WPL C14 Hilux part 3: fitting hobby-grade RC to kit version
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- This video shows hobby-grade RC being installed on the kit version of the WPL C14 Hilux RC truck. At this price point (truck cost £25.52 incl postage on Ebay) the truck is pretty amazing after the upgrades. Please like, comment - and if you haven't already done so, subscribe to the channel.
Great vid, lots of good tips, sofa climb really impressed me
Thank you, glad you enjoyed it. These are impressive little trucks. 🙂
RC Modders I have a c24 on order so can't wait for it to turn up, the ramp test impressed me
These trucks are surprisingly capable - I'm sure you will really enjoy it when it comes.
Great JOB!
Thank you! Cheers! 😀👍
Hey I have a tip, put a magnet at the end of the screw driver so it’s easier to put screws in its place accurately
Excellent tip! Now I have a numbers of small rare earth magnets I should try to remember to do that, I believe the screwdrivers become magnetised quite quickly anyway if you do that. 😀👍
definitely check out Gabriel Silvaz channel about these WPL's. he fabs a transfer case for a pair of 12v 300 RPM geared N20 motors (1 for front 1 for rear). an inexpensive little light weight 20A brushed ESC, light weight 2S LiPo. a 180 motor is too much power and speed for their own good, and things break. the N20's provide really steady torque for crawling, his other videos demonstrate its capabilities after the simple mod, and you're not going to believe the kinds of places he drives them through (wear a chin strap!).
on that, I do think WPL needs to re-visit their motor gearbox, a 130 size motor would be plenty if they added another reduction gear to cut speed to about 1/3. if sold as a "crawler transmission" optional replacement part, they would see a lot of orders for them quickly. also think they do need to build their drive shafts and gears a little bit larger and stronger in the axles, the "heavier duty" replacement parts would sell. for the Toyota series about 3/8" body lift (longer screws and bits of tubing) and 1/4" longer travel softer spring/shocks "crawler upgrade suspension kit" is another package they could do well with producing, it would increase it's articulation quite a bit. for their military trucks, the first thing I noticed was way too much kink in the U-joints, for the drive shafts being at such extreme angles.
the language barrier between English and Chinese makes things difficult sometimes.
I agree with a lot of what you say. I see that that there are a lot of replacement metal parts for these which may help. The axles are great looking scale. I think though, that for the low price that these are great value. I have just insalled the transmission and axles into a Bruder Jeep Wrangler TJ and will probably want to upgrade the parts. I hope that I will doing this video today. Thank you for your comment.
It's strange that kit comes with a different motor and apperantly softer tires. I believe I'm gona don't dual motor route as it had better ground clearance. But getting a proper esc and receiver will be my first thing to do as proportional steering is a must!! Lol
agreed. good luck with the mods!👍
I'm not sure if ya mentioned it but are the shocks plastic and are they spring loaded or fluid filled? Do they sale parts for this truck? Great video my friend. Keep up the good work and take care.
Thank you for your kind comments. The shocks are plastic with springs (no oil). I think that spares and upgrades are available. The kit for the truck is also very inexpensive compared with most other other hobby grade RC models.
Thank you for getting back to me buddy. Thank you for the info. Keep up the good work, bye.
Great video. You already have a new subscriber. Could you tell me what ESC I can use, make and model? Where have you bought the ESC and batteries? Sorry but my English is not very good, Thanks
I tend to use the cheap 20 amp speed controllers from amazon : rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&toolid=11800&pub=5575486648&campid=5338486327&mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2F10A-Bustophedon-ESC-Brushed-Speed-Controller-BEC-5V-1A-For-RC-Car-Truck-Boat-FA%2F113153672041%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649
@@RCModders Thank you!!!!
i'm new to this and planning on ordering a WPL C RC for the start, so if i want to install the esc can i still use the existing controller?or can u give me the link of what parts do i have to prepare to upgrade my incoming WPL to a hobby grade? thx before
Sorry for the delay, I forgot that I had a comments approval filter on. This was the kit version, so only came with the servo. For a hobby grade conversion, you will need a servo, receiver and speed controller (ESC). There are may options, but need to be small enough to fit and the servo needs to be the right size.
Put all metal upgrades to make it a monster
Does it use a micro servo? Thanks!
Yes. Many of the small ones from Hobbyking will do the job. 😀👍
good work but, it s turn badly not ?
Thank you. I was was pleased with the results.
where u buy that gearbox with motor?
Gearbox and motor are part of the kit version of the truck.
Subbed!
Thank you!
What kind of esc?
I just used a standard TEU 105B Tamiya one.
what voltage battery have you used ?
This was a little 7.2v NiMh battery pack from Component shop : www.componentshop.co.uk/7-2v-1600mah-nimh-2-3a-lst-hpi-losi-mini-t-etc.html