Well he made that look easy...especially the wiring. Halogen ovens are a great example of how manufacturers don't want people to be able to do what should be a simple bulb replacement. They'd much prefer that people just bought a new oven when the bulb blows.
The manufacturers clearly don't want you to be able to replace the bulb. It's a terrible design. They want you to throw it all away and buy a complete new one. What a wasteful society we are forced to live in.
This guy is a pro. Looks like he works in the assembly line, browsing at the tools and bits he's got on the work bench, woah! BTW, this model needs one hell of work to finish. To me, I would take a photo before each step to ensure parts will return to the same place when finish. Heard Cantonese @ 1:47 and from the power plug configuration, guess it's shot in Hong Kong.
I once took this lid only half apart to clean some rust off. It took me 10 mins to take a few screws and bolts out, then took me over an hour to put it back to together, cause I couldn't remember exactly how to do it 🤦♂️ This dude strips it , replaces the bulb and puts it back together in 6min & 55 secs 😳 FML 😂
I did mine like this but there is a simpler way using a ceramic block joiner, if you are not that experienced I would go for the block method as there is very little dismantling that's what I may do in future, you need tools and crimping joiners for the method shown here. I had problems with twisting the wires together and getting them into crimp joiner, some came loose every time I tried to crimp them,frustrating. It looks like he is using a brand new appliance which makes everything much easier. whatever method clean the bulb with alcohol after touching it as your skin oils will create hot spots which will overheat the bulb. and burn it out quicker ! These appliances are very cheap in the UK on Amazon ,frankly I may even buy a new one next time and save a lot of hassle.!!!
You can also cut the wires off the bulb (after you first remove the circular holder) leaving room on the wires to attach them to a ceramic wire block. Then you attach the new bulb wires into the block and place the bulb in its proper place. Easier then this complete breakdown.
Bloody hell, all that just to change a bulb? There is a quicker way of doing it which i saw in another video. You just cut the old bulb off leaving enough wire to attach the new bulb. I would put small connectors on the wire from the oven. That way you just pull the old bulb out next time and reattach the new bulb via the connectors.
Replaced mine in half the time of this video, however, discovered that element sent from China was for 220 volts (not 110-120 US) so I got to replace it twice... Friendly warning: most of the world outside of US is 220-240 AC.
The link for the other video is for a different model with a much easier panel to detach bulb. Unfortunately, this model requires much work. I’m unsure how to reconnect the black temperature knob, it is loose. If anyone has successfully completed this & knows how to attach that knob or dial please comment.
All these air fryers now... and they tell you never to touch halogen bulbs with your fingers because finger oil can destroy them, but they are suppose to work with cooking grease all over them? Had a Gourmia 2500 lamp die in less than a month
TheBeefiestable Seriously! The bulb in mine just fried, pun intended, and here I am watching this very complicated surgical procedure that I’m not sure if I’m capable of doing, lol
Bulb has no removable connections, requires removal of crimps for servicing. It is very likely that the average home user would mix wires up and electrocute themselves. The bulb should have a dedicated connection that is easily removable. Also the power and heat indicator lights form part of the main circuit, if they blow the cooker will not work. Can anyone tell me what type/ rating of bulbs the indicator lights actually are.?
I think halogen ovens a great for cooking but are let down buy the design and the fact that the bulbs are only guaranteed for 3 months so based on current cost if you replaced it every 3 months would work out £40 a year for the bulbs that assumes one could change the bulb oneself but if you had to send in to the suppler would encore extra costs for postage and handling. So all in all halogen ovens are in fact the worse oven every invented, I would prefer an air fryer less hassle.
Our identical Salter Air Fryer pro is now 6 yrs. old, ( sept 2022) it gets used almost every day at least once. It's no hassle to wipe the majority of oils & grease out on a kitchen towel every time it's been used & has still got a litle warmth in it., The pan, lift & grid go in the dish washer for the cheap rate over night wash. Every couple of days it's set on the 65 oC cleaning level, we add four or five drops of liquid soap / dish drops, then a pint & a half of boiling water to the main bowl with or without the grid & lift in place. Then close it up & set it for 12 to 20 min. cleaning, whilst we do other things. After this time has elapsed allow it to cool to hand hot, unplug it and simply wipe the crud off using a micro fibre cloth & the hot soapy water in the bowl. Remove the bowl & then use the hot soapy cloth to clean the inside and outside of the glass & plastics. Don't get too energetic doing this or you'll rub off the decals showing temp and what to cook. Useful tip :- I've used this TH-cam clip to photograph the decals then used a fine ball tip in my Dremel to engrave & re-mark the information so it won't rub off again .
