one other idea, would be to chop the top of the box so that it's not so deep. That will lessen the corner visibility. That would then pose an issue with how it's mounted at the bottom, but I imagine some sort of sturdy spacer or 'box below the box' platform for it to still mount properly below the more shallow box. just ideas. more parts means more opportunity for failure of course. looking forward to seeing this beauty get buttoned up for the show. great work so far man!
@@MagassDesign looking at again, I guess the box HAS to be that deep because of the airlift module's height. looking good in the new video with the LED
@@brixvibe That was the biggest challenge, to fit the height of the Manifold. I even had to mill away material on the underside of the beuty panel to make it fit. 🤣
You could just make a slot, the width of the cable, from the top of the box to around the middle so you don't have to make a hole big enough for the connector. I hope you understand what i mean :)
I do understand and I have already welded away the big hole and made a slot from the top side. But I like how we think ha ha. Thanks bro for even taking the time to write. Really appreciate it!
God jul och gott nytt på dig! Angående hatthyllan, vad ska den kläs i? kanske kan klä med samma ner i aluminiumlådan också? Läder med diamantmönster hade nog varit fett annars!
God fortsättning mannen! Ja jag kan inte avslöja vilket tyg det blir riktigt än. Men det kommer nog att ordna sig med allt tyg och lite andra idéer som jag har ha ha. Tack snälla att för att du tog dig tiden att skriver och att du tittar😍
the best option is to probably redo the beauty panel so that it only shows what you want. no sense in going this far in a build and having to compromise on a fixable thing. obviously your call. you'll still wow people with the custom rear deck regardless. If you don't want to redo it, maybe just put some foam in the corner making the angle 45 degrees,, following the contour of the hardline, or soften it up in other with foam. maybe do something similar that follows the hardline contours on the bottom side as well... then cover with fabric. That's probably what I'd do, so that I wouldn't have to redo the beauty panel. At least foam is cheap and pliable, so you can try out a lot of different looks easily
![Polish stainless steel and aluminum [ Infiniti G37 ]](http://i.ytimg.com/vi/DoRlmW268S4/mqdefault.jpg)
![Polish stainless steel and aluminum [ Infiniti G37 ]](/img/tr.png)
![CUSTOM CAR AUDIO [ Infiniti G37 ]](http://i.ytimg.com/vi/OSSRi5RSgVg/mqdefault.jpg)
![Custom Rear Deck [ Infiniti G37 ]](http://i.ytimg.com/vi/K9xBklK8D-g/mqdefault.jpg)
Marry Christmas and happy new year to you too!
I think black fabric in the box will do a good job of hiding the hole and the sharp edges
Huge thanks bro❤ I think and hope it will hide it well.
Looks good maybe put a mirror inside of it with some lights to give it a infinity mirror effect
Thanks man.. coming up in the next video 😁🥰
Looks good to me! Once you put some fabric in there I’m sure it’ll clean up nicely 👌🏼
Thanks bro! I do really hope so.
Really appreciate it!
I think you should polish some aluminum or add mirrors inside to reflect the aluminum lines and hide the empty box more
Thanks Erick for the feedback and I have some mods coming up in the next video.
Huge thanks for taking the time to write and thanks for watching 😍
Been waiting for your build to be done 😩
@@erickcontreras9322 It has to be done in April next year. First show off in 2023.
one other idea, would be to chop the top of the box so that it's not so deep. That will lessen the corner visibility. That would then pose an issue with how it's mounted at the bottom, but I imagine some sort of sturdy spacer or 'box below the box' platform for it to still mount properly below the more shallow box. just ideas. more parts means more opportunity for failure of course. looking forward to seeing this beauty get buttoned up for the show. great work so far man!
Thanks bro! You have a lot of good thoughts. I really appreciate you taking your time to write and all feedback! 🥰
@@MagassDesign looking at again, I guess the box HAS to be that deep because of the airlift module's height. looking good in the new video with the LED
@@brixvibe That was the biggest challenge, to fit the height of the Manifold. I even had to mill away material on the underside of the beuty panel to make it fit. 🤣
Hw is it going?. so excellent vlog.see u around! 🤘
All good here. Hope the some to you!
Thanks for watching!
You could just make a slot, the width of the cable, from the top of the box to around the middle so you don't have to make a hole big enough for the connector. I hope you understand what i mean :)
I do understand and I have already welded away the big hole and made a slot from the top side.
But I like how we think ha ha.
Thanks bro for even taking the time to write. Really appreciate it!
@@MagassDesign great minds think alike!
No problem bro, keep up the great work!
@@jelle8754 I will and thanks for the support🥳💯
God jul och gott nytt på dig!
Angående hatthyllan, vad ska den kläs i? kanske kan klä med samma ner i aluminiumlådan också? Läder med diamantmönster hade nog varit fett annars!
God fortsättning mannen! Ja jag kan inte avslöja vilket tyg det blir riktigt än. Men det kommer nog att ordna sig med allt tyg och lite andra idéer som jag har ha ha.
Tack snälla att för att du tog dig tiden att skriver och att du tittar😍
Kommer bli kungligt oavsett, du gör ju aldrig något halvdant!
Alternativt kan man ju Lacka alu-n typ mattsvart så blir inte linjerna så tydliga 😃
@@dallehn1337 Tack snälla man.. Ja jag försöker mitt bästa. Den idén skall sparas 😁
the best option is to probably redo the beauty panel so that it only shows what you want. no sense in going this far in a build and having to compromise on a fixable thing. obviously your call. you'll still wow people with the custom rear deck regardless.
If you don't want to redo it, maybe just put some foam in the corner making the angle 45 degrees,, following the contour of the hardline, or soften it up in other with foam. maybe do something similar that follows the hardline contours on the bottom side as well... then cover with fabric. That's probably what I'd do, so that I wouldn't have to redo the beauty panel. At least foam is cheap and pliable, so you can try out a lot of different looks easily
Thats a really good idea! Thanks man! I will take that with me.
What happened to the G37 I was following the q60 conversion
Hi there.. Takes a long time building this show car🤣but the hole car Must be ready by Easter at the latest 🥳
What country are you from? Weird, the weather just tried to get me, a few days my voice was going 🧐
Ooo where u from? I'm from sweden.
@@MagassDesign united states, we had the cold blast, somebody is playing with the weather planet bro! Hope you get well love the build 🙌
@@marathonlogistics9943 I saw that on the news, totally crazy! Thanks again for watching and new exciting stuff is coming up 🥰
Ska lådan lackas eller kläs in?
Den kommer att kläs med samma typ som resten av inredning 😇