That was an incredible creation. I appreciate your great technical talent. The movement of the gun barrel of the artillery tank was incredible. Have a good day friend. ♥️🕊️🌍🦕
For sure lots of cutting and paste Enormous project very rewarding you can't find the files here : cults3d.com/en/3d-model/various/jagdpanzer-38-t-hetzer-scale-1-6-3d-printable-rc-tank-model good luck have fun!
Have you had it off road and if so how would you rate the power of the drive motor? Looks like geared 550 brushed motors, but it looks like there would be enough room in there for larger ones like geared 775s. I'm going to build it, but I'm concerned it may not have enough power.
The drive motor are okey more power will be a good upgrade the tank is light to compare to my other tanks that give him an advantage but the motors are humming after running a while if you plan to go off road a lots I recommend bigger motors more power is always better and to know if you have enough room for bigger motor build it before you buy the motor and with the side plate and the motor measurement you will figure it out if it fit because for me now to have a proper measurement I will have to remove a lots of components that I'm not ready to do. Hope this help you and good luck building it it is a very well done tank have fun!😊
to build it I say about 8hrs a day take me about 3 weeks to a month of printing maybe more, hard to say exactly I build it 2 years ago and I build other vehicles in the same time when I print one vehicles I already building another one on the Bench hard to have a precise number! Hope this will help you very rewarding project!😊
@@LorenzoJalbert i see, I recently ordered a sovol sv08 online to print the large pieces of the hetzer, but I'll use my bambu for tracks and smaller stuff, thank you for your enthusiasm
@L_ennyman Lucky you I hear all king of good thing about this printer( SV08 Sovol )let me know how it goes maybe I will get one too! Thank you so much for watching my video! great talking to you!😊
Are you designing these files yourself, or do you find them somewhere? if the latter, could you tell me where because I would love to make this. (I'm almost done making that Leclerc Tractor :D)
Actually the Sturmgeshutz 3 is credited for the most tanks killed by the German Army in WW2 i believe also a very reliable and well sorted chassis quite a number of them were produced and it proved to be very capable as well with the same 7.5 cm Pak 40 gun
3d is the future, this way most people will afford models they could only dream about
Good job 👍
True, thank you for watching my video!😊👍
Wow this tank is so Awesome!
You did a Great Job on building it!
Thank you for sharing!
Thanks Michael! 😊
Complex but really interesting work, great result 👍
Glad you like it thanks Pascal!!
@@LorenzoJalbert 😉👍
It's just that what you build is amazing and the end result is spectacular. Great job my friend. At your command.
huge thank you my friend! 👍🙂
Great build.
Thank you!
you make it look so easy. i also saw your German one axle, drums trailer video, so very well done Lorenzo! 👍👍
Double huge Thank you Eli!
That was an incredible creation. I appreciate your great technical talent. The movement of the gun barrel of the artillery tank was incredible.
Have a good day friend. ♥️🕊️🌍🦕
Thank you Dino!😊👍
@@LorenzoJalbert Most welcome friend ♥️🦕
Amazing work Lorenzo, love it my friend, :)
Thank you Tom!
You my friend have done it again, Brilliant simply brilliant.
Thank you Andrew!🙂👍
Very nice !!!
Thank you so much!
Awesome work, buddy 😊👍
Thank you so much Buddy!
Are that the files from Warprintz? Bought the same and will start to print the 1/6 Hetzer this winter. thx for sharing.
Yes they are the same files good luck very nice project, good information and detail have fun. 😊 Thanks for watching
Espectacular trabajo. Saludos.
Gracias mi amigo🙂👍
Fun to the next level!!
3D printers are magic ✨
Thank you so much!
Im planning on making this. My favourite turtle
This is a very rewarding project! 😊
Fantastique mon Lorenzo....
Un gros Merci Ray!
Cool! What printer were you using and how long did this take? it looks like a monumental project
Hi, I use and Ender 3 pro Printer and I have to slicer some parts. He took me around 3 months to prints, assemble and paint everything nice project 😊
Great Work !!! where do you find the stl files ? I have a printer with the same bed as yours, but probably you need a lot of cutting and paste ?
For sure lots of cutting and paste Enormous project very rewarding you can't find the files here : cults3d.com/en/3d-model/various/jagdpanzer-38-t-hetzer-scale-1-6-3d-printable-rc-tank-model good luck have fun!
Have you had it off road and if so how would you rate the power of the drive motor? Looks like geared 550 brushed motors, but it looks like there would be enough room in there for larger ones like geared 775s. I'm going to build it, but I'm concerned it may not have enough power.
The drive motor are okey more power will be a good upgrade the tank is light to compare to my other tanks that give him an advantage but the motors are humming after running a while if you plan to go off road a lots I recommend bigger motors more power is always better and to know if you have enough room for bigger motor build it before you buy the motor and with the side plate and the motor measurement you will figure it out if it fit because for me now to have a proper measurement I will have to remove a lots of components that I'm not ready to do.
Hope this help you and good luck building it it is a very well done tank have fun!😊
Hey!, nicely madee hetzer, i wanted to ask what electronics you used, and also its possible to print the warprints hetzer on a 256x256 plate aswell? 😊
Turnigy 9X 9Ch Mode 2 Transmitter w/ Module & iA8 Receiver (AFHDS 2A system)😊
@LorenzoJalbert ooo, I see!! I planned on using a flysky reciever with an esc, how long did It take you to build it?
to build it I say about 8hrs a day take me about 3 weeks to a month of printing maybe more, hard to say exactly I build it 2 years ago and I build other vehicles in the same time when I print one vehicles I already building another one on the Bench hard to have a precise number! Hope this will help you very rewarding project!😊
@@LorenzoJalbert i see, I recently ordered a sovol sv08 online to print the large pieces of the hetzer, but I'll use my bambu for tracks and smaller stuff, thank you for your enthusiasm
@L_ennyman Lucky you I hear all king of good thing about this printer( SV08 Sovol )let me know how it goes maybe I will get one too! Thank you so much for watching my video! great talking to you!😊
How many rolls of filament did you use?
I didn't count but about 5 or 6 I think🙂
Are you designing these files yourself, or do you find them somewhere? if the latter, could you tell me where because I would love to make this. (I'm almost done making that Leclerc Tractor :D)
cults3d.com/en/3d-model/various/jagdpanzer-38-t-hetzer-scale-1-6-3d-printable-rc-tank-model😊
how many hours of printing is the upper hull?
Two to three weeks depends how many hour a day!
@@LorenzoJalbert thank you! very nice looking final tank.
@@snedhepsquadron406 😊👍
Actually the Sturmgeshutz 3 is credited for the most tanks killed by the German Army in WW2 i believe also a very reliable and well sorted chassis quite a number of them were produced and it proved to be very capable as well with the same 7.5 cm Pak 40 gun
Thanks for the info and for watching my video!😊
ShoeBetcha !!! Hetzer is one of my faves too you should do a vid on the Kugel Hetzer Flakpanzer i just discovered it not to long ago 🙂
@@SuperErikRoss I will look in to it Thank you
@@LorenzoJalbert ShoeBetcha !!! 🙂