This is way too much to just change the bulb. Who designs these things? Didn’t they ever think the bulb would need replacing? I don’t think grandma would be able to do this, lol
If i had to go thru what you did to replace a halogen bulb then 1 I don't have the tools and 2 I would rather wait till the bulb goes then dump the oven and buy an air fryer.
Could anybody PLEASE SHOW A PICTURE of the WIRING??? I'm such an idiot and removed the lamp some weeks ago, now i want to replace it and do remember the wiring… hahaha heeeelp, i'm close to getting crazy because of this shit!!! :-D
I just changed mine. Assuming you were talking about the nut holding the fan, as with most nuts on a motor spindle, this one is left hand thread, you turn clockwise to loosen. Watch carefully at 0:20, he was holding the nut stationary with the pair of pliers and rotating the fan anti-clockwise, effectively turning the nut clockwise.
Well he made that look easy...especially the wiring. Halogen ovens are a great example of how manufacturers don't want people to be able to do what should be a simple bulb replacement. They'd much prefer that people just bought a new oven when the bulb blows.
The manufacturers clearly don't want you to be able to replace the bulb. It's a terrible design. They want you to throw it all away and buy a complete new one. What a wasteful society we are forced to live in.
Well you could keep the glass bowl for other things lol.
This guy is a pro. Looks like he works in the assembly line, browsing at the tools and bits he's got on the work bench, woah! BTW, this model needs one hell of work to finish. To me, I would take a photo before each step to ensure parts will return to the same place when finish. Heard Cantonese @ 1:47 and from the power plug configuration, guess it's shot in Hong Kong.
It's a female
Gawd. I think I'll buy a new one.
Yeah just add to the land fill.
I agree, just buy a new one, beyond my talents.
I once took this lid only half apart to clean some rust off. It took me 10 mins to take a few screws and bolts out, then took me over an hour to put it back to together, cause I couldn't remember exactly how to do it 🤦♂️ This dude strips it , replaces the bulb and puts it back together in 6min & 55 secs 😳 FML 😂
I did mine like this but there is a simpler way using a ceramic block joiner, if you are not that experienced I would go for the block method as there is very little dismantling that's what I may do in future, you need tools and crimping joiners for the method shown here. I had problems with twisting the wires together and getting them into crimp joiner, some came loose every time I tried to crimp them,frustrating.
It looks like he is using a brand new appliance which makes everything much easier. whatever method clean the bulb with alcohol after touching it as your skin oils will create hot spots which will overheat the bulb. and burn it out quicker !
These appliances are very cheap in the UK on Amazon ,frankly I may even buy a new one next time and save a lot of hassle.!!!
You can also cut the wires off the bulb (after you first remove the circular holder) leaving room on the wires to attach them to a ceramic wire block. Then you attach the new bulb wires into the block and place the bulb in its proper place. Easier then this complete breakdown.
This doesn't look like something average person wants to do! tyvm
Bloody hell, all that just to change a bulb? There is a quicker way of doing it which i saw in another video. You just cut the old bulb off leaving enough wire to attach the new bulb. I would put small connectors on the wire from the oven. That way you just pull the old bulb out next time and reattach the new bulb via the connectors.
Dont get deceived. Its real difficult fixing a halogen oven that bit rusty . Getting those first layer screws can be HELL 😮
Sod that for a lark! Think I’ll buy a frying pan!!
Thanks 🙏
The hardest part is to remove the plastic cap at the end of the wires without damaging the wires.
Very good. Thanks
These glass type glass bowl air fryer bulbs have a rating of 1000 hours
Is there a way to carefully pull the 2 wires out of the bulb itself, saving huge amounts of work, then pushing them into a new bulb?
Touching a Halogen bulb with your hands is never good. The oil on your hands can cause the bulb to overheat and explode/blow...
Yes, but does it work now?
A bit long windid just to change a bulb but great video
Also not recommended to touch the glass bulb when installing can create hot spots on bulb
Clean the bulb with 99% isopropanol before and after you put it in so you get all finger marks & grease of theblamp.
One should not handle the TUBE note the word tube, (bulbs grow in the ground) directly💛😁😂 wear groves!
Replaced mine in half the time of this video, however, discovered that element sent from China was for 220 volts (not 110-120 US) so I got to replace it twice... Friendly warning: most of the world outside of US is 220-240 AC.
The link for the other video is for a different model with a much easier panel to detach bulb. Unfortunately, this model requires much work. I’m unsure how to reconnect the black temperature knob, it is loose. If anyone has successfully completed this & knows how to attach that knob or dial please comment.
can I see the correct cable connections and couplings?
