Running power to my SIGNAL BOX

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ก.พ. 2025

ความคิดเห็น •

  • @Pkilznah
    @Pkilznah 2 วันที่ผ่านมา +3

    Changed your icon threw me off. Glad I caught. Love your layout RESPECT 🚂🔥🎯

    • @summitrailway
      @summitrailway  2 วันที่ผ่านมา

      I replaced it a few months ago, glad you recognized me again.

  • @reneschneiderAustralia
    @reneschneiderAustralia 3 วันที่ผ่านมา +1

    Impressive work done, rather you than me. It is scorching hot again, ice tea and a fan :)

    • @summitrailway
      @summitrailway  2 วันที่ผ่านมา

      We are below zero right now but no clouds and a nice sunny sunday :)

  • @AlfredBelpaire1820
    @AlfredBelpaire1820 3 วันที่ผ่านมา +3

    One red, one black and power in the rack!

    • @summitrailway
      @summitrailway  2 วันที่ผ่านมา +2

      And it works, finally no external power supply with extension chords. I am so happy!

  • @thomasvalkyrie
    @thomasvalkyrie 3 วันที่ผ่านมา +5

    Durch den Übergang bei 9:50 wird Wasser in das Rohr kommen. Die Leitung H07V-K wird dir damit auf Zeit defekt gehen. Wieviel Ampere liefert das Netzteil, evtl. solltest Du auch über Sicherungen nachdenken.

    • @summitrailway
      @summitrailway  2 วันที่ผ่านมา

      Den Übergang werde ich überarbeiten, mit deinem Einwand hast du völlig recht! Das Netzteil liefert 20A und ist ordentlich abgesichert. Ich werde aber im Schaltschrank selbst noch Sicherungen anbringen welche unterschiedliche Verbraucher absichern. Zum Beispiel die Bahnsteigbeleuchtung. Vielen Dank für deine guten Einwände, ich arbeite daran :)

  • @keithturner4036
    @keithturner4036 3 วันที่ผ่านมา +2

    Ideally cables should be run in conduit close to the ground and not at the top of the fence in case the fence gets damaged in a storm etc

    • @summitrailway
      @summitrailway  2 วันที่ผ่านมา +1

      I would have run them under ground but we are going to replace the fence and restore the building next to it in a few years from now. This installation was a compromise between long term and temporary installation. It will hold up until we are restoring the building.

  • @jovetj
    @jovetj 3 วันที่ผ่านมา +4

    How did you track or mark which pair is DC and which pair is DCC?

    • @LordPhobos6502
      @LordPhobos6502 3 วันที่ผ่านมา +2

      Came here to ask the same question

    • @summitrailway
      @summitrailway  2 วันที่ผ่านมา

      I run the cables first, then stripped one black and one red wire, connected the ends on one side and used a multimeter to mesured for continuity on the other end. That´s how I determined which wire goes where.

  • @michaelgartenbahn
    @michaelgartenbahn 3 วันที่ผ่านมา +4

    Saubere Arbeit was machst du den beruflich: Elektriker?

    • @summitrailway
      @summitrailway  2 วันที่ผ่านมา +1

      Nein ich bin kein Elektriker, aber ich habe es satt mich mit lumpigen Kabeln und schlechten Installationen auseinander zu setzen wo es ständing Probleme gibt. Deshalb mache ich es bei der Gartenbahn beim ersten mal Ordentlich und habe hoffentlich lange meine Ruhe und keine technischen Probleme. Das braucht natürlich viel Zeit und kostet auch bedeutend mehr aber das ist es mir Wert!

    • @michaelgartenbahn
      @michaelgartenbahn 2 วันที่ผ่านมา

      @summitrailway finde ich gut dass du es von vornherein alles sehr sauber verlegst kann man sich ein Beispiel dran nehmen. 👍

  • @robinsagar5898
    @robinsagar5898 2 วันที่ผ่านมา +1

    The next job must be to paint the fence 🙂

    • @summitrailway
      @summitrailway  2 วันที่ผ่านมา

      The fence is going to be replaced in a few years along with the restoration of the building next to it. This is the reason for this strange way of installation in the first place...

    • @robinsagar5898
      @robinsagar5898 2 วันที่ผ่านมา

      @@summitrailway I was only joking. You shouls see my fence!!!
      By the way have you a snow plough? I know there isno snow now but late Febuary early march there could be.