How to change your Honda Accord front pump seal

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ม.ค. 2025

ความคิดเห็น •

  • @CodytheCarGuy
    @CodytheCarGuy  7 ปีที่แล้ว

    www.codythecarguy.com
    www.codythecarguy.com/store
    www.codythecarguy.com/forum

  • @DanVillarreal1988
    @DanVillarreal1988 ปีที่แล้ว

    Do you need to put any kind of adhesive to hold the seal in like in some chevy transmissions?

  • @joeylietjauw1742
    @joeylietjauw1742 3 ปีที่แล้ว +1

    Question: if this O-ring is worn out does it leak fluid out the transmission without starting? Cause I addes fluid and it started leaking like crazy man.

    • @juancastaneda9515
      @juancastaneda9515 2 ปีที่แล้ว

      If you’re talking about the oring on the torque converter, no it should not leak, I actually accidentally installed my transmission without the oring on the converter the only issue you’ll have is that you’ll get a code for the torque converter because it doesn’t allow it to seal the pressure in the converter with no oring, I removed the Tranny today and saw it has no oring on the converter so I’m trying to find who sells it

  • @rodriquezowens5189
    @rodriquezowens5189 9 ปีที่แล้ว +1

    Do the o-ring give pressure to the transmission pump and will it shift good

    • @CodytheCarGuy
      @CodytheCarGuy  9 ปีที่แล้ว

      Rodriquez Owens Yes because it keeps the fluid going to the right spot but if your having shift issues make sure you don't have a flashing d4 or low on fluid and you can also try some lucas transmission additive that stuff really works wonders

    • @rodriquezowens5189
      @rodriquezowens5189 9 ปีที่แล้ว

      Ok. Thaks a lot

  • @antonioowens4084
    @antonioowens4084 9 ปีที่แล้ว

    i got a 2002 Honda accord 2.3 engine. I got my transmission rebuild and the men that rebuild it did not put no o-ring in it. the person that is putting it in. he said that he had to mass the gas pedal to the floor in it move. it that the torque converter o-ring

  • @rodriquezowens5189
    @rodriquezowens5189 9 ปีที่แล้ว +1

    What does the o-ring do

    • @CodytheCarGuy
      @CodytheCarGuy  9 ปีที่แล้ว +1

      Rodriquez Owens It seals the fluid to flow in the right away ea hole flows in to different spots

    • @rodriquezowens5189
      @rodriquezowens5189 9 ปีที่แล้ว

      Ok. Thanks

  • @rodriquezowens5189
    @rodriquezowens5189 9 ปีที่แล้ว

    When i put the o-ring around the torque converter. Will the car move ?

    • @CodytheCarGuy
      @CodytheCarGuy  9 ปีที่แล้ว

      Rodriquez Owens there are a couple seals up there one a oring on torque converter and one is a pump seal , is your car leaking fluid ? if its out of fluid because of leaking seals then yes once you top off fluid but if something else is wrong then no

    • @rodriquezowens5189
      @rodriquezowens5189 9 ปีที่แล้ว

      Ok. Thanks

  • @angellmorales4799
    @angellmorales4799 4 ปีที่แล้ว

    What is the actual name of the seal. I looked up front pump seal and got something totally different

    • @JoshuaPanola
      @JoshuaPanola 3 ปีที่แล้ว

      torque converter o ring?

    • @JoshuaPanola
      @JoshuaPanola 3 ปีที่แล้ว

      my bad I was looking at the thumbnail, maybe input shaft seal?

  • @Xiamen72
    @Xiamen72 7 ปีที่แล้ว

    Thanks

    • @michaelwilks4975
      @michaelwilks4975 5 ปีที่แล้ว

      Honda transmission front seal keep leaking