How to Install/Upgrade The Intercooler on R56 Mini Cooper S (N14 &N18)

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 พ.ย. 2024

ความคิดเห็น • 34

  • @apridgen
    @apridgen 2 ปีที่แล้ว +9

    Just installed my intercooler after watching this video series, thanks for making these, you’ve got a new subscriber!

    • @TorvekMotors
      @TorvekMotors  2 ปีที่แล้ว +1

      Thanks Adam! I am happy I was able to help with the video.

    • @3dproje
      @3dproje ปีที่แล้ว +1

      Hey Adam, have you noticed any difference, does it increased the turbo lag?

    • @apridgen
      @apridgen ปีที่แล้ว

      @@3dproje i havent noticed any more turbo lag than stock, but it definitely pulls much harder now with the increased capacity of cool air getting fed into the turbo. It also helps the motor stay cooler when I'm at the track on a hot day.

    • @3dproje
      @3dproje ปีที่แล้ว +1

      @@apridgen thanx for reply 🙏🏼

  • @ronabbott2053
    @ronabbott2053 2 ปีที่แล้ว +1

    Excellent video and the introduction of the process makes it even better. Keep up the good work!

  • @FASperformance
    @FASperformance ปีที่แล้ว

    How did your intercooler hold up from now until then?

  • @EliasAnto
    @EliasAnto ปีที่แล้ว +1

    Did the crash bar go back on easily after installing the cooler?

  • @giuliogabrielaioani4488
    @giuliogabrielaioani4488 2 ปีที่แล้ว +1

    do you have to bleed the coolant before swapping intercoolers?

    • @TorvekMotors
      @TorvekMotors  ปีที่แล้ว +1

      There is no coolant in the intercooler. This is an air cooled intercooler

  • @mariamchacon7031
    @mariamchacon7031 2 ปีที่แล้ว

    Hey Theo; do you have a vid for installing a blow off valve for the mini?

  • @posplaytime801
    @posplaytime801 9 หลายเดือนก่อน

    Hey Theo! first of all you’re awesome man! Second I need help with my mini. I’m getting two codes: 287e and 2885. I ran a diagnostics but do you have any clues as to what or where to start looking. Thanks

    • @TorvekMotors
      @TorvekMotors  9 หลายเดือนก่อน

      Thanks buddy! I’d suggest asking this exact question in the mini forum. www.northamericanmotoring.com/

  • @ChevyTwins
    @ChevyTwins 3 ปีที่แล้ว +2

    Did the intercooler help maintain intake air temps? My girlfriend and I just picked up a 2014 Mini Cooper s 6 speed for her. I am looking to do bolt ons and stage 2 tune at some point.

    • @TorvekMotors
      @TorvekMotors  3 ปีที่แล้ว +1

      It takes a bit longer for the car to warm up. You really feel the engine breathing more. Idk how i can explain it. However the real moment you see the intercooler shining is when you tune it. To keep the intake temp low, you need to do everything to ensure heat does not come close to the intake area. My intake temp are usually a few degrees lower than the ambient temp during driving. When I stop it increase a bit.

    • @jainisnotresting
      @jainisnotresting 3 ปีที่แล้ว +1

      @@TorvekMotors how/whered you get it tuned?

  • @falconarcadegaming5510
    @falconarcadegaming5510 7 หลายเดือนก่อน

    Dont you need to tune the car afterwards since the innercooler is bigger?

    • @dennisrobinson2403
      @dennisrobinson2403 หลายเดือนก่อน

      Yes, you should. The PCM can only compensate for so much fuel to add the engine given the air volume supplied from the MAF sensor. But most people don't tune after so no harm no foul. May get lean codes though.

  • @perlacristo8712
    @perlacristo8712 3 ปีที่แล้ว

    Can you tell me what is that for

  • @jonathanroger4798
    @jonathanroger4798 ปีที่แล้ว

    Thanks mate very helpful

  • @tutemre
    @tutemre 3 ปีที่แล้ว +1

    Bro where did u jack up the car in front? Oil pan?

    • @TorvekMotors
      @TorvekMotors  3 ปีที่แล้ว

      I jacked up the car from the jack point. Not sure if the video shows it.

  • @MickehPuppeh
    @MickehPuppeh 2 ปีที่แล้ว +2

    Great video, thank you so much! Considering doing this job on my N18 Cooper before having it tuned as well. How big of a difference does it really make?

    • @TorvekMotors
      @TorvekMotors  2 ปีที่แล้ว

      Thanks! The temperature dropped a little. But the engine didn’t feel cripple like it did before.

    • @3dproje
      @3dproje ปีที่แล้ว

      @@TorvekMotors bigger IC blocks some part of radiator, does it badly effect cooling performance? Thnx

    • @ZwolseZwerver
      @ZwolseZwerver ปีที่แล้ว +1

      ​@@3dproje it really shouldn't, air flows through both coolers. I have a big intercooler like this, and with my Ultraugauge it still shows coolant temperatures of around 98 degrees Celsius when warm. It doesn't overheat.

    • @3dproje
      @3dproje ปีที่แล้ว

      @@ZwolseZwerver thnx for reply dexter, does it moves between 98 and 104 degrees?

  • @crypticsol6449
    @crypticsol6449 3 ปีที่แล้ว +1

    Is there any benefit from getting a $700 intercooler vs. $170

    • @TorvekMotors
      @TorvekMotors  3 ปีที่แล้ว

      They would normally function the same way. However, built quality sometimes differ between the cheap ones and $$ ones. However, some cheap ones like the one I got have good quality. Thanks

    • @FreshBeatsification
      @FreshBeatsification 3 ปีที่แล้ว

      170$ one will work just fine.

  • @eazypic
    @eazypic 2 ปีที่แล้ว

    Anyone know the dems or brand / link?

  • @jackvallejo2093
    @jackvallejo2093 2 ปีที่แล้ว

    Where is your shop located?