WHY DOES MY ATV BOG DOWN WHEN I GIVE GAS TO ACCELERATE
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- MY CHINESE ATV DOES NOT START AND BOGS DOWN WHEN I GIVE GAS
RIDE FOR LESS!
WWW.SCOOTERATVSALES.COM
(Call Before Ordering to Confirm Availability)
CALL 775-856-3398
LOW-COST OPTION ATV DEALERSHIP SCOOTER CITY RENO SCOOTERATVSALES.COM
NORTHERN NEVADA:
VISIT: SCOOTER CITY RENO ATV
920 MATLEY LANE STE-6
CALL 775-856-3398
www.scootercity...
ORDER NOW!
Get Universal Chinese Parts
www.scooteratvp...
Instagram Link
/ scooteratvs. .
Shop for Parts:
www.scooteratvp...
Very helpful! These suggestions help us find the problem on my kids quad
Thank you
You completely overlooked the needle and the needle jet. That is the part of the acceleration from 1/4 to 3/4 quarters throttle. If the needle clip is in the wrong position, upon acceleration beyond 1/4 throttle, you can flood out the engine, and it will bog out until you go beyond into the three-quarter to full throttle range. The needle has five positions. The top position is lean, the bottom position is a Rich fuel mixture. Bogging out on acceleration is typically when you have the needle clip set to a more rich fuel mixture. These Chinese motorcycles are typically shipped out without ever having had the needle clip adjusted to the correct air/fuel mixture position
Awesome advice, thank you
Is this the needle inside the carburetor that the throttle cord attaches to in the spring?
Excellent video! Thank you!
Nice intresting video! But my ATV stalls when I throttle it in forward/backward position, starts and revs fine in neutral. Any idea?
Fundamentals are first, air/fuel, then electrical (CDI box)
What do you mean air/fuel?
Thanks for the video. Ours is weak going forward. But seems powerful in reverse.
What if my ATV doesn’t have choke, or air/fuel screws? It’s an X-PRO 200cc utility quad.
They all have a choke. Most newer China ATVs Carbs have the air/fuel mixture capped. Most of the caps can be removed with a dremel tool
Hey boys I enjoyed the video. Very good pace and thorough.
My sons Tao Tao 110cc Boulder wouldn’t start. I replaced the spark plug and installed a New carburetor. It fired up right away and never sounded better. When I switch it into drive it goes very slow and eventually dies out. It does the same thing in reverse. What in the world is going on? I am baffled ..
You installed a new carb and fuel filter. Hard to tell.
Thanks! You guys are the best !
Appreciate the feed back
My TaoTao ATV bogs down when I give it gas quickly only. When I move it slowly it’s fine. Any ideas?
Check Spark plug, throttle or it may need to be cleaned
Mine turns over without the brake clamped/depressed-- my wiring harness and kill switch have no provision for the little blade connectors under the brake lever-- is that why it won't start? This has a been a nightmare of mismatched parts, badly made, no manual, etc.
Hard to tell without knowing the history of the ATV
solid tips thank you
Appreciate the feedback
i have a baja 250u motorsport atv cleaned the carb replaced the plug gaps correct still bogs down and back fires any help i would appreciate
Spark plug and C-Clip on metering rod, last check valves
@@MOTORSUncut great if i new where to find the c clip
Good job! 👍
Thank you
Super Cool video ❤❤❤❤❤
Appreciate the feedback.
The owners Manuel could of sent for some else.
The owners manual does not include diagnostic info