Solidworks tutorial Design and Assembly of Engine

we will learn about sketch, extruded boss base, Revolved boss base, Extruded cut, Chamfer, fillet,Linear pattern, how to make plane assembly of parts, different kind of mate features, copy with mate feature in assembly, animation and Appearance setting features in Solidworks. below are the parts of engine
1)Piston
2)Piston Pin
3)Connecting Rod
4)crankshaft
5)Upper block
6)Lower block
#3DmodellinginSolidworks
#SolidworksAssembly
#solidworkstutorial
#solidworkstutorialforbeginners
1)Solidworks tutorial | Design of ball valve in Solidworks Part1
• Solidworks tutorial | ...
2)Solidworks tutorial Design of ball valve in Solidworks Part 2
• Solidworks tutorial De...
1)Solidworks tutorial for Beginners.
• SolidWorks Tutorial Fo...
2)Solidworks tutorial : Assembly
• Solidworks tutorial: A...
3)Solidworks tutorial vertical Stirling Engine
• SolidWorks Tutorial Ve...
4)Solidworks tutorial Forklift
• forklift Project in So...
5)Solidworks tutorial for beginners in Hindi
• SolidWorks Tutorial in...
6)Solidworks tutorial : Assembly in Hindi
• Solidworks tutorial in...
7)Solidworks Projects
• SolidWorks tutorial
like Facebook page.
/ cadcamtutorial
Subscribe our TH-cam Channel.
/ cadcamtutorial

[@user-lq9oh9bp8w]

Thank you so much. I learned a lot of new things, you have repainted lessons, everything is very clear. I don’t know the language, I understand a little, I like when you voice the numbers, I began to understand them slowly.

[@EngEbrahimMohammed3133]

thank you . you are the best solidworks teacher in the world

[@vedantdeokule]

Flawless teaching and explanation also is step by step so never felt like I was using some new software. Thanks alot sir !!! Got to learn alot.

[@arceskeleto5803]

Thank you for sharing your knowledge.

[@johnconrardy8486]

you are the best tutor so far on solidworks

[@dustinfletcher2831]

This is a great video and you consistently put out great content. My only comment is that the hole through the piston should be rotated 90 degrees from the cutout at the bottom of the piston, since the cutout is there to prevent the connecting rod from touching the sides of the piston.

[@hjalar]

Very nice video, thank you. This was very helpful! Now I will make a V12 :D

[@nimanorouzi6804]

thanks!!!!!
perfect teaching and designing!!!!

[@Jvst0nTime]

Thanks bro !! that was so good ! keep it up

[@LoneRanger2301]

Wow sir i just followed your steps..thanks alot😊

[@barscansahin1940]

Perfect, thank you

[@boualambba]

thanks a million, please keep sharing.

[@alisabry4697]

thank you , that's perfect

[@abdelz1617]

Thank you!

[@rahulan5026]

Thank you so much man!

[@WaqasAli-ed4of]

Please its my humble request that provide 2D diagrams for all the parts. It will be really helpful for us to design so that we can test ourselves. Thank you.

[@dheerajpatil1110]

Yess

[@TechNikalTM]

Yes

[@pinakiroy6639]

Thank you sir.. this video helped a lot!!

[@iamnotcool42]

Thanks man.

[@mohammeduzair1276]

Amazing design sir!!!!!!!

[@007TheMaaz]

Thanks man, but I copied the mate for 2nd and 3rd cylinder instead of mating again and it still works :) kudos

[@alexclem555]

Muito legal, Show!!!

[@hajaismail8795]

Hi Sir.
It was well helpful for me to get an idea of assembly and motion steady.Can you please create a belt curve conveyor and motion steady?

[@medrebay8490]

Thanks for the tutorial. I would like to ask you if you have the worksheets for this project

[@husnainakhtar4785]

EXCELLENT

[@sameerjaved4595]

Sir can u upload the design characteristics of the parts like soft copy and figures so we can practice on our own...

[@backandforthpoet1612]

Just make a rough sketch with the dimensions, then try on your own

[@anoops9685]

You can make a copy of whole connecting rod assembly and use it for the other 3 slots, I am sure it will work, But hey thanks, it was good rendition,

[@user-pv5yh4de6f]

기계원리가 대단하십니다

[@ajaysonawane8198]

Nice one.. Good

[@emirateszeytinci9002]

Your video is really beautiful, but if you share the technical drawing photos or pdfs of the parts drawn in the video, it would be really nice. Thank you.

[@Mahmil]

That moment when he says "See". Good tutorial btw!

[@niranjanbasavaraj5561]

Yes 😁😁

[@arunkumarm9824]

Good job sir🔥🔥

[@learnwithkrishnaacademy161]

good tutorial👍

[@romellojayathilake3419]

Superb model

[@mandarkadwekar6327]

can you do a video on how to select planes for skecting i get too much confused

[@w.binder-freecadchannel]

Very good! ;-)

[@DATusharRaj]

Thank you sir

[@singhjatt5650]

Nice video

[@carloschic1836]

Sir can you make a video of an Engine block that covers FEA Analysis?

[@raopune9]

thanks to all supporters

[@JK_Stark]

Assembly Finished Bhai❤

[@QueenFanka]

Thanks

[@alucard1031]

thx man

[@smo3241]

Can you make a video about engine parts construction and calculation?

