RFID Based Smart Car Parking
ฝัง
- เผยแพร่เมื่อ 20 ก.พ. 2022
- This is Paid Car Parking using RFID, In this project whenever any car enters in the parking site, it scans the RFID tag and park at parking slot, after few minutes or hours when car come at exit it, it scan the RFID tag and amount will be deducted from the tag according to parking time
Components Used In The Project
1. Arduino Nano
2. EM18 RFID Reader
3. 16x2 I2C LCD
4. IR Sensor
5. Servo Motor
6. Buttons
7. Power Supply
******************************************************************
If You Want To Purchase The Project Or Code
Mail Us : man.suthar2012@gmail.com
Or
Message Us On FB Page : / clgproject2017
*******************************************************************
RFID Based Smart Car Parking, rfid car parking system, rfid car lock, rfid car parking, rfid based car parking system using arduino, rfid based car parking system, smart car parking, smart car parking system project using arduino, rfid car parking system project report, smart car parking using EM18,em18 car parking, clgproject, electronics project, buy project,em18 project, rfid, automatic parking, car parking, automatic car parking, automatic car parking project
RFID Based Smart Car Parking
Friends This is RFID Based Car Parking Project
There are 2 gates in the project
One is for Entrance
And another one is Exit Gate
Whenever an car comes at Entrance Gate
And RFID card is scanned
Gate automatically opened
And Balance of card is also shown on
Display
After the car's entry, gate automatically closes
Here total parking slots
IR Sensors are used in every slot
And whenever any car parked at slot
Status of slot shown on the display
whenever any car goes to exit gate
And gate opened after card is scanned,
And remaining balance also shown on exit side display
here amount is deducted according to Parking time
Amount increases with increasing time
In this project 10 INR is base charge and
and 2 INR for 1 minute
We can modify this in the code
here this car was parked for long time
That's why bill is High
But balance in RFID card is low
So "LOW BALANCE " notification is showing
And gate is not opening
So car owner can recharge his RFID Tag
Recharge Feature can be activated by pressing this button
after entering this feature
And now we can recharge our tag with different different amount
here we have total 3 buttons
And we can recharge ....... 1000 ....... 2000 ......... and 5000
Working Of Project
In this project An Arduino Nano is used
And two RFID modules connected to the Arduino Nano
These modules communicate to arduino via serial communication,
Two Servo motors are also connected to this
These Servo motors works as barrier gate
two I2C LCDs are also used
One is for Entry Gate
And Another one is for exit gate
Also 4 IR Sensors are used
We can increase or decrease number of sensors
if you guys love this project
You can purchase this project
Details related to purchase is in the description
you can purchase complete project
you can purchase the code of this project
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Credit :
Track: Elektronomia - Sky High pt. II [NCS Release]
Royalty Free Music provided by NoCopyrightSounds.
Watch: • Elektronomia - Sky Hig...
Free Download / Stream: ncs.io/SkyHigh2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amazing... Good work... Keep it up👍👍
Waw... Excellent project..👍
Thanks
please show me usig code
Walden
Show me the code and the circuit ❤
Bro can I get the code?
please show me using code
Can I used Arduino Uno instead of Arduino Nano?
Yes
I want the circuit
Please Mail me for more details
man.suthar2012@gmail.com
please show me using code
Please mail me for more details : man.suthar2012@gmail.com