Mine didn't work well with the happymodel 300mah batteries. They are shit. With betafpv bt2.0 300mah it works just fine. That might be the issue with yours
@@fpvsmurf mine smoked as soon as I plugged it in and I went back through it and it was soldered correctly, that was the 3rd one I have had that happen to.I hear there’s been problems with that particular board.Now I check polarity with meter before I even start soldering
The cost was 220 euro with batteries. If you don't have experiance with buildings is better to get RTF with lower kv. This one is overkill with 30000kv and is to hard to fly because has a lot of power. I suggest meteor 65, 19000kv 23grams or if you want faster get the mobula 25000kv 20 grams.
Thats not nice, flight time one minute and speed? Uh 😅 motor kV more than 20k kV is not effiency, best combo 20k kV and two blade 40mm prop- speed, flight time and power
@@TomStell_11 that oscillation when its balancing in to position is over shooting then undershooting cuasing a pid loop over correction. basically you need to turn down your dampening and increase your i term on pitch axis.
@@Y0n3z I have not reflashed my board. It is in the original settings. Do you think that the oscillations will go away if I reflash with the new beta flight?
Very nice brother.
Thank you! Cheers!....
For analog that lookksss AWESOME DUDE!🤗🤗🤗🤯!!
Because it's analog, that's why it's awesome. Weighs less.
You are right the video is really good because of the betafpv CO3.
@@TomStell_11 lol ready to die on a hill over analog i see. 🤣🤣
Lucky you ,your diamond board works lol
Mine didn't work well with the happymodel 300mah batteries. They are shit. With betafpv bt2.0 300mah it works just fine. That might be the issue with yours
All my diamonds have worked too. Guess some of us are just lucky...
Yes it works for now although I broke the camera plug while putting it together but I hope that it will be fine.
@@fpvsmurf mine smoked as soon as I plugged it in and I went back through it and it was soldered correctly, that was the 3rd one I have had that happen to.I hear there’s been problems with that particular board.Now I check polarity with meter before I even start soldering
this FC gonna burn with this motors and props)
You are right there is a risk. The website I bought it from said that as well. I will keep you posted!
@@TomStell_11 I used 0802 27kkv with 5a board and burned at least one mosfet)
Ну да, это чересчур)
What do you susggest using if i need more battery life and safer
You can go up to 300mAh max. After that it gets much heavier also it's really intense so 2-2.5 min of flying is long enough!
holy sh*t that things fast
Yeah, it's really fast. I hope to keep alive the AIO
I approve ❤❤❤
Edit: does it work on betaflight?
Thanks! Yes, like most FCs it does work with betaflight.
HELL YEAH
dope
How much do you think was the total cost? Do you think building is better than just buying something already built ready to fly?
The cost was 220 euro with batteries. If you don't have experiance with buildings is better to get RTF with lower kv. This one is overkill with 30000kv and is to hard to fly because has a lot of power. I suggest meteor 65, 19000kv 23grams or if you want faster get the mobula 25000kv 20 grams.
Nice!,,
Thanks!
What is the transmitter
Radiomaster boxer 4 in one. Frsky spi d8 receiver.
Thats not nice, flight time one minute and speed? Uh 😅 motor kV more than 20k kV is not effiency, best combo 20k kV and two blade 40mm prop- speed, flight time and power
Yes indeed. It is a battery killer, but the one and a half minutes is so intense.
your gains are way to high, thing needs a tune badly...
Can you explain what you mean by gains?
@@TomStell_11 that oscillation when its balancing in to position is over shooting then undershooting cuasing a pid loop over correction. basically you need to turn down your dampening and increase your i term on pitch axis.
Ok I will try that. I also have some issues with oscillations while using the throttle. Is this going to help with that?
@@TomStell_11 have yu reflashed your board recently? was it on a older version of beta flight pre 4.1 ?
@@Y0n3z I have not reflashed my board. It is in the original settings. Do you think that the oscillations will go away if I reflash with the new beta flight?