[@nvcworld6423]

I am a creo user , can you do crank balancing in solid works ? If interested please let me know

[@wahiddinosamo]

Sir i used copy with mates at crankshaft postion 2 and 3 the results were still the same, can you expalin the concept of why you didint used

[@deepakraipure8350]

Sir drop some drwaing for assembly and parts on your next video

[@bhagyeshwavekar1728]

🔥🔥🔥🔥🔥

[@avulashandilya9884]

please make a video on carburetor parts

[@xxDestrierxx]

Where can i contact you? i have a question for a specific video you had uploaded, but i cant seem to find it now.

[@all_tech]

Super

[@deepseaoflove3683]

Thnk u sir

[@samlouise114]

Hi Sir, Do you have anything with at least 20+ parts?

[@AlexShmaleks]

17:50 mirror cutout

[@sarthakantarkar6230]

can u pls tell me material and appearance of the part ?

[@keshavbalajek8358]

Sir add some orthographic drawing with dimensions ,it would better to understand

[@anton.saikin9837]

Where do you take sizes for parts?

[@hoangthanhbinh4469]

nice

[@ahmadafiq6631]

Hello sir. I need your help. On minute 39, I cannot extruded and it shows “the sketch has intersecting contours”. I follow every instructions. Please help me sir

[@menardsoni1425]

Hi. Can anybody tell me how to show those icons next to Instant2D (i.e. normal to, isometric, dimetric and trimetric)

[@deeppatel8897]

please make video on realastic graphics😄

[@-slemantech6136]

👍🏻👍🏻👍🏻👍🏻👍🏻🌺

[@victormanuelnaranjoromero6639]

excellent contribution friend, where do you get the plans? any internet page?

[@vishwasb2406]

Superb..

[@ozanpek4695]

👊🏽

[@brianramos9584]

how many parts is this all in all?

[@chetanshinde1700]

Can you plz share the link to sketches

[@allenavadik59]

can you share us with sketch diamentions

[@karthigeyanravichardana.m.5097]

Bro indeed the sketch where did you get this

[@venytv1856]

Hod much assembly have this motor?

[@RahulSingh-by1yo]

Can you provide a report and ppt of this

[@mandarkadwekar6327]

can someone explain me why the crankshaft was created in right plane

[@ugurisaozer7602]

It doesn't matter. The important things is must be useful whole assembly

[@desiorcestra8794]

Sir please provide drawing also it help us to practice🙏🙏🙏

[@isaachaynes6935]

TH-cam really gotta cool it on the double ads smh

[@thaneshramesh8212]

HI SIR CAN I GET THE MEASUREMENTS PDF OF THIS PROJECT PLEASE SIR

[@oluwaseunayansoga4610]

can you send this via solid works

[@mashokgoud5677]

Provide detailed drawings

[@Itsmeandmy]

Sir plz can you provide solidworks files of this particular project

[@clintonchellan2374]

Hi what is "keep and condition" ???? the phrase that you are keep repeating

[@zeljkobey]

Can you share to dimensions for us?

[@praveenvenkatesan106]

Sofware downloading link......... It will be more helpful. For the beginners

[@tejaswini.m2022]

Yeah even I need that

[@harishjayarajp4945]

@@tejaswini.m2022 use getintopc

[@sodanprajapat3035]

Why upper block dimension is mistak

[@harish-rz1gk]

Pls share the 2d diagram of this video

[@exposedwahabiyataskplatfor3316]

Sir... Exercise book kaha milegi... Name of the Exercise Books... Pls sir...

[@rashidkhalil5384]

can anyone send me this whole engine in .sldprt format?

[@alimahmud8115]

do you still want it?

[@rashidkhalil5384]

@@alimahmud8115 nah bro, I passed the subject

[@user-rh9tj5nn7j]

Will you give me this design blueprint drawing?????

[@akhilvalupadasu3539]

What kind of engine is this? Name of engine?

[@joshuas3897]

Akhil Valupadasu Inline 4-cylinder engine

[@Raju24248]

you missed piston rings

[@duoheartgaming3805]

Where is piston crown

[@user-mb8nr6yc1b]

31.57

[@mohamedayman9113]

Hi sir, Can you send me a picture so I can draw it?

[@sulaimansamsudin7328]

28.30

[@kashan_solidworks7021]

آموزش سالیدورک از صفر تا صد لطفا به پیج ما سر بزنید

[@lilpuzeen]

too many ads

[@CRAMOSinnovations]

This is not an engine.. You can not make this nor make it work in anyway. No effort or thought has been put into the actual "Design" of this "engine" design. This is just a beginners modeling example. The fact that these models resemble an engine is irrelevant to what you're trying to conveying to new SW users.

[@leinex3117]

true that! what he's calling the Cam, is actually the crankshaft counterweight! It lacks the flywheel as well

[@kef1kef2kef3kef4kef5]

Good lord people, its a beginner SW tutorial. It's not supposed to reach production and he never said it could. Nor did he say that he is a car mechanic. The video is supposed to teach people how SW works, not how engines function...

[@HaasMill]

Why there is no cooling system?

[@brianramos9584]

how many parts is this all in all?

[@brianramos9584]

how many parts is this all in all?