All these air fryers now... and they tell you never to touch halogen bulbs with your fingers because finger oil can destroy them, but they are suppose to work with cooking grease all over them? Had a Gourmia 2500 lamp die in less than a month
TheBeefiestable Seriously! The bulb in mine just fried, pun intended, and here I am watching this very complicated surgical procedure that I’m not sure if I’m capable of doing, lol
Looks like we all lucked out. A slightly different model is much easier to fix: th-cam.com/video/b5hAaWAx4oA/w-d-xo.html
Bulb has no removable connections, requires removal of crimps for servicing.
It is very likely that the average home user would mix wires up and electrocute themselves.
The bulb should have a dedicated connection that is easily removable.
Also the power and heat indicator lights form part of the main circuit, if they blow the cooker will not work.
Can anyone tell me what type/ rating of bulbs the indicator lights actually are.?
Can I pay you to replace my bulb please...lol
Does the polarities of the wires matter? The replacement bulb I bought has 2 white wires with no writing on them.
No it would not matter
Hi,i Anyone know if I can replace the bulb in a VonShef digital Halogen model no 07/091 ?
donde se puede comprar el halogen bulb, para reemplazarlo
Where can I buy a Halogen bulb for my USHA Halogen Air Fryer
Which wires go together as mine came loose
Can this type of air fryer accept a ceramic heating element also same circumference size and wattage
yes but ceramic heating element produce ash compare to halogen bulb that dont produce ashes that may fall onto your food.
Wow what a hassle. How longdo they last? The nuwwave uses a sheath heater instead of a halogen bulb. Might go with the nuwave
I've had it about four years now the bulb gave out. I plan to change the halogen bulb.
I think halogen ovens a great for cooking but are let down buy the design and the fact that the bulbs are only guaranteed for 3 months so based on current cost if you replaced it every 3 months would work out £40 a year for the bulbs that assumes one could change the bulb oneself but if you had to send in to the suppler would encore extra costs for postage and handling. So all in all halogen ovens are in fact the worse oven every invented, I would prefer an air fryer less hassle.
Our identical Salter Air Fryer pro is now 6 yrs. old, ( sept 2022) it gets used almost every day at least once.
It's no hassle to wipe the majority of oils & grease out on a kitchen towel every time it's been used & has still got a litle warmth in it., The pan, lift & grid go in the dish washer for the cheap rate over night wash.
Every couple of days it's set on the 65 oC cleaning level, we add four or five drops of liquid soap / dish drops, then a pint & a half of boiling water to the main bowl with or without the grid & lift in place. Then close it up & set it for 12 to 20 min. cleaning, whilst we do other things.
After this time has elapsed allow it to cool to hand hot, unplug it and simply wipe the crud off using a micro fibre cloth & the hot soapy water in the bowl. Remove the bowl & then use the hot soapy cloth to clean the inside and outside of the glass & plastics.
Don't get too energetic doing this or you'll rub off the decals showing temp and what to cook.
Useful tip :-
I've used this TH-cam clip to photograph the decals then used a fine ball tip in my Dremel to engrave & re-mark the information so it won't rub off again .
@@davidgould8708 my first bulb lasted about two years and I use it a lot..
This is way too much to just change the bulb. Who designs these things? Didn’t they ever think the bulb would need replacing? I don’t think grandma would be able to do this, lol
That looks sooo long😫
If i had to go thru what you did to replace a halogen bulb then 1 I don't have the tools and 2 I would rather wait till the bulb goes then dump the oven and buy an air fryer.
What exactly do you think an air fryer is?
How do I get my fan to work it won't come on but light comes on
Where do u get the bulb
Amazon $14
Could anybody PLEASE SHOW A PICTURE of the WIRING???
I'm such an idiot and removed the lamp some weeks ago, now i want to replace it and do remember the wiring… hahaha heeeelp, i'm close to getting crazy because of this shit!!! :-D
Me too
That's a brand new unit. You can NOT get the fan nut off of a used unit! I tried and it CANNOT be done.
Lol next time buy air fryer with metal coil element. Mine was super cheap.
@@jeh5c What brand and price? Thanks in advance.
Most stupids design ever. Thing is that once it has been used, the nut sticks and is virtually impossible to remove. Mine just will not come off.
I just changed mine. Assuming you were talking about the nut holding the fan, as with most nuts on a motor spindle, this one is left hand thread, you turn clockwise to loosen. Watch carefully at 0:20, he was holding the nut stationary with the pair of pliers and rotating the fan anti-clockwise, effectively turning the nut clockwise.
@@takew4694
Congratulations, you just saved me typing that reply to the naive tinkerer.😉
One awful job...