best methods???
Beautiful pattern. TY. I want to make this as a double zip wallet. Twice as big with two sides exactly like these.
that'd be so much storage! Go for it!
Love the wallet, could not find the pattern in the link. Help!
What can I do to combat those wrinkles? Or is it going to mostly depend on the leather?
Which is the optimal leather thickness ??
I’ve never found it in the material list.
Thanks
Nice wallet! What brand of contact cement do you use to stick the leather pieces together? Is it customized for leather? Thanks!
Take a trip to home depot`s tool section and find an oscillating spindle sander. This should be a cheaper option than the ower slicker with the drum sander. I use one and it works great.
where did you buy the pricking iron?
Great tips, good looking wallet. Will have a go at skiving practice and I think it is time I replace some clunky Tandy tools as well (edger beveled for eg). Subscribed👍🏻
I was hoping to see how you come up with the measurements, like taking the size of bills and cards adding ease and seam allowances. So one step before this. Nice video even though it wasn't what I was hoping.
I bought a pattern to support your channel.
I'm just buying an auto skiving machine😂😂😂😂
What stitch spacing do you use on your wallets?
Молодец! Больше видео!!!
Do you make anything with Sheep-nappa instead of veg-tan leather ?? I really look forward to ....
Translated to the Arabic If your videos allowed more than wonderful and I would love to benefit more greetings to you from Egypt🇾🇪
Uhuulll primeirão a dar joinha.
First one to give👍
Me gusto tu tutorial muy prolijo. Me gustaria poder realizarlo.
is anyone here got tips to avoid the wrinkles at the fold? should i put reinforcement paper on the other side or maybe i should glue the outer shell while folded? thank you..
What is the benefit of the convex pocket?
Haven't seen this before.
Just a design detail that works nice with the pocket shapes :)
@@Corter Thanks.
I've always enjoyed your videos and I'm getting ready to begin working with leather...
I work with fabrics and always use leather for the bottoms of tote bags and wantin' to expand.
How many xacto blades do you go through in a project like this one?
usually just 1 :)
18 minutes late 😕...but l'm ready now, let's do this Corter 😃
Ficou lindo!👍🏼😍, obrigada!!
Thanks a lot
Great job, you explanations are crystal clear.
However, if it is possible I would enjoy that you offer an edit with just the making and no narration, the old way sort of. Don't get me wrong, I really like your tips and tricks, but it is a little long sometimes and it's nice to just see a work well executed without anything else in the way.
Have a good day if you happen to see that comment.
Can you make a tutorial on edge paint?
I know you previously mentioned that you don't reallw use sewing machines. Have you ever thought of trying it to improve production speed?
cool video BTW I really like the videos where you speak and go through the project.
If we do contract work that's machine sewn we outsource to a factory, I've got no interest in machine sewing because I love hand sewing :) We have streamlined our process for most of our stock items with cutting dies that we can spend the time hand sewing to keep the cost down
@@Corter ok cool 👏👏. could you do a leather brecelet tutorial.
I am a little confused which is pretty normal, what is the Measurement of the outer shell?not good with math. A downloaded your pattern and I'm just trying to figure that out. With metric I have 20 mm Please help.
What is your stitch seam allowance?
Niiice nice!!!! When would you have the chance to make my one?
Очень и интересно смотреть
How many mm is your puncher you say again?
I bought some veg tan bellies from weaver, but the inner side looks really rough for any project. Just wondering how do you deal with this kind of problem.
I mean...simply don't buy bellies. Unfortunately they're cheap for a reason.
Здравствуйте. Скажите, пожалуйста, какая это кожа.
Как всегда супер! Что за кожа?
i got popup from antivirus saying suspicious activity when i went to pattern link
Mine buckles in the middle
a
Do Americans use a lot of cheques still?
some do!
Can’t watch your channel anymore with voice((( it was better before